Underground System : Serial to Ethernet for Mining Automation

 
Underground System
Serial to Ethernet for Mining Automation
square-arrow-blue Improve Safety of Miners with Automated Underground Monitoring
 
Since the computation is reaching to every part of the world, coal miners from Africa also got benefited from it. standards and meet new laws, a decision was made to upgrade the current legacy system with new Ethernet Communication and data streaming in our target mine needed to be improved and upgraded to ensure higher in the underground environment.

Mining operations are being equipped with sophisticated industrial controls and sensors for safety and operating many mining applications, data is combined with information from sensors and industrial controls, not only pushing requirements up but also to reduce the electromagnetic interference; hence forcing to deploy fiber optics.
   
square-arrow-blue Requirements
 
The purpose of this project was to establish a surface-to-underground communication to manage routine sensors, alarms and serial devices. Another requirement for the system was to link and administrate the group of mines. The control office on the surface has complete access of every activity inside the mines. Using the Ethernet, underground air quality is also monitored to see whether it is safe for workers to enter the mine. Carbon Monoxide (CO) sensors and Methane sensors are used for this purpose. Lightning was very common in the area.
   
square-arrow-blue Solution
 
A combination of Managed Switches and Fiber Device Servers met the requirements perfectly. The flexibility of the optical ports offered the ideal solution for performing central and remote management of the distributed network architecture. Now the mine´s management can manage up to 256 serial devices via Virtual COM port drivers, and Ring-based technology can be adopted for the connectivity without any failure. The fiber-optical cables offer the mine maximum data integrity from high incidence of lightning.
   
square-arrow-blue Why SUNIX
 
gray-arrow Extended serial to Ethernet communication solutions range.
gray-arrow Higher reliability with Ethernet redundancy.
gray-arrow Reliability with fiber optic conversion of serial transmission.
   
 
The use of Ethernet products in the mine has provided a much safer working environment. The Ethernet keeps information flowing at all times, streaming data about the status of workers and equipment -- and about whether conditions are safe for workers to be in the mine. The rugged outer case of products is ideal for mining environments, providing protection for the highly durable internal electronics. The fiber optics provides flexibility and cost-effectiveness while offering the highest level of data integrity, especially in the lightning season. The mine can perform its daily operations more safely and more confidently. Device Servers removed the bottleneck created by the need to monitor and manage a large number of serial devices via the Ethernet.
   
square-arrow-blue Application
                        
   
square-arrow-blue Key Products
  ESW-8062MM
DS-3010M
   
 
 

Underground System : Serial to Ethernet for Mining Automation

 
Underground System
Serial to Ethernet for Mining Automation
square-arrow-blue Improve Safety of Miners with Automated Underground Monitoring
 
Since the computation is reaching to every part of the world, coal miners from Africa also got benefited from it. standards and meet new laws, a decision was made to upgrade the current legacy system with new Ethernet Communication and data streaming in our target mine needed to be improved and upgraded to ensure higher in the underground environment.

Mining operations are being equipped with sophisticated industrial controls and sensors for safety and operating many mining applications, data is combined with information from sensors and industrial controls, not only pushing requirements up but also to reduce the electromagnetic interference; hence forcing to deploy fiber optics.
   
square-arrow-blue Requirements
 
The purpose of this project was to establish a surface-to-underground communication to manage routine sensors, alarms and serial devices. Another requirement for the system was to link and administrate the group of mines. The control office on the surface has complete access of every activity inside the mines. Using the Ethernet, underground air quality is also monitored to see whether it is safe for workers to enter the mine. Carbon Monoxide (CO) sensors and Methane sensors are used for this purpose. Lightning was very common in the area.
   
square-arrow-blue Solution
 
A combination of Managed Switches and Fiber Device Servers met the requirements perfectly. The flexibility of the optical ports offered the ideal solution for performing central and remote management of the distributed network architecture. Now the mine´s management can manage up to 256 serial devices via Virtual COM port drivers, and Ring-based technology can be adopted for the connectivity without any failure. The fiber-optical cables offer the mine maximum data integrity from high incidence of lightning.
   
square-arrow-blue Why SUNIX
 
gray-arrow Extended serial to Ethernet communication solutions range.
gray-arrow Higher reliability with Ethernet redundancy.
gray-arrow Reliability with fiber optic conversion of serial transmission.
   
 
The use of Ethernet products in the mine has provided a much safer working environment. The Ethernet keeps information flowing at all times, streaming data about the status of workers and equipment -- and about whether conditions are safe for workers to be in the mine. The rugged outer case of products is ideal for mining environments, providing protection for the highly durable internal electronics. The fiber optics provides flexibility and cost-effectiveness while offering the highest level of data integrity, especially in the lightning season. The mine can perform its daily operations more safely and more confidently. Device Servers removed the bottleneck created by the need to monitor and manage a large number of serial devices via the Ethernet.
   
square-arrow-blue Application
                        
   
square-arrow-blue Key Products
  ESW-8062MM
DS-3010M
   
 
 

Underground System : Serial to Ethernet for Mining Automation

 
Underground System
Serial to Ethernet for Mining Automation
square-arrow-blue Improve Safety of Miners with Automated Underground Monitoring
 
Since the computation is reaching to every part of the world, coal miners from Africa also got benefited from it. standards and meet new laws, a decision was made to upgrade the current legacy system with new Ethernet Communication and data streaming in our target mine needed to be improved and upgraded to ensure higher in the underground environment.

Mining operations are being equipped with sophisticated industrial controls and sensors for safety and operating many mining applications, data is combined with information from sensors and industrial controls, not only pushing requirements up but also to reduce the electromagnetic interference; hence forcing to deploy fiber optics.
   
square-arrow-blue Requirements
 
The purpose of this project was to establish a surface-to-underground communication to manage routine sensors, alarms and serial devices. Another requirement for the system was to link and administrate the group of mines. The control office on the surface has complete access of every activity inside the mines. Using the Ethernet, underground air quality is also monitored to see whether it is safe for workers to enter the mine. Carbon Monoxide (CO) sensors and Methane sensors are used for this purpose. Lightning was very common in the area.
   
square-arrow-blue Solution
 
A combination of Managed Switches and Fiber Device Servers met the requirements perfectly. The flexibility of the optical ports offered the ideal solution for performing central and remote management of the distributed network architecture. Now the mine´s management can manage up to 256 serial devices via Virtual COM port drivers, and Ring-based technology can be adopted for the connectivity without any failure. The fiber-optical cables offer the mine maximum data integrity from high incidence of lightning.
   
square-arrow-blue Why SUNIX
 
gray-arrow Extended serial to Ethernet communication solutions range.
gray-arrow Higher reliability with Ethernet redundancy.
gray-arrow Reliability with fiber optic conversion of serial transmission.
   
 
The use of Ethernet products in the mine has provided a much safer working environment. The Ethernet keeps information flowing at all times, streaming data about the status of workers and equipment -- and about whether conditions are safe for workers to be in the mine. The rugged outer case of products is ideal for mining environments, providing protection for the highly durable internal electronics. The fiber optics provides flexibility and cost-effectiveness while offering the highest level of data integrity, especially in the lightning season. The mine can perform its daily operations more safely and more confidently. Device Servers removed the bottleneck created by the need to monitor and manage a large number of serial devices via the Ethernet.
   
square-arrow-blue Application
                        
   
square-arrow-blue Key Products
  ESW-8062MM
DS-3010M
   
 
 

Underground System : Serial to Ethernet for Mining Automation

 
Underground System
Serial to Ethernet for Mining Automation
square-arrow-blue Improve Safety of Miners with Automated Underground Monitoring
 
Since the computation is reaching to every part of the world, coal miners from Africa also got benefited from it. standards and meet new laws, a decision was made to upgrade the current legacy system with new Ethernet Communication and data streaming in our target mine needed to be improved and upgraded to ensure higher in the underground environment.

Mining operations are being equipped with sophisticated industrial controls and sensors for safety and operating many mining applications, data is combined with information from sensors and industrial controls, not only pushing requirements up but also to reduce the electromagnetic interference; hence forcing to deploy fiber optics.
   
square-arrow-blue Requirements
 
The purpose of this project was to establish a surface-to-underground communication to manage routine sensors, alarms and serial devices. Another requirement for the system was to link and administrate the group of mines. The control office on the surface has complete access of every activity inside the mines. Using the Ethernet, underground air quality is also monitored to see whether it is safe for workers to enter the mine. Carbon Monoxide (CO) sensors and Methane sensors are used for this purpose. Lightning was very common in the area.
   
square-arrow-blue Solution
 
A combination of Managed Switches and Fiber Device Servers met the requirements perfectly. The flexibility of the optical ports offered the ideal solution for performing central and remote management of the distributed network architecture. Now the mine´s management can manage up to 256 serial devices via Virtual COM port drivers, and Ring-based technology can be adopted for the connectivity without any failure. The fiber-optical cables offer the mine maximum data integrity from high incidence of lightning.
   
square-arrow-blue Why SUNIX
 
gray-arrow Extended serial to Ethernet communication solutions range.
gray-arrow Higher reliability with Ethernet redundancy.
gray-arrow Reliability with fiber optic conversion of serial transmission.
   
 
The use of Ethernet products in the mine has provided a much safer working environment. The Ethernet keeps information flowing at all times, streaming data about the status of workers and equipment -- and about whether conditions are safe for workers to be in the mine. The rugged outer case of products is ideal for mining environments, providing protection for the highly durable internal electronics. The fiber optics provides flexibility and cost-effectiveness while offering the highest level of data integrity, especially in the lightning season. The mine can perform its daily operations more safely and more confidently. Device Servers removed the bottleneck created by the need to monitor and manage a large number of serial devices via the Ethernet.
   
square-arrow-blue Application
                        
   
square-arrow-blue Key Products
  ESW-8062MM
DS-3010M
   
 
 
Back to top
返回頂部
返回頂部