UPA2015
USB3.2 Gen2 10G & DisplayPort Alt-Mode PCI Express Host Card with Dual USB Type-C Receptacles
- PCI Express Base Specification Revision 3.0 two-lane (x2).
- Expands dual external USB3.2 Gen2 Super-Speed plus Type-C port (DFP) on the system.
- Compliant with Universal Serial Bus 3.2 specification Gen2.
- Compliant with xHCI (eXtensible Host Controller Interface) specifications Revision 1.1.
- Supports simultaneous operation of multiple USB 3.2 Gen2/Gen1, USB 2.0 and USB 1.1 devices
- Supports USB data transfer rate of 10G/5G/480/12/1.5 Mbps.
- Independent 10G USB PHY for each USB Type-C port.
- USB port supplies +5VDC / 1.5A power output to USB device with over current protection.
- Compliant with DisplayPort 1.4 spec with HDTV 4K (2160p) resolution and stereoscopic 3D.
- One USB-C compliant with VESA DisplayPort Alternate Mode for USB Type-C Standard Rev1.0.
- Hot-swapping feature allows connect/disconnect device without powering down the system.
- Driver supports for Microsoft Windows 8.x, 10 and 11 operation systems.
- Certified by Electromagnetic Compatibility (CE, FCC, VCCI, BSMI) and RoHS approval.
Introduction
SUNIX UPA2015 is a Dual-port Super-Speed+ USB3.2 Gen2 10G PCI Express add-on card, and it’s compliant with the PCI Express Gen3 specification for host PC system. Based on USB Type-C pure DFP (Downstream Facing Port) mode, it works up to 10 Gbps for data transfer when connecting to USB 3.2 Gen2 compliant peripherals, while maintaining compatibility with existing USB peripheral devices. USB3.2 Gen2 performance is 2 times faster than USB3.2 Gen1 and 20 times faster than USB2.0 connectivity. In additional, one USB Type-C port supports DisplayPort Alternate-mode for video output, and the other is an USB data-only port
With USB Type-C Receptacle, SUNIX UPA2015 supports reversible plug orientation and cable direction, which means that users will no longer need to be concerned with plug orientation/cable direction, making it easier to plug in. The new connector is smaller and thinner design, but drive higher power output capacity to USB device. SUNIX UPA2015 supports 5VDC@1500mA power output to USB device with over current protection on each USB port. This card is an ideal choice for external storage, smart phone, webcam, video devices, and all other USB electronic devices.
With USB Type-C Receptacle, SUNIX UPA2015 supports reversible plug orientation and cable direction, which means that users will no longer need to be concerned with plug orientation/cable direction, making it easier to plug in. The new connector is smaller and thinner design, but drive higher power output capacity to USB device. SUNIX UPA2015 supports 5VDC@1500mA power output to USB device with over current protection on each USB port. This card is an ideal choice for external storage, smart phone, webcam, video devices, and all other USB electronic devices.
Features
Specifications
Hardware
| BUS | PCI Express Spec 3.0x2, (compliant with x4/x8/x16 slot) | ||
| Controller | PCI Express USB 3.2 Gen2 Host controller, Asmedia ASM3142 | ||
| USB Standard | eXtensible Host Controller Interface (xHCI) Rev1.1 | ||
| IRQ & IO | Assigned by System | ||
USB Communication
| Interface | Universal Serial Bus 3.2 Gen2 / Gen1 / 2.0 / 1.1 |
| Speed | SuperSpeed+(10Gbps), SuperSpeed(5Gbps), High Speed (480Mbps), Full Speed (12Mbps), Low Speed (1.5Mbps) |
| No. of Port | 2-port |
| PCB Connector | USB 3.1 USB Type-C port (Downstream Facing Port) |
| Protection |
±15KV IEC61000-4-2 Air Gap Discharge ±8KV IEC61000-4-2 Contact Discharge |
Video / Audio
| Input Interface | Standard DisplayPort Female, DisplayPort Ver1.4/1.2 |
| Output Interface | USB Type-C port |
| Audio | Yes (audio pass-through) |
Power
| Source | PCI Express Bus Power |
| Output Capacity |
USB Type-C Port: Power Delivery +5VDC / 1.5A / each port Note: Total power output capacity will be limited by system power supply. |
| Over Current Protection |
USB Type-C Port: +5VDC / 1.5A / each port / Power Switch |
| Power Consumption | 3.0W @ 3.3V (board only without power output to USB device) |
Driver Support
| Windows | Windows 8.x / 10 (X86/X64) / 11 (Windows in-box driver) |
Environment
| Operation Temperature | 0 to 60°C (32 to 140°F) |
| Operation Humidity | 5 to 95% RH |
| Storage Temperature | -20 to 70°C (-4 to 158°F) |
Regulatory Approvals
| EMC | CE, FCC, VCCI, BSMI |
| Green | RoHS, CRoHS, WEEE |
Physical Characteristics
| PCB Dimension | 85.30x 55.75 mm |
| Bracket | Standard 120 mm (Low Profile 80mm) |
| Bracket Space | 1 |
Accessories
Including Accessories
DisplayPort to DisplayPort Cable
- DisplayPort Male to DisplayPort Male Cable
- Length : 240mm
- 1 pcs.
Support
Download Datasheet
| Datasheet | UPA2015 Datasheet EN |
|
Download Guide
| Guide | UPA2015 Quick Installation Guide |
|
Download Driver
| Driver | ASMUSBHost_V116541WHQL | |
| Version | 1.16.54.1 | |
| Update | 2019-03-08 14:08:31 | |
| Size | 11.4MB | |
| OS |
Windows 7 SP1 32/64 bit
Windows Server 2008 R2 SP1 64bit
|
UPA2015
USB3.2 Gen2 10G & DisplayPort Alt-Mode PCI Express Host Card with Dual USB Type-C Receptacles
- PCI Express Base Specification Revision 3.0 two-lane (x2).
- Expands dual external USB3.2 Gen2 Super-Speed plus Type-C port (DFP) on the system.
- Compliant with Universal Serial Bus 3.2 specification Gen2.
- Compliant with xHCI (eXtensible Host Controller Interface) specifications Revision 1.1.
- Supports simultaneous operation of multiple USB 3.2 Gen2/Gen1, USB 2.0 and USB 1.1 devices
- Supports USB data transfer rate of 10G/5G/480/12/1.5 Mbps.
- Independent 10G USB PHY for each USB Type-C port.
- USB port supplies +5VDC / 1.5A power output to USB device with over current protection.
- Compliant with DisplayPort 1.4 spec with HDTV 4K (2160p) resolution and stereoscopic 3D.
- One USB-C compliant with VESA DisplayPort Alternate Mode for USB Type-C Standard Rev1.0.
- Hot-swapping feature allows connect/disconnect device without powering down the system.
- Driver supports for Microsoft Windows 8.x, 10 and 11 operation systems.
- Certified by Electromagnetic Compatibility (CE, FCC, VCCI, BSMI) and RoHS approval.
Introduction
SUNIX UPA2015 is a Dual-port Super-Speed+ USB3.2 Gen2 10G PCI Express add-on card, and it’s compliant with the PCI Express Gen3 specification for host PC system. Based on USB Type-C pure DFP (Downstream Facing Port) mode, it works up to 10 Gbps for data transfer when connecting to USB 3.2 Gen2 compliant peripherals, while maintaining compatibility with existing USB peripheral devices. USB3.2 Gen2 performance is 2 times faster than USB3.2 Gen1 and 20 times faster than USB2.0 connectivity. In additional, one USB Type-C port supports DisplayPort Alternate-mode for video output, and the other is an USB data-only port
With USB Type-C Receptacle, SUNIX UPA2015 supports reversible plug orientation and cable direction, which means that users will no longer need to be concerned with plug orientation/cable direction, making it easier to plug in. The new connector is smaller and thinner design, but drive higher power output capacity to USB device. SUNIX UPA2015 supports 5VDC@1500mA power output to USB device with over current protection on each USB port. This card is an ideal choice for external storage, smart phone, webcam, video devices, and all other USB electronic devices.
With USB Type-C Receptacle, SUNIX UPA2015 supports reversible plug orientation and cable direction, which means that users will no longer need to be concerned with plug orientation/cable direction, making it easier to plug in. The new connector is smaller and thinner design, but drive higher power output capacity to USB device. SUNIX UPA2015 supports 5VDC@1500mA power output to USB device with over current protection on each USB port. This card is an ideal choice for external storage, smart phone, webcam, video devices, and all other USB electronic devices.
Features
Specifications
Hardware
| BUS | PCI Express Spec 3.0x2, (compliant with x4/x8/x16 slot) | ||
| Controller | PCI Express USB 3.2 Gen2 Host controller, Asmedia ASM3142 | ||
| USB Standard | eXtensible Host Controller Interface (xHCI) Rev1.1 | ||
| IRQ & IO | Assigned by System | ||
USB Communication
| Interface | Universal Serial Bus 3.2 Gen2 / Gen1 / 2.0 / 1.1 |
| Speed | SuperSpeed+(10Gbps), SuperSpeed(5Gbps), High Speed (480Mbps), Full Speed (12Mbps), Low Speed (1.5Mbps) |
| No. of Port | 2-port |
| PCB Connector | USB 3.1 USB Type-C port (Downstream Facing Port) |
| Protection |
±15KV IEC61000-4-2 Air Gap Discharge ±8KV IEC61000-4-2 Contact Discharge |
Video / Audio
| Input Interface | Standard DisplayPort Female, DisplayPort Ver1.4/1.2 |
| Output Interface | USB Type-C port |
| Audio | Yes (audio pass-through) |
Power
| Source | PCI Express Bus Power |
| Output Capacity |
USB Type-C Port: Power Delivery +5VDC / 1.5A / each port Note: Total power output capacity will be limited by system power supply. |
| Over Current Protection |
USB Type-C Port: +5VDC / 1.5A / each port / Power Switch |
| Power Consumption | 3.0W @ 3.3V (board only without power output to USB device) |
Driver Support
| Windows | Windows 8.x / 10 (X86/X64) / 11 (Windows in-box driver) |
Environment
| Operation Temperature | 0 to 60°C (32 to 140°F) |
| Operation Humidity | 5 to 95% RH |
| Storage Temperature | -20 to 70°C (-4 to 158°F) |
Regulatory Approvals
| EMC | CE, FCC, VCCI, BSMI |
| Green | RoHS, CRoHS, WEEE |
Physical Characteristics
| PCB Dimension | 85.30x 55.75 mm |
| Bracket | Standard 120 mm (Low Profile 80mm) |
| Bracket Space | 1 |
Accessories
Including Accessories
DisplayPort to DisplayPort Cable
- DisplayPort Male to DisplayPort Male Cable
- Length : 240mm
- 1 pcs.
Support
Download Datasheet
| Datasheet | UPA2015 Datasheet EN |
|
Download Guide
| Guide | UPA2015 Quick Installation Guide |
|
Download Driver
| Driver | ASMUSBHost_V116541WHQL | |
| Version | 1.16.54.1 | |
| Update | 2019-03-08 14:08:31 | |
| Size | 11.4MB | |
| OS |
Windows 7 SP1 32/64 bit
Windows Server 2008 R2 SP1 64bit
|
UPA2015
USB3.2 Gen2 10G & DisplayPort Alt-Mode PCI Express Host Card with Dual USB Type-C Receptacles
- PCI Express Base Specification Revision 3.0 two-lane (x2).
- Expands dual external USB3.2 Gen2 Super-Speed plus Type-C port (DFP) on the system.
- Compliant with Universal Serial Bus 3.2 specification Gen2.
- Compliant with xHCI (eXtensible Host Controller Interface) specifications Revision 1.1.
- Supports simultaneous operation of multiple USB 3.2 Gen2/Gen1, USB 2.0 and USB 1.1 devices
- Supports USB data transfer rate of 10G/5G/480/12/1.5 Mbps.
- Independent 10G USB PHY for each USB Type-C port.
- USB port supplies +5VDC / 1.5A power output to USB device with over current protection.
- Compliant with DisplayPort 1.4 spec with HDTV 4K (2160p) resolution and stereoscopic 3D.
- One USB-C compliant with VESA DisplayPort Alternate Mode for USB Type-C Standard Rev1.0.
- Hot-swapping feature allows connect/disconnect device without powering down the system.
- Driver supports for Microsoft Windows 8.x, 10 and 11 operation systems.
- Certified by Electromagnetic Compatibility (CE, FCC, VCCI, BSMI) and RoHS approval.
Introduction
SUNIX UPA2015 is a Dual-port Super-Speed+ USB3.2 Gen2 10G PCI Express add-on card, and it’s compliant with the PCI Express Gen3 specification for host PC system. Based on USB Type-C pure DFP (Downstream Facing Port) mode, it works up to 10 Gbps for data transfer when connecting to USB 3.2 Gen2 compliant peripherals, while maintaining compatibility with existing USB peripheral devices. USB3.2 Gen2 performance is 2 times faster than USB3.2 Gen1 and 20 times faster than USB2.0 connectivity. In additional, one USB Type-C port supports DisplayPort Alternate-mode for video output, and the other is an USB data-only port
With USB Type-C Receptacle, SUNIX UPA2015 supports reversible plug orientation and cable direction, which means that users will no longer need to be concerned with plug orientation/cable direction, making it easier to plug in. The new connector is smaller and thinner design, but drive higher power output capacity to USB device. SUNIX UPA2015 supports 5VDC@1500mA power output to USB device with over current protection on each USB port. This card is an ideal choice for external storage, smart phone, webcam, video devices, and all other USB electronic devices.
With USB Type-C Receptacle, SUNIX UPA2015 supports reversible plug orientation and cable direction, which means that users will no longer need to be concerned with plug orientation/cable direction, making it easier to plug in. The new connector is smaller and thinner design, but drive higher power output capacity to USB device. SUNIX UPA2015 supports 5VDC@1500mA power output to USB device with over current protection on each USB port. This card is an ideal choice for external storage, smart phone, webcam, video devices, and all other USB electronic devices.
Features
Specifications
Hardware
| BUS | PCI Express Spec 3.0x2, (compliant with x4/x8/x16 slot) | ||
| Controller | PCI Express USB 3.2 Gen2 Host controller, Asmedia ASM3142 | ||
| USB Standard | eXtensible Host Controller Interface (xHCI) Rev1.1 | ||
| IRQ & IO | Assigned by System | ||
USB Communication
| Interface | Universal Serial Bus 3.2 Gen2 / Gen1 / 2.0 / 1.1 |
| Speed | SuperSpeed+(10Gbps), SuperSpeed(5Gbps), High Speed (480Mbps), Full Speed (12Mbps), Low Speed (1.5Mbps) |
| No. of Port | 2-port |
| PCB Connector | USB 3.1 USB Type-C port (Downstream Facing Port) |
| Protection |
±15KV IEC61000-4-2 Air Gap Discharge ±8KV IEC61000-4-2 Contact Discharge |
Video / Audio
| Input Interface | Standard DisplayPort Female, DisplayPort Ver1.4/1.2 |
| Output Interface | USB Type-C port |
| Audio | Yes (audio pass-through) |
Power
| Source | PCI Express Bus Power |
| Output Capacity |
USB Type-C Port: Power Delivery +5VDC / 1.5A / each port Note: Total power output capacity will be limited by system power supply. |
| Over Current Protection |
USB Type-C Port: +5VDC / 1.5A / each port / Power Switch |
| Power Consumption | 3.0W @ 3.3V (board only without power output to USB device) |
Driver Support
| Windows | Windows 8.x / 10 (X86/X64) / 11 (Windows in-box driver) |
Environment
| Operation Temperature | 0 to 60°C (32 to 140°F) |
| Operation Humidity | 5 to 95% RH |
| Storage Temperature | -20 to 70°C (-4 to 158°F) |
Regulatory Approvals
| EMC | CE, FCC, VCCI, BSMI |
| Green | RoHS, CRoHS, WEEE |
Physical Characteristics
| PCB Dimension | 85.30x 55.75 mm |
| Bracket | Standard 120 mm (Low Profile 80mm) |
| Bracket Space | 1 |
Accessories
Including Accessories
DisplayPort to DisplayPort Cable
- DisplayPort Male to DisplayPort Male Cable
- Length : 240mm
- 1 pcs.
Support
Download Datasheet
| Datasheet | UPA2015 Datasheet EN |
|
Download Guide
| Guide | UPA2015 Quick Installation Guide |
|
Download Driver
| Driver | ASMUSBHost_V116541WHQL | |
| Version | 1.16.54.1 | |
| Update | 2019-03-08 14:08:31 | |
| Size | 11.4MB | |
| OS |
Windows 7 SP1 32/64 bit
Windows Server 2008 R2 SP1 64bit
|
UPA2015
USB3.2 Gen2 10G & DisplayPort Alt-Mode PCI Express Host Card with Dual USB Type-C Receptacles
- PCI Express Base Specification Revision 3.0 two-lane (x2).
- Expands dual external USB3.2 Gen2 Super-Speed plus Type-C port (DFP) on the system.
- Compliant with Universal Serial Bus 3.2 specification Gen2.
- Compliant with xHCI (eXtensible Host Controller Interface) specifications Revision 1.1.
- Supports simultaneous operation of multiple USB 3.2 Gen2/Gen1, USB 2.0 and USB 1.1 devices
- Supports USB data transfer rate of 10G/5G/480/12/1.5 Mbps.
- Independent 10G USB PHY for each USB Type-C port.
- USB port supplies +5VDC / 1.5A power output to USB device with over current protection.
- Compliant with DisplayPort 1.4 spec with HDTV 4K (2160p) resolution and stereoscopic 3D.
- One USB-C compliant with VESA DisplayPort Alternate Mode for USB Type-C Standard Rev1.0.
- Hot-swapping feature allows connect/disconnect device without powering down the system.
- Driver supports for Microsoft Windows 8.x, 10 and 11 operation systems.
- Certified by Electromagnetic Compatibility (CE, FCC, VCCI, BSMI) and RoHS approval.
SUNIX UPA2015 is a Dual-port Super-Speed+ USB3.2 Gen2 10G PCI Express add-on card, and it’s compliant with the PCI Express Gen3 specification for host PC system. Based on USB Type-C pure DFP (Downstream Facing Port) mode, it works up to 10 Gbps for data transfer when connecting to USB 3.2 Gen2 compliant peripherals, while maintaining compatibility with existing USB peripheral devices. USB3.2 Gen2 performance is 2 times faster than USB3.2 Gen1 and 20 times faster than USB2.0 connectivity. In additional, one USB Type-C port supports DisplayPort Alternate-mode for video output, and the other is an USB data-only port
With USB Type-C Receptacle, SUNIX UPA2015 supports reversible plug orientation and cable direction, which means that users will no longer need to be concerned with plug orientation/cable direction, making it easier to plug in. The new connector is smaller and thinner design, but drive higher power output capacity to USB device. SUNIX UPA2015 supports 5VDC@1500mA power output to USB device with over current protection on each USB port. This card is an ideal choice for external storage, smart phone, webcam, video devices, and all other USB electronic devices.
With USB Type-C Receptacle, SUNIX UPA2015 supports reversible plug orientation and cable direction, which means that users will no longer need to be concerned with plug orientation/cable direction, making it easier to plug in. The new connector is smaller and thinner design, but drive higher power output capacity to USB device. SUNIX UPA2015 supports 5VDC@1500mA power output to USB device with over current protection on each USB port. This card is an ideal choice for external storage, smart phone, webcam, video devices, and all other USB electronic devices.
Introduction
SUNIX UPA2015 is a Dual-port Super-Speed+ USB3.2 Gen2 10G PCI Express add-on card, and it’s compliant with the PCI Express Gen3 specification for host PC system. Based on USB Type-C pure DFP (Downstream Facing Port) mode, it works up to 10 Gbps for data transfer when connecting to USB 3.2 Gen2 compliant peripherals, while maintaining compatibility with existing USB peripheral devices. USB3.2 Gen2 performance is 2 times faster than USB3.2 Gen1 and 20 times faster than USB2.0 connectivity. In additional, one USB Type-C port supports DisplayPort Alternate-mode for video output, and the other is an USB data-only port
With USB Type-C Receptacle, SUNIX UPA2015 supports reversible plug orientation and cable direction, which means that users will no longer need to be concerned with plug orientation/cable direction, making it easier to plug in. The new connector is smaller and thinner design, but drive higher power output capacity to USB device. SUNIX UPA2015 supports 5VDC@1500mA power output to USB device with over current protection on each USB port. This card is an ideal choice for external storage, smart phone, webcam, video devices, and all other USB electronic devices.
With USB Type-C Receptacle, SUNIX UPA2015 supports reversible plug orientation and cable direction, which means that users will no longer need to be concerned with plug orientation/cable direction, making it easier to plug in. The new connector is smaller and thinner design, but drive higher power output capacity to USB device. SUNIX UPA2015 supports 5VDC@1500mA power output to USB device with over current protection on each USB port. This card is an ideal choice for external storage, smart phone, webcam, video devices, and all other USB electronic devices.
Features
Specifications
Hardware
| BUS | PCI Express Spec 3.0x2, (compliant with x4/x8/x16 slot) | ||
| Controller | PCI Express USB 3.2 Gen2 Host controller, Asmedia ASM3142 | ||
| USB Standard | eXtensible Host Controller Interface (xHCI) Rev1.1 | ||
| IRQ & IO | Assigned by System | ||
USB Communication
| Interface | Universal Serial Bus 3.2 Gen2 / Gen1 / 2.0 / 1.1 |
| Speed | SuperSpeed+(10Gbps), SuperSpeed(5Gbps), High Speed (480Mbps), Full Speed (12Mbps), Low Speed (1.5Mbps) |
| No. of Port | 2-port |
| PCB Connector | USB 3.1 USB Type-C port (Downstream Facing Port) |
| Protection |
±15KV IEC61000-4-2 Air Gap Discharge ±8KV IEC61000-4-2 Contact Discharge |
Video / Audio
| Input Interface | Standard DisplayPort Female, DisplayPort Ver1.4/1.2 |
| Output Interface | USB Type-C port |
| Audio | Yes (audio pass-through) |
Power
| Source | PCI Express Bus Power |
| Output Capacity |
USB Type-C Port: Power Delivery +5VDC / 1.5A / each port Note: Total power output capacity will be limited by system power supply. |
| Over Current Protection |
USB Type-C Port: +5VDC / 1.5A / each port / Power Switch |
| Power Consumption | 3.0W @ 3.3V (board only without power output to USB device) |
Driver Support
| Windows | Windows 8.x / 10 (X86/X64) / 11 (Windows in-box driver) |
Environment
| Operation Temperature | 0 to 60°C (32 to 140°F) |
| Operation Humidity | 5 to 95% RH |
| Storage Temperature | -20 to 70°C (-4 to 158°F) |
Regulatory Approvals
| EMC | CE, FCC, VCCI, BSMI |
| Green | RoHS, CRoHS, WEEE |
Physical Characteristics
| PCB Dimension | 85.30x 55.75 mm |
| Bracket | Standard 120 mm (Low Profile 80mm) |
| Bracket Space | 1 |
Accessories
Including Accessories
DisplayPort to DisplayPort Cable
- DisplayPort Male to DisplayPort Male Cable
- Length : 240mm
- 1 pcs.
Support
Download Datasheet
| Datasheet | UPA2015 Datasheet EN |
|
Download Guide
| Guide | UPA2015 Quick Installation Guide |
|
Download Driver
| Driver | ASMUSBHost_V116541WHQL | |
| Version | 1.16.54.1 | |
| Update | 2019-03-08 14:08:31 | |
| Size | 11.4MB | |
| OS |
Windows 7 SP1 32/64 bit
Windows Server 2008 R2 SP1 64bit
|
