CAN2F00SI (phased out) (Replacement: CAN-E2102SI)
PCIe to 2-port Isolated CAN FD
Communication Card
Features:
- Designed to meet PCI Express Base Specification Revision 2.1.
- Equipped with high reliable SUNIX QiuNiu controller.
- Complies with CAN specifications 2.0B and FD
- CAN FD bit rates for the data field up to 8 Mbit/s
- Isolation on the each CAN channel up to 2.5KV
- Surge protection up to 2KV
- Plug-n-Play, I/O address and IRQ assigned by system.
- Support Windows and Linux SocketCAN drivers
Introduction
SUNIX CAN2F00SI, industrial PCIe to 2-port isolated high speed CAN FD communication card, is designed for Edge Computer that enables CAN FD and CAN bus data communication capability for electric vehicle industry application. This board not only built-in SUNIX CAN FD controller, QiuNiu, but also built with many of SUNIX advanced features and technologies. In addition, SUNIX provides Windows and SocketCAN drivers, allowing users to use this card on Windows and Linux operating systems. SUNIX CAN2F00SI card enriches CAN 2.0/ CAN FD interface expandable capacity; it is the best CAN bus communication solution for electric vehicle and AVG/AMR applications.
Specifications
Board Communication
| Interface | PCI Express |
| Controller | SUNIX QiuNiu Controller |
| BUS | PCI Express Gen2 x 1 (single lane) |
| IRQ & IO | Assigned by System |
| ESD Protection |
±15KV IEC61000-4-2 Air Gap Discharge ±8KV IEC61000-4-2 Contact Discharge |
CAN Communication
| Type | CAN 2.0 / CAN FD |
| Channel | 2-channel |
| Arbitration bit rate | 1 Mbit/s |
| Isolation | 2500 VDC |
| Pin Define | CAN H, CAN L, GND |
| Data bit rate | 8 Mbit/s |
| Termination | 120Ω Configured by Software |
| PCB Connector | DB44 Female |
Software Support
| Microsoft |
Windows 10 (32/64bit) / 11 (64bit) |
|
Linux SocketCAN |
Linux Kernel 5.x / 6.x |
Regulatory Approvals
| Hardware |
CE / FCC / VCCI / BSMI |
Declaration
| Green Product |
RoHS, WEEE |
Environment
| Operation Temperature |
-20 to 70°C (-4 to 158°F) |
|
Operation Humidity |
5 to 95% (non-condensing) |
|
Storage Temperature |
-20 to 85°C (-4 to 185°F) |
Dimension
| PCB Dimension |
110 x 68.5 mm |
|
Bracket |
Full Height 120 mm / Low Profile 79.2mm |
|
Bracket Space |
1 |
Accessories
Including Accessories
DB44 to 2-port DB9 Male Connection Cable
- 40 cm
- Part Number: 1WDB-44M04009D2000
- 1 pcs
Brackets Standard & Low Profile
- Standard 121 mm & Low Profile 79.2mm
- Bracket Space: 1
Support
Download Manual
| Manual | CAN FD Series User Manual |
|
| Version | Ver. 1.1 | |
| Update | 2024-01-22 11:21:15 | |
| Size | 1.9MB |
Download Datasheet
| Datasheet | CAN2F00SI Datasheet EN |
|
Download Guide
| Guide | Industrial CANFD Control Card QIG (Universal) |
|
CAN2F00SI (phased out) (Replacement: CAN-E2102SI)
PCIe to 2-port Isolated CAN FD
Communication Card
Features:
- Designed to meet PCI Express Base Specification Revision 2.1.
- Equipped with high reliable SUNIX QiuNiu controller.
- Complies with CAN specifications 2.0B and FD
- CAN FD bit rates for the data field up to 8 Mbit/s
- Isolation on the each CAN channel up to 2.5KV
- Surge protection up to 2KV
- Plug-n-Play, I/O address and IRQ assigned by system.
- Support Windows and Linux SocketCAN drivers
Introduction
SUNIX CAN2F00SI, industrial PCIe to 2-port isolated high speed CAN FD communication card, is designed for Edge Computer that enables CAN FD and CAN bus data communication capability for electric vehicle industry application. This board not only built-in SUNIX CAN FD controller, QiuNiu, but also built with many of SUNIX advanced features and technologies. In addition, SUNIX provides Windows and SocketCAN drivers, allowing users to use this card on Windows and Linux operating systems. SUNIX CAN2F00SI card enriches CAN 2.0/ CAN FD interface expandable capacity; it is the best CAN bus communication solution for electric vehicle and AVG/AMR applications.
Specifications
Board Communication
| Interface | PCI Express |
| Controller | SUNIX QiuNiu Controller |
| BUS | PCI Express Gen2 x 1 (single lane) |
| IRQ & IO | Assigned by System |
| ESD Protection |
±15KV IEC61000-4-2 Air Gap Discharge ±8KV IEC61000-4-2 Contact Discharge |
CAN Communication
| Type | CAN 2.0 / CAN FD |
| Channel | 2-channel |
| Arbitration bit rate | 1 Mbit/s |
| Isolation | 2500 VDC |
| Pin Define | CAN H, CAN L, GND |
| Data bit rate | 8 Mbit/s |
| Termination | 120Ω Configured by Software |
| PCB Connector | DB44 Female |
Software Support
| Microsoft |
Windows 10 (32/64bit) / 11 (64bit) |
|
Linux SocketCAN |
Linux Kernel 5.x / 6.x |
Regulatory Approvals
| Hardware |
CE / FCC / VCCI / BSMI |
Declaration
| Green Product |
RoHS, WEEE |
Environment
| Operation Temperature |
-20 to 70°C (-4 to 158°F) |
|
Operation Humidity |
5 to 95% (non-condensing) |
|
Storage Temperature |
-20 to 85°C (-4 to 185°F) |
Dimension
| PCB Dimension |
110 x 68.5 mm |
|
Bracket |
Full Height 120 mm / Low Profile 79.2mm |
|
Bracket Space |
1 |
Accessories
Including Accessories
DB44 to 2-port DB9 Male Connection Cable
- 40 cm
- Part Number: 1WDB-44M04009D2000
- 1 pcs
Brackets Standard & Low Profile
- Standard 121 mm & Low Profile 79.2mm
- Bracket Space: 1
Support
Download Manual
| Manual | CAN FD Series User Manual |
|
| Version | Ver. 1.1 | |
| Update | 2024-01-22 11:21:15 | |
| Size | 1.9MB |
Download Datasheet
| Datasheet | CAN2F00SI Datasheet EN |
|
Download Guide
| Guide | Industrial CANFD Control Card QIG (Universal) |
|
CAN2F00SI (phased out) (Replacement: CAN-E2102SI)
PCIe to 2-port Isolated CAN FD
Communication Card
Features:
- Designed to meet PCI Express Base Specification Revision 2.1.
- Equipped with high reliable SUNIX QiuNiu controller.
- Complies with CAN specifications 2.0B and FD
- CAN FD bit rates for the data field up to 8 Mbit/s
- Isolation on the each CAN channel up to 2.5KV
- Surge protection up to 2KV
- Plug-n-Play, I/O address and IRQ assigned by system.
- Support Windows and Linux SocketCAN drivers
Introduction
SUNIX CAN2F00SI, industrial PCIe to 2-port isolated high speed CAN FD communication card, is designed for Edge Computer that enables CAN FD and CAN bus data communication capability for electric vehicle industry application. This board not only built-in SUNIX CAN FD controller, QiuNiu, but also built with many of SUNIX advanced features and technologies. In addition, SUNIX provides Windows and SocketCAN drivers, allowing users to use this card on Windows and Linux operating systems. SUNIX CAN2F00SI card enriches CAN 2.0/ CAN FD interface expandable capacity; it is the best CAN bus communication solution for electric vehicle and AVG/AMR applications.
Specifications
Board Communication
| Interface | PCI Express |
| Controller | SUNIX QiuNiu Controller |
| BUS | PCI Express Gen2 x 1 (single lane) |
| IRQ & IO | Assigned by System |
| ESD Protection |
±15KV IEC61000-4-2 Air Gap Discharge ±8KV IEC61000-4-2 Contact Discharge |
CAN Communication
| Type | CAN 2.0 / CAN FD |
| Channel | 2-channel |
| Arbitration bit rate | 1 Mbit/s |
| Isolation | 2500 VDC |
| Pin Define | CAN H, CAN L, GND |
| Data bit rate | 8 Mbit/s |
| Termination | 120Ω Configured by Software |
| PCB Connector | DB44 Female |
Software Support
| Microsoft |
Windows 10 (32/64bit) / 11 (64bit) |
|
Linux SocketCAN |
Linux Kernel 5.x / 6.x |
Regulatory Approvals
| Hardware |
CE / FCC / VCCI / BSMI |
Declaration
| Green Product |
RoHS, WEEE |
Environment
| Operation Temperature |
-20 to 70°C (-4 to 158°F) |
|
Operation Humidity |
5 to 95% (non-condensing) |
|
Storage Temperature |
-20 to 85°C (-4 to 185°F) |
Dimension
| PCB Dimension |
110 x 68.5 mm |
|
Bracket |
Full Height 120 mm / Low Profile 79.2mm |
|
Bracket Space |
1 |
Accessories
Including Accessories
DB44 to 2-port DB9 Male Connection Cable
- 40 cm
- Part Number: 1WDB-44M04009D2000
- 1 pcs
Brackets Standard & Low Profile
- Standard 121 mm & Low Profile 79.2mm
- Bracket Space: 1
Support
Download Manual
| Manual | CAN FD Series User Manual |
|
| Version | Ver. 1.1 | |
| Update | 2024-01-22 11:21:15 | |
| Size | 1.9MB |
Download Datasheet
| Datasheet | CAN2F00SI Datasheet EN |
|
Download Guide
| Guide | Industrial CANFD Control Card QIG (Universal) |
|
CAN2F00SI (phased out) (Replacement: CAN-E2102SI)
PCIe to 2-port Isolated CAN FD
Communication Card
Features:
- Designed to meet PCI Express Base Specification Revision 2.1.
- Equipped with high reliable SUNIX QiuNiu controller.
- Complies with CAN specifications 2.0B and FD
- CAN FD bit rates for the data field up to 8 Mbit/s
- Isolation on the each CAN channel up to 2.5KV
- Surge protection up to 2KV
- Plug-n-Play, I/O address and IRQ assigned by system.
- Support Windows and Linux SocketCAN drivers
SUNIX CAN2F00SI, industrial PCIe to 2-port isolated high speed CAN FD communication card, is designed for Edge Computer that enables CAN FD and CAN bus data communication capability for electric vehicle industry application. This board not only built-in SUNIX CAN FD controller, QiuNiu, but also built with many of SUNIX advanced features and technologies. In addition, SUNIX provides Windows and SocketCAN drivers, allowing users to use this card on Windows and Linux operating systems. SUNIX CAN2F00SI card enriches CAN 2.0/ CAN FD interface expandable capacity; it is the best CAN bus communication solution for electric vehicle and AVG/AMR applications.
Introduction
SUNIX CAN2F00SI, industrial PCIe to 2-port isolated high speed CAN FD communication card, is designed for Edge Computer that enables CAN FD and CAN bus data communication capability for electric vehicle industry application. This board not only built-in SUNIX CAN FD controller, QiuNiu, but also built with many of SUNIX advanced features and technologies. In addition, SUNIX provides Windows and SocketCAN drivers, allowing users to use this card on Windows and Linux operating systems. SUNIX CAN2F00SI card enriches CAN 2.0/ CAN FD interface expandable capacity; it is the best CAN bus communication solution for electric vehicle and AVG/AMR applications.
Specifications
Board Communication
| Interface | PCI Express |
| Controller | SUNIX QiuNiu Controller |
| BUS | PCI Express Gen2 x 1 (single lane) |
| IRQ & IO | Assigned by System |
| ESD Protection |
±15KV IEC61000-4-2 Air Gap Discharge ±8KV IEC61000-4-2 Contact Discharge |
CAN Communication
| Type | CAN 2.0 / CAN FD |
| Channel | 2-channel |
| Arbitration bit rate | 1 Mbit/s |
| Isolation | 2500 VDC |
| Pin Define | CAN H, CAN L, GND |
| Data bit rate | 8 Mbit/s |
| Termination | 120Ω Configured by Software |
| PCB Connector | DB44 Female |
Software Support
| Microsoft |
Windows 10 (32/64bit) / 11 (64bit) |
|
Linux SocketCAN |
Linux Kernel 5.x / 6.x |
Regulatory Approvals
| Hardware |
CE / FCC / VCCI / BSMI |
Declaration
| Green Product |
RoHS, WEEE |
Environment
| Operation Temperature |
-20 to 70°C (-4 to 158°F) |
|
Operation Humidity |
5 to 95% (non-condensing) |
|
Storage Temperature |
-20 to 85°C (-4 to 185°F) |
Dimension
| PCB Dimension |
110 x 68.5 mm |
|
Bracket |
Full Height 120 mm / Low Profile 79.2mm |
|
Bracket Space |
1 |
Accessories
Including Accessories
DB44 to 2-port DB9 Male Connection Cable
- 40 cm
- Part Number: 1WDB-44M04009D2000
- 1 pcs
Brackets Standard & Low Profile
- Standard 121 mm & Low Profile 79.2mm
- Bracket Space: 1
Support
Download Manual
| Manual | CAN FD Series User Manual |
|
| Version | Ver. 1.1 | |
| Update | 2024-01-22 11:21:15 | |
| Size | 1.9MB |
Download Datasheet
| Datasheet | CAN2F00SI Datasheet EN |
|
Download Guide
| Guide | Industrial CANFD Control Card QIG (Universal) |
|
