USB2311C (phased out)

USB 3.1 Enhanced SuperSpeed Single port PCI Express Host Card with Type-C Receptacle
  • PCI Express Base Specification Revision 3.0 single-lane ( x1).
  • Compliant with Universal Serial Bus 3.1 specification Gen2.
  • Compliant with xHCI (eXtensible Host Controller Interface) specifications Revision 1.1.
  • Supports simultaneous operation of multiple USB 3.1, 3.0, USB 2.0 and USB 1.1 devices.
  • Supports USB data transfer rate of 10G/5G/480/12/1.5 Mbps.
  • Expands single external USB 3.1 Super-Speed plus Type-C port (DFP) on the system.
  • USB port supplies maximum +5VDC / 3000mA power output to USB device.
  • Built-in over current protection on each USB port.
  • Support device remote wakeup function from USB keyboard or mouse.
  • Hot-swapping feature allows connect/disconnect device without powering down the system.
  • Driver supports for Microsoft Windows 7, 8.x and 10 operation systems.
  • Certified by Electromagnetic Compatibility (CE, FCC, VCCI, BSMI) and RoHS approval.

Introduction

Super-Speed plus USB 3.1 Type-C is the next revolution in I/O interconnect standards that will deliver the bandwidth and features required by PCs, consumer electronics and portable devices. With better performance, small form factor, high power capacity feature, Super-Speed plus USB 3.1 Type-C interface will be the trendy of IT technology. 

SUNIX USB2311C is a single-port Super-Speed USB 3.1 PCI Express card, and it’s compliant with the PCI Express Generation 3 specification for host PC system. Based on USB Type-C pure DFP (Downstream Facing Port) mode, it works up to 10 Gbps for data transfer when connecting to USB 3.1 compliant peripherals, while maintaining compatibility with existing USB peripheral devices. USB 3.1 performance is 2 times faster than USB 3.0 and 20 times faster than USB 2.0 connectivity.
 
With USB Type-C Receptacle, SUNIX USB2311C sports reversible plug orientation and cable direction, which means that users will no longer need to be concerned with plug orientation/cable direction, making it easier to plug in. The new connector is smaller and thinner design, but drive higher power output capacity to USB device. SUNIX USB2311C supports 5VDC@3000mA power output to USB device with over current protection on each USB port. This card is an ideal choice for external storage devices, digital cameras, webcam, video devices, and all other USB electronic devices.
 

Features








Specifications

Hardware

BUS PCI Express Spec 3.0, Single-Lane (x1)
Controller PCI Express USB 3.1 Host controller, Asmedia ASM1142
USB Standard eXtensible Host Controller Interface (xHCI) Rev1.1
IRQ & IO Assigned by System

USB Communication

Interface Universal Serial Bus 3.1 / 3.0 / 2.0 / 1.1
Speed SuperSpeed+(10Gbps), SuperSpeed(5Gbps), High Speed (480Mbps), Full Speed (12Mbps), Low Speed (1.5Mbps)
No. of Port 1-port
PCB Connector USB 3.1 USB Type-C port (Downstream Facing Port)
Protection ±15KV IEC61000-4-2 Air Gap Discharge
±8KV IEC61000-4-2 Contact Discharge

Power

Source +5VDC / SATA Power Connector Type
Output Capacity USB Type-C Port: +5VDC / Maximum 3.0A / each port
Note: Total power output capacity will be limited by system power supply.
Over Current Protection USB Type-C Port: +5VDC / Maximum 3.7A / each port
Power Consumption 1.1 W @ 3.3V (board only without power output to USB device)

Driver Support

Windows Windows 7 (X86/X64)
Windows 8.x / 10 (X86/X64) (Windows in-box driver)
Linux Linux 2.6.31 or later (Linux OS already implemented USB 3.0 driver)

Environment

Operation Temperature 0 to 60°C (32 to 140°F)
Operation Humidity 5 to 95% RH
Storage Temperature -20 to 70°C (-4 to 158°F)

Regulatory Approvals

EMC CE, FCC, VCCI, BSMI
Green RoHS, CRoHS, WEEE

Physical Characteristics

PCB Dimension 65.7 x 68.5 mm
Bracket Standard 120 mm (Low Profile 80mm)
Bracket Space 1

Support

Download Manual

Manual USB2311C Quick Installation Guide
Version V1.0
Update 2016-05-24 14:22:35
Size 1.7MB

Download Datasheet

Datasheet USB2311C Datasheet

Download Driver

Driver USB3.1 Windows Inbox Driver
OS
Windows 11 64bit
Windows 10 32/64 bit
Windows 8.1 32/64 bit
Windows 8.0 32/64 bit
Windows Server 2022 64bit
Windows Server 2019 64bit
Windows Server 2016 64bit
Windows Server 2012 R2 64-bit
Windows Server 2012 64bit
Driver ASMUSBHost_V116541WHQL
Version 1.16.54.1
Update 2019-03-08 14:08:31
Size 11.4MB
OS
Windows 7 SP1 32/64 bit
Windows Server 2008 R2 SP1 64bit
Driver USB3.1 Linux Inbox Driver
OS
Linux 4.6 above

USB2311C (phased out)

USB 3.1 Enhanced SuperSpeed Single port PCI Express Host Card with Type-C Receptacle
  • PCI Express Base Specification Revision 3.0 single-lane ( x1).
  • Compliant with Universal Serial Bus 3.1 specification Gen2.
  • Compliant with xHCI (eXtensible Host Controller Interface) specifications Revision 1.1.
  • Supports simultaneous operation of multiple USB 3.1, 3.0, USB 2.0 and USB 1.1 devices.
  • Supports USB data transfer rate of 10G/5G/480/12/1.5 Mbps.
  • Expands single external USB 3.1 Super-Speed plus Type-C port (DFP) on the system.
  • USB port supplies maximum +5VDC / 3000mA power output to USB device.
  • Built-in over current protection on each USB port.
  • Support device remote wakeup function from USB keyboard or mouse.
  • Hot-swapping feature allows connect/disconnect device without powering down the system.
  • Driver supports for Microsoft Windows 7, 8.x and 10 operation systems.
  • Certified by Electromagnetic Compatibility (CE, FCC, VCCI, BSMI) and RoHS approval.

Introduction

Super-Speed plus USB 3.1 Type-C is the next revolution in I/O interconnect standards that will deliver the bandwidth and features required by PCs, consumer electronics and portable devices. With better performance, small form factor, high power capacity feature, Super-Speed plus USB 3.1 Type-C interface will be the trendy of IT technology. 

SUNIX USB2311C is a single-port Super-Speed USB 3.1 PCI Express card, and it’s compliant with the PCI Express Generation 3 specification for host PC system. Based on USB Type-C pure DFP (Downstream Facing Port) mode, it works up to 10 Gbps for data transfer when connecting to USB 3.1 compliant peripherals, while maintaining compatibility with existing USB peripheral devices. USB 3.1 performance is 2 times faster than USB 3.0 and 20 times faster than USB 2.0 connectivity.
 
With USB Type-C Receptacle, SUNIX USB2311C sports reversible plug orientation and cable direction, which means that users will no longer need to be concerned with plug orientation/cable direction, making it easier to plug in. The new connector is smaller and thinner design, but drive higher power output capacity to USB device. SUNIX USB2311C supports 5VDC@3000mA power output to USB device with over current protection on each USB port. This card is an ideal choice for external storage devices, digital cameras, webcam, video devices, and all other USB electronic devices.
 

Features








Specifications

Hardware

BUS PCI Express Spec 3.0, Single-Lane (x1)
Controller PCI Express USB 3.1 Host controller, Asmedia ASM1142
USB Standard eXtensible Host Controller Interface (xHCI) Rev1.1
IRQ & IO Assigned by System

USB Communication

Interface Universal Serial Bus 3.1 / 3.0 / 2.0 / 1.1
Speed SuperSpeed+(10Gbps), SuperSpeed(5Gbps), High Speed (480Mbps), Full Speed (12Mbps), Low Speed (1.5Mbps)
No. of Port 1-port
PCB Connector USB 3.1 USB Type-C port (Downstream Facing Port)
Protection ±15KV IEC61000-4-2 Air Gap Discharge
±8KV IEC61000-4-2 Contact Discharge

Power

Source +5VDC / SATA Power Connector Type
Output Capacity USB Type-C Port: +5VDC / Maximum 3.0A / each port
Note: Total power output capacity will be limited by system power supply.
Over Current Protection USB Type-C Port: +5VDC / Maximum 3.7A / each port
Power Consumption 1.1 W @ 3.3V (board only without power output to USB device)

Driver Support

Windows Windows 7 (X86/X64)
Windows 8.x / 10 (X86/X64) (Windows in-box driver)
Linux Linux 2.6.31 or later (Linux OS already implemented USB 3.0 driver)

Environment

Operation Temperature 0 to 60°C (32 to 140°F)
Operation Humidity 5 to 95% RH
Storage Temperature -20 to 70°C (-4 to 158°F)

Regulatory Approvals

EMC CE, FCC, VCCI, BSMI
Green RoHS, CRoHS, WEEE

Physical Characteristics

PCB Dimension 65.7 x 68.5 mm
Bracket Standard 120 mm (Low Profile 80mm)
Bracket Space 1

Support

Download Manual

Manual USB2311C Quick Installation Guide
Version V1.0
Update 2016-05-24 14:22:35
Size 1.7MB

Download Datasheet

Datasheet USB2311C Datasheet

Download Driver

Driver USB3.1 Windows Inbox Driver
OS
Windows 11 64bit
Windows 10 32/64 bit
Windows 8.1 32/64 bit
Windows 8.0 32/64 bit
Windows Server 2022 64bit
Windows Server 2019 64bit
Windows Server 2016 64bit
Windows Server 2012 R2 64-bit
Windows Server 2012 64bit
Driver ASMUSBHost_V116541WHQL
Version 1.16.54.1
Update 2019-03-08 14:08:31
Size 11.4MB
OS
Windows 7 SP1 32/64 bit
Windows Server 2008 R2 SP1 64bit
Driver USB3.1 Linux Inbox Driver
OS
Linux 4.6 above

USB2311C (phased out)

USB 3.1 Enhanced SuperSpeed Single port PCI Express Host Card with Type-C Receptacle
  • PCI Express Base Specification Revision 3.0 single-lane ( x1).
  • Compliant with Universal Serial Bus 3.1 specification Gen2.
  • Compliant with xHCI (eXtensible Host Controller Interface) specifications Revision 1.1.
  • Supports simultaneous operation of multiple USB 3.1, 3.0, USB 2.0 and USB 1.1 devices.
  • Supports USB data transfer rate of 10G/5G/480/12/1.5 Mbps.
  • Expands single external USB 3.1 Super-Speed plus Type-C port (DFP) on the system.
  • USB port supplies maximum +5VDC / 3000mA power output to USB device.
  • Built-in over current protection on each USB port.
  • Support device remote wakeup function from USB keyboard or mouse.
  • Hot-swapping feature allows connect/disconnect device without powering down the system.
  • Driver supports for Microsoft Windows 7, 8.x and 10 operation systems.
  • Certified by Electromagnetic Compatibility (CE, FCC, VCCI, BSMI) and RoHS approval.

Introduction

Super-Speed plus USB 3.1 Type-C is the next revolution in I/O interconnect standards that will deliver the bandwidth and features required by PCs, consumer electronics and portable devices. With better performance, small form factor, high power capacity feature, Super-Speed plus USB 3.1 Type-C interface will be the trendy of IT technology. 

SUNIX USB2311C is a single-port Super-Speed USB 3.1 PCI Express card, and it’s compliant with the PCI Express Generation 3 specification for host PC system. Based on USB Type-C pure DFP (Downstream Facing Port) mode, it works up to 10 Gbps for data transfer when connecting to USB 3.1 compliant peripherals, while maintaining compatibility with existing USB peripheral devices. USB 3.1 performance is 2 times faster than USB 3.0 and 20 times faster than USB 2.0 connectivity.
 
With USB Type-C Receptacle, SUNIX USB2311C sports reversible plug orientation and cable direction, which means that users will no longer need to be concerned with plug orientation/cable direction, making it easier to plug in. The new connector is smaller and thinner design, but drive higher power output capacity to USB device. SUNIX USB2311C supports 5VDC@3000mA power output to USB device with over current protection on each USB port. This card is an ideal choice for external storage devices, digital cameras, webcam, video devices, and all other USB electronic devices.
 

Features








Specifications

Hardware

BUS PCI Express Spec 3.0, Single-Lane (x1)
Controller PCI Express USB 3.1 Host controller, Asmedia ASM1142
USB Standard eXtensible Host Controller Interface (xHCI) Rev1.1
IRQ & IO Assigned by System

USB Communication

Interface Universal Serial Bus 3.1 / 3.0 / 2.0 / 1.1
Speed SuperSpeed+(10Gbps), SuperSpeed(5Gbps), High Speed (480Mbps), Full Speed (12Mbps), Low Speed (1.5Mbps)
No. of Port 1-port
PCB Connector USB 3.1 USB Type-C port (Downstream Facing Port)
Protection ±15KV IEC61000-4-2 Air Gap Discharge
±8KV IEC61000-4-2 Contact Discharge

Power

Source +5VDC / SATA Power Connector Type
Output Capacity USB Type-C Port: +5VDC / Maximum 3.0A / each port
Note: Total power output capacity will be limited by system power supply.
Over Current Protection USB Type-C Port: +5VDC / Maximum 3.7A / each port
Power Consumption 1.1 W @ 3.3V (board only without power output to USB device)

Driver Support

Windows Windows 7 (X86/X64)
Windows 8.x / 10 (X86/X64) (Windows in-box driver)
Linux Linux 2.6.31 or later (Linux OS already implemented USB 3.0 driver)

Environment

Operation Temperature 0 to 60°C (32 to 140°F)
Operation Humidity 5 to 95% RH
Storage Temperature -20 to 70°C (-4 to 158°F)

Regulatory Approvals

EMC CE, FCC, VCCI, BSMI
Green RoHS, CRoHS, WEEE

Physical Characteristics

PCB Dimension 65.7 x 68.5 mm
Bracket Standard 120 mm (Low Profile 80mm)
Bracket Space 1

Support

Download Manual

Manual USB2311C Quick Installation Guide
Version V1.0
Update 2016-05-24 14:22:35
Size 1.7MB

Download Datasheet

Datasheet USB2311C Datasheet

Download Driver

Driver USB3.1 Windows Inbox Driver
OS
Windows 11 64bit
Windows 10 32/64 bit
Windows 8.1 32/64 bit
Windows 8.0 32/64 bit
Windows Server 2022 64bit
Windows Server 2019 64bit
Windows Server 2016 64bit
Windows Server 2012 R2 64-bit
Windows Server 2012 64bit
Driver ASMUSBHost_V116541WHQL
Version 1.16.54.1
Update 2019-03-08 14:08:31
Size 11.4MB
OS
Windows 7 SP1 32/64 bit
Windows Server 2008 R2 SP1 64bit
Driver USB3.1 Linux Inbox Driver
OS
Linux 4.6 above

USB2311C (phased out)

USB 3.1 Enhanced SuperSpeed Single port PCI Express Host Card with Type-C Receptacle
  • PCI Express Base Specification Revision 3.0 single-lane ( x1).
  • Compliant with Universal Serial Bus 3.1 specification Gen2.
  • Compliant with xHCI (eXtensible Host Controller Interface) specifications Revision 1.1.
  • Supports simultaneous operation of multiple USB 3.1, 3.0, USB 2.0 and USB 1.1 devices.
  • Supports USB data transfer rate of 10G/5G/480/12/1.5 Mbps.
  • Expands single external USB 3.1 Super-Speed plus Type-C port (DFP) on the system.
  • USB port supplies maximum +5VDC / 3000mA power output to USB device.
  • Built-in over current protection on each USB port.
  • Support device remote wakeup function from USB keyboard or mouse.
  • Hot-swapping feature allows connect/disconnect device without powering down the system.
  • Driver supports for Microsoft Windows 7, 8.x and 10 operation systems.
  • Certified by Electromagnetic Compatibility (CE, FCC, VCCI, BSMI) and RoHS approval.
Super-Speed plus USB 3.1 Type-C is the next revolution in I/O interconnect standards that will deliver the bandwidth and features required by PCs, consumer electronics and portable devices. With better performance, small form factor, high power capacity feature, Super-Speed plus USB 3.1 Type-C interface will be the trendy of IT technology. 

SUNIX USB2311C is a single-port Super-Speed USB 3.1 PCI Express card, and it’s compliant with the PCI Express Generation 3 specification for host PC system. Based on USB Type-C pure DFP (Downstream Facing Port) mode, it works up to 10 Gbps for data transfer when connecting to USB 3.1 compliant peripherals, while maintaining compatibility with existing USB peripheral devices. USB 3.1 performance is 2 times faster than USB 3.0 and 20 times faster than USB 2.0 connectivity.
 
With USB Type-C Receptacle, SUNIX USB2311C sports reversible plug orientation and cable direction, which means that users will no longer need to be concerned with plug orientation/cable direction, making it easier to plug in. The new connector is smaller and thinner design, but drive higher power output capacity to USB device. SUNIX USB2311C supports 5VDC@3000mA power output to USB device with over current protection on each USB port. This card is an ideal choice for external storage devices, digital cameras, webcam, video devices, and all other USB electronic devices.
 

Introduction

Super-Speed plus USB 3.1 Type-C is the next revolution in I/O interconnect standards that will deliver the bandwidth and features required by PCs, consumer electronics and portable devices. With better performance, small form factor, high power capacity feature, Super-Speed plus USB 3.1 Type-C interface will be the trendy of IT technology. 

SUNIX USB2311C is a single-port Super-Speed USB 3.1 PCI Express card, and it’s compliant with the PCI Express Generation 3 specification for host PC system. Based on USB Type-C pure DFP (Downstream Facing Port) mode, it works up to 10 Gbps for data transfer when connecting to USB 3.1 compliant peripherals, while maintaining compatibility with existing USB peripheral devices. USB 3.1 performance is 2 times faster than USB 3.0 and 20 times faster than USB 2.0 connectivity.
 
With USB Type-C Receptacle, SUNIX USB2311C sports reversible plug orientation and cable direction, which means that users will no longer need to be concerned with plug orientation/cable direction, making it easier to plug in. The new connector is smaller and thinner design, but drive higher power output capacity to USB device. SUNIX USB2311C supports 5VDC@3000mA power output to USB device with over current protection on each USB port. This card is an ideal choice for external storage devices, digital cameras, webcam, video devices, and all other USB electronic devices.
 

Features








Specifications

Hardware

BUS PCI Express Spec 3.0, Single-Lane (x1)
Controller PCI Express USB 3.1 Host controller, Asmedia ASM1142
USB Standard eXtensible Host Controller Interface (xHCI) Rev1.1
IRQ & IO Assigned by System

USB Communication

Interface Universal Serial Bus 3.1 / 3.0 / 2.0 / 1.1
Speed SuperSpeed+(10Gbps), SuperSpeed(5Gbps), High Speed (480Mbps), Full Speed (12Mbps), Low Speed (1.5Mbps)
No. of Port 1-port
PCB Connector USB 3.1 USB Type-C port (Downstream Facing Port)
Protection ±15KV IEC61000-4-2 Air Gap Discharge
±8KV IEC61000-4-2 Contact Discharge

Power

Source +5VDC / SATA Power Connector Type
Output Capacity USB Type-C Port: +5VDC / Maximum 3.0A / each port
Note: Total power output capacity will be limited by system power supply.
Over Current Protection USB Type-C Port: +5VDC / Maximum 3.7A / each port
Power Consumption 1.1 W @ 3.3V (board only without power output to USB device)

Driver Support

Windows Windows 7 (X86/X64)
Windows 8.x / 10 (X86/X64) (Windows in-box driver)
Linux Linux 2.6.31 or later (Linux OS already implemented USB 3.0 driver)

Environment

Operation Temperature 0 to 60°C (32 to 140°F)
Operation Humidity 5 to 95% RH
Storage Temperature -20 to 70°C (-4 to 158°F)

Regulatory Approvals

EMC CE, FCC, VCCI, BSMI
Green RoHS, CRoHS, WEEE

Physical Characteristics

PCB Dimension 65.7 x 68.5 mm
Bracket Standard 120 mm (Low Profile 80mm)
Bracket Space 1

Support

Download Manual

Manual USB2311C Quick Installation Guide
Version V1.0
Update 2016-05-24 14:22:35
Size 1.7MB

Download Datasheet

Datasheet USB2311C Datasheet

Download Driver

Driver USB3.1 Windows Inbox Driver
OS
Windows 11 64bit
Windows 10 32/64 bit
Windows 8.1 32/64 bit
Windows 8.0 32/64 bit
Windows Server 2022 64bit
Windows Server 2019 64bit
Windows Server 2016 64bit
Windows Server 2012 R2 64-bit
Windows Server 2012 64bit
Driver ASMUSBHost_V116541WHQL
Version 1.16.54.1
Update 2019-03-08 14:08:31
Size 11.4MB
OS
Windows 7 SP1 32/64 bit
Windows Server 2008 R2 SP1 64bit
Driver USB3.1 Linux Inbox Driver
OS
Linux 4.6 above
Back to top
返回頂部
返回頂部