UTS1009D (phased out)
1 port USB-to-RS-232 Adapter
- Expands one independent RS-232 serial ports through USB interface.
- Supports Universal Serial Bus Plug-n-Play and Hot-Swapping feature.
- No IRQ, DMA, I/O address resource required.
- Supports USB 1.1 full speed 12Mbps and USB 2.0/3.0/3.1 compatible.
- Each serial port provides transmission rate up to 115.2Kbps.
- Built-in ± 15KV ESD protection for all serial signals.
- Compact Size and low power consumption.
- Supports both USB bus power mode without additional external power.
- Certified by CE, FCC, RoHS, and Microsoft WHQL approval.
- Support Microsoft Windows, Mac and Linux.
Introduction
SUNIX ComHub UTS series transform your Universal Serial Bus (USB) port into asynchronous RS-232 serial ports for communication with serial devices. The UTS1009D adapter is compatible with both USB 3.0, 2.0 and 1.1 specifications with serial ports communication speed up to 120Kbps. SUNIX ComHub provides a quick, simple and cost-effective solution to bring the advantages of serial communicating for kinds of commercial and industrial automation applications.
Specifications
Serial Communication
| Interface | RS-232 | Baud rate | 50bps ~115.2Kbps |
| Controller |
Prolific PL2303HXD (16C550 UART Compatible) |
Data bit | 5, 6, 7, 8 |
| BUS | Universal Serial Bus (USB) | Stop bit | 1, 1.5, 2 |
| No. of Port | 1-port | Parity | even, odd, none, mark, space |
| IRQ & IO | Assigned by System | Flow Control | None, Xon/Xoff, RTS/CTS |
| FIFO | 16 byte Hardware | ||
| Signal | TxD, RxD, RTS, CTS, DTR, DSR, DCD, RI, GND | ||
| Protection |
±15KV ESD protection for each signal Human Body Model (HBM) ±15KV IEC1000-4-2 Air Gap Discharge ±8KV ESD IEC61000-4-2 Contact Discharge |
||
| PCB Connector | DB9 Male | ||
Driver Support
| Windows Client | 7 / 8.x / 10 / 11 |
| Windows Server | 2008 / 2008R2 / 2012 / 2012R2 / 2016/ 2019 |
| Linux | Linux 2.4.3.1 and above |
| MAC | MAC OS 10.9/ 11 |
Regulatory Approvals
| Hardware | CE, FCC, VCCI, BSMI |
| Software | Microsoft WHQL Windows |
Environment
| Operation Temperature | 0 to 60°C (32 to 140°F) |
| Operation Humidity | 5 to 95% RH |
| Storage Temperature | -20 to 85°C (-4 to 185°F) |
Dimension
| PCB Dimension | 15 x 45 x 33 mm |
| Cable Length | 1200 mm (3.9ft) |
Support
Download Manual
| Manual | 771-UTS2009P0-002 |
|
| Version | Ver 1.0 | |
| Update | 2014-10-30 15:56:00 | |
| Size | 2.5MB |
| Manual | UTSX009 |
|
| Version | Ver.1.0 | |
| Update | 2019-07-12 13:51:11 | |
| Size | 293.4KB |
Download Datasheet
| Datasheet | UTS1009D Datasheet |
|
Download Driver
| Driver | PL23XX_Prolific_DriverInstaller_v408 | |
| Version | V4.0.8 | |
| Update | 2022-11-28 14:47:39 | |
| Size | 12.5MB | |
| OS |
Windows 11 64bit
Windows 10 32/64 bit
Windows 8.1 32/64 bit
Windows 8.0 32/64 bit
Windows 7 SP1 32/64 bit
Windows Vista SP2 32/64 bit
Windows Server 2019 64bit
Windows Server 2016 64bit
Windows Server 2012 R2 64-bit
Windows Server 2008 R2 SP1 64bit
Windows Server 2008 64-bit
|
| Driver | PL2303HXD_G_Mac Driver_v2_1_0_20210311 | |
| Version | V2.1.0 | |
| Update | 2021-07-26 09:59:12 | |
| Size | 513.2KB | |
| OS |
OS X Mavericks 10.9
OS X Yosemite 10.10
OS X El Capitan 10.11
OS X Sierra 10.12
OS X High Sierra 10.13
OS X Mojave 10.14
OS X Catalina 10.15
OS X Big Sur 11
|
UTS1009D (phased out)
1 port USB-to-RS-232 Adapter
- Expands one independent RS-232 serial ports through USB interface.
- Supports Universal Serial Bus Plug-n-Play and Hot-Swapping feature.
- No IRQ, DMA, I/O address resource required.
- Supports USB 1.1 full speed 12Mbps and USB 2.0/3.0/3.1 compatible.
- Each serial port provides transmission rate up to 115.2Kbps.
- Built-in ± 15KV ESD protection for all serial signals.
- Compact Size and low power consumption.
- Supports both USB bus power mode without additional external power.
- Certified by CE, FCC, RoHS, and Microsoft WHQL approval.
- Support Microsoft Windows, Mac and Linux.
Introduction
SUNIX ComHub UTS series transform your Universal Serial Bus (USB) port into asynchronous RS-232 serial ports for communication with serial devices. The UTS1009D adapter is compatible with both USB 3.0, 2.0 and 1.1 specifications with serial ports communication speed up to 120Kbps. SUNIX ComHub provides a quick, simple and cost-effective solution to bring the advantages of serial communicating for kinds of commercial and industrial automation applications.
Specifications
Serial Communication
| Interface | RS-232 | Baud rate | 50bps ~115.2Kbps |
| Controller |
Prolific PL2303HXD (16C550 UART Compatible) |
Data bit | 5, 6, 7, 8 |
| BUS | Universal Serial Bus (USB) | Stop bit | 1, 1.5, 2 |
| No. of Port | 1-port | Parity | even, odd, none, mark, space |
| IRQ & IO | Assigned by System | Flow Control | None, Xon/Xoff, RTS/CTS |
| FIFO | 16 byte Hardware | ||
| Signal | TxD, RxD, RTS, CTS, DTR, DSR, DCD, RI, GND | ||
| Protection |
±15KV ESD protection for each signal Human Body Model (HBM) ±15KV IEC1000-4-2 Air Gap Discharge ±8KV ESD IEC61000-4-2 Contact Discharge |
||
| PCB Connector | DB9 Male | ||
Driver Support
| Windows Client | 7 / 8.x / 10 / 11 |
| Windows Server | 2008 / 2008R2 / 2012 / 2012R2 / 2016/ 2019 |
| Linux | Linux 2.4.3.1 and above |
| MAC | MAC OS 10.9/ 11 |
Regulatory Approvals
| Hardware | CE, FCC, VCCI, BSMI |
| Software | Microsoft WHQL Windows |
Environment
| Operation Temperature | 0 to 60°C (32 to 140°F) |
| Operation Humidity | 5 to 95% RH |
| Storage Temperature | -20 to 85°C (-4 to 185°F) |
Dimension
| PCB Dimension | 15 x 45 x 33 mm |
| Cable Length | 1200 mm (3.9ft) |
Support
Download Manual
| Manual | 771-UTS2009P0-002 |
|
| Version | Ver 1.0 | |
| Update | 2014-10-30 15:56:00 | |
| Size | 2.5MB |
| Manual | UTSX009 |
|
| Version | Ver.1.0 | |
| Update | 2019-07-12 13:51:11 | |
| Size | 293.4KB |
Download Datasheet
| Datasheet | UTS1009D Datasheet |
|
Download Driver
| Driver | PL23XX_Prolific_DriverInstaller_v408 | |
| Version | V4.0.8 | |
| Update | 2022-11-28 14:47:39 | |
| Size | 12.5MB | |
| OS |
Windows 11 64bit
Windows 10 32/64 bit
Windows 8.1 32/64 bit
Windows 8.0 32/64 bit
Windows 7 SP1 32/64 bit
Windows Vista SP2 32/64 bit
Windows Server 2019 64bit
Windows Server 2016 64bit
Windows Server 2012 R2 64-bit
Windows Server 2008 R2 SP1 64bit
Windows Server 2008 64-bit
|
| Driver | PL2303HXD_G_Mac Driver_v2_1_0_20210311 | |
| Version | V2.1.0 | |
| Update | 2021-07-26 09:59:12 | |
| Size | 513.2KB | |
| OS |
OS X Mavericks 10.9
OS X Yosemite 10.10
OS X El Capitan 10.11
OS X Sierra 10.12
OS X High Sierra 10.13
OS X Mojave 10.14
OS X Catalina 10.15
OS X Big Sur 11
|
UTS1009D (phased out)
1 port USB-to-RS-232 Adapter
- Expands one independent RS-232 serial ports through USB interface.
- Supports Universal Serial Bus Plug-n-Play and Hot-Swapping feature.
- No IRQ, DMA, I/O address resource required.
- Supports USB 1.1 full speed 12Mbps and USB 2.0/3.0/3.1 compatible.
- Each serial port provides transmission rate up to 115.2Kbps.
- Built-in ± 15KV ESD protection for all serial signals.
- Compact Size and low power consumption.
- Supports both USB bus power mode without additional external power.
- Certified by CE, FCC, RoHS, and Microsoft WHQL approval.
- Support Microsoft Windows, Mac and Linux.
Introduction
SUNIX ComHub UTS series transform your Universal Serial Bus (USB) port into asynchronous RS-232 serial ports for communication with serial devices. The UTS1009D adapter is compatible with both USB 3.0, 2.0 and 1.1 specifications with serial ports communication speed up to 120Kbps. SUNIX ComHub provides a quick, simple and cost-effective solution to bring the advantages of serial communicating for kinds of commercial and industrial automation applications.
Specifications
Serial Communication
| Interface | RS-232 | Baud rate | 50bps ~115.2Kbps |
| Controller |
Prolific PL2303HXD (16C550 UART Compatible) |
Data bit | 5, 6, 7, 8 |
| BUS | Universal Serial Bus (USB) | Stop bit | 1, 1.5, 2 |
| No. of Port | 1-port | Parity | even, odd, none, mark, space |
| IRQ & IO | Assigned by System | Flow Control | None, Xon/Xoff, RTS/CTS |
| FIFO | 16 byte Hardware | ||
| Signal | TxD, RxD, RTS, CTS, DTR, DSR, DCD, RI, GND | ||
| Protection |
±15KV ESD protection for each signal Human Body Model (HBM) ±15KV IEC1000-4-2 Air Gap Discharge ±8KV ESD IEC61000-4-2 Contact Discharge |
||
| PCB Connector | DB9 Male | ||
Driver Support
| Windows Client | 7 / 8.x / 10 / 11 |
| Windows Server | 2008 / 2008R2 / 2012 / 2012R2 / 2016/ 2019 |
| Linux | Linux 2.4.3.1 and above |
| MAC | MAC OS 10.9/ 11 |
Regulatory Approvals
| Hardware | CE, FCC, VCCI, BSMI |
| Software | Microsoft WHQL Windows |
Environment
| Operation Temperature | 0 to 60°C (32 to 140°F) |
| Operation Humidity | 5 to 95% RH |
| Storage Temperature | -20 to 85°C (-4 to 185°F) |
Dimension
| PCB Dimension | 15 x 45 x 33 mm |
| Cable Length | 1200 mm (3.9ft) |
Support
Download Manual
| Manual | 771-UTS2009P0-002 |
|
| Version | Ver 1.0 | |
| Update | 2014-10-30 15:56:00 | |
| Size | 2.5MB |
| Manual | UTSX009 |
|
| Version | Ver.1.0 | |
| Update | 2019-07-12 13:51:11 | |
| Size | 293.4KB |
Download Datasheet
| Datasheet | UTS1009D Datasheet |
|
Download Driver
| Driver | PL23XX_Prolific_DriverInstaller_v408 | |
| Version | V4.0.8 | |
| Update | 2022-11-28 14:47:39 | |
| Size | 12.5MB | |
| OS |
Windows 11 64bit
Windows 10 32/64 bit
Windows 8.1 32/64 bit
Windows 8.0 32/64 bit
Windows 7 SP1 32/64 bit
Windows Vista SP2 32/64 bit
Windows Server 2019 64bit
Windows Server 2016 64bit
Windows Server 2012 R2 64-bit
Windows Server 2008 R2 SP1 64bit
Windows Server 2008 64-bit
|
| Driver | PL2303HXD_G_Mac Driver_v2_1_0_20210311 | |
| Version | V2.1.0 | |
| Update | 2021-07-26 09:59:12 | |
| Size | 513.2KB | |
| OS |
OS X Mavericks 10.9
OS X Yosemite 10.10
OS X El Capitan 10.11
OS X Sierra 10.12
OS X High Sierra 10.13
OS X Mojave 10.14
OS X Catalina 10.15
OS X Big Sur 11
|
UTS1009D (phased out)
1 port USB-to-RS-232 Adapter
- Expands one independent RS-232 serial ports through USB interface.
- Supports Universal Serial Bus Plug-n-Play and Hot-Swapping feature.
- No IRQ, DMA, I/O address resource required.
- Supports USB 1.1 full speed 12Mbps and USB 2.0/3.0/3.1 compatible.
- Each serial port provides transmission rate up to 115.2Kbps.
- Built-in ± 15KV ESD protection for all serial signals.
- Compact Size and low power consumption.
- Supports both USB bus power mode without additional external power.
- Certified by CE, FCC, RoHS, and Microsoft WHQL approval.
- Support Microsoft Windows, Mac and Linux.
SUNIX ComHub UTS series transform your Universal Serial Bus (USB) port into asynchronous RS-232 serial ports for communication with serial devices. The UTS1009D adapter is compatible with both USB 3.0, 2.0 and 1.1 specifications with serial ports communication speed up to 120Kbps. SUNIX ComHub provides a quick, simple and cost-effective solution to bring the advantages of serial communicating for kinds of commercial and industrial automation applications.
Introduction
SUNIX ComHub UTS series transform your Universal Serial Bus (USB) port into asynchronous RS-232 serial ports for communication with serial devices. The UTS1009D adapter is compatible with both USB 3.0, 2.0 and 1.1 specifications with serial ports communication speed up to 120Kbps. SUNIX ComHub provides a quick, simple and cost-effective solution to bring the advantages of serial communicating for kinds of commercial and industrial automation applications.
Specifications
Serial Communication
| Interface | RS-232 | Baud rate | 50bps ~115.2Kbps |
| Controller |
Prolific PL2303HXD (16C550 UART Compatible) |
Data bit | 5, 6, 7, 8 |
| BUS | Universal Serial Bus (USB) | Stop bit | 1, 1.5, 2 |
| No. of Port | 1-port | Parity | even, odd, none, mark, space |
| IRQ & IO | Assigned by System | Flow Control | None, Xon/Xoff, RTS/CTS |
| FIFO | 16 byte Hardware | ||
| Signal | TxD, RxD, RTS, CTS, DTR, DSR, DCD, RI, GND | ||
| Protection |
±15KV ESD protection for each signal Human Body Model (HBM) ±15KV IEC1000-4-2 Air Gap Discharge ±8KV ESD IEC61000-4-2 Contact Discharge |
||
| PCB Connector | DB9 Male | ||
Driver Support
| Windows Client | 7 / 8.x / 10 / 11 |
| Windows Server | 2008 / 2008R2 / 2012 / 2012R2 / 2016/ 2019 |
| Linux | Linux 2.4.3.1 and above |
| MAC | MAC OS 10.9/ 11 |
Regulatory Approvals
| Hardware | CE, FCC, VCCI, BSMI |
| Software | Microsoft WHQL Windows |
Environment
| Operation Temperature | 0 to 60°C (32 to 140°F) |
| Operation Humidity | 5 to 95% RH |
| Storage Temperature | -20 to 85°C (-4 to 185°F) |
Dimension
| PCB Dimension | 15 x 45 x 33 mm |
| Cable Length | 1200 mm (3.9ft) |
Support
Download Manual
| Manual | 771-UTS2009P0-002 |
|
| Version | Ver 1.0 | |
| Update | 2014-10-30 15:56:00 | |
| Size | 2.5MB |
| Manual | UTSX009 |
|
| Version | Ver.1.0 | |
| Update | 2019-07-12 13:51:11 | |
| Size | 293.4KB |
Download Datasheet
| Datasheet | UTS1009D Datasheet |
|
Download Driver
| Driver | PL23XX_Prolific_DriverInstaller_v408 | |
| Version | V4.0.8 | |
| Update | 2022-11-28 14:47:39 | |
| Size | 12.5MB | |
| OS |
Windows 11 64bit
Windows 10 32/64 bit
Windows 8.1 32/64 bit
Windows 8.0 32/64 bit
Windows 7 SP1 32/64 bit
Windows Vista SP2 32/64 bit
Windows Server 2019 64bit
Windows Server 2016 64bit
Windows Server 2012 R2 64-bit
Windows Server 2008 R2 SP1 64bit
Windows Server 2008 64-bit
|
| Driver | PL2303HXD_G_Mac Driver_v2_1_0_20210311 | |
| Version | V2.1.0 | |
| Update | 2021-07-26 09:59:12 | |
| Size | 513.2KB | |
| OS |
OS X Mavericks 10.9
OS X Yosemite 10.10
OS X El Capitan 10.11
OS X Sierra 10.12
OS X High Sierra 10.13
OS X Mojave 10.14
OS X Catalina 10.15
OS X Big Sur 11
|
