UTS4009PF

4-port USB to RS-232 Serial HUB
  • Expands 4 RS-232 ports on system via USB connection.
  • Supports Universal Serial Bus Plug-n-Play and Hot-Swapping feature.
  • Supports USB selective suspend.
  • No IRQ, DMA, I/O address resource required.
  • Supports USB 1.1 full speed 12Mbps, and it is USB 3.1/3.0/2.0 compatible.
  • Each serial port provides transmission rate up to 115.2Kbps.
  • Built-in ±15KV ESD protection for all serial signals.
  • Plug-n-Play, I/O address and IRQ assigned by BIOS.
  • Certified by CE, FCC, VCCI, BSMI, and RoHS.
  • Support Microsoft Windows, Linux, Mac.

Introduction

SUNIX ComHub UTS series transform your Universal Serial Bus (USB) port into asynchronous RS-232 serial ports for communication with serial devices. The UTS4009PF adapter is compatible with both USB 2.0 and 1.1 specifications and provides serial ports with transfer speed up to 115.2Kbps. It provides a quick, simple and cost-effective way to bring the advantages of data accessibility and mobile solution for kinds of commercial and industrial automation applications.

The UTS4000PF supports USB selective suspend. This feature allows the UTS4000PF to go into power saving mode after it remains in an idle state for a few seconds. The auto saving mode is terminated after UTS4000PF receiving an open port command from system, then UTS4000PF turns back to working mode.

Specifications

Description

Product Description 4 ports USB to RS-232 Serial Hub

Serial Communication

Interface RS-232
Controller Prolific PL2303GC 
Bus Interface Universal Serial Bus (USB) 2.0 / 1.1
No. of Port 4-port
IRQ & IO Assigned by System
FIFO 1024-byte bi-directional data FIFO buffers
Receive 768 byte Buffer Hardware
Transmit 256 byte Buffer Hardware
Signal TxD, RxD, RTS, CTS, DTR, DSR, DCD, RI, GND
Baud rate 50 bps to 115.2Kbps
Data bit 5,6,7,8
Stop bit 1,1.5,2
Parity None, Even, Odd, Space, Mark
Flow Control RTS/CTS and/or DSR/DTR, XON/XOFF
Protection ±15KV ESD protection for each signal Human Body Model 
±15KV IEC61000-4-2 Air Gap Discharge
±8KV IEC61000-4-2 Contact Discharge
Board connector DB9 Male

Driver Support

Microsoft Windows 7 / 8.x / 10(X86/X64) / 11
Windows Server 2008/2008R2 / 2012/2012R2/2016/2019
Linux Linux 2.4.3.1 and  later
MAC MAC OS 10.9/11

Regulatory Approvals

Hardware CE, FCC, VCCI, BSMI

Environment

Operating Temperature 0 to 60 °C ( 32 to 140 °F )
Operating Humidity 5% to 95% RH
Storage Temperature -20 to 85 °C ( -4 to 185 °F )

Power

Power Source USB Bus Power +5VDC (±5%)
External Power DC-Jack for 5VDC Power Adapter (Optional)

Mechanical

Dimension 180 x 70 x 26 mm
Cable Length 1500mm (5ft) USB Type A Plug to miniB cable
Case ABS
Weight 140 ± 5 g


Support

Download Datasheet

Datasheet UTS4009PF Datasheet EN

Download Guide

Guide UTS-GC/PF Series QIG_en

Download Driver

Driver PL23XX_Prolific_DriverInstaller_v408
Version V4.0.8
Update 2022-11-28 14:47:39
Size 12.5MB
OS
Windows 11 64bit
Windows 10 32/64 bit
Windows 8.1 32/64 bit
Windows 8.0 32/64 bit
Windows 7 SP1 32/64 bit
Windows Vista SP2 32/64 bit
Windows Server 2019 64bit
Windows Server 2016 64bit
Windows Server 2012 R2 64-bit
Windows Server 2008 R2 SP1 64bit
Windows Server 2008 64-bit
Driver PL2303HXD_G_Mac Driver_v2_1_0_20210311
Version V2.1.0
Update 2021-07-26 09:59:12
Size 513.2KB
OS
OS X Mavericks 10.9
OS X Yosemite 10.10
OS X El Capitan 10.11
OS X Sierra 10.12
OS X High Sierra 10.13
OS X Mojave 10.14
OS X Catalina 10.15
OS X Big Sur 11
Driver PL2303G_Linux_Driver_v1.0.6
Version V1.0.6
Update 2023-05-09 11:55:12
Size 657.3KB
OS
Linux 2.6.15~5.4.89

UTS4009PF

4-port USB to RS-232 Serial HUB
  • Expands 4 RS-232 ports on system via USB connection.
  • Supports Universal Serial Bus Plug-n-Play and Hot-Swapping feature.
  • Supports USB selective suspend.
  • No IRQ, DMA, I/O address resource required.
  • Supports USB 1.1 full speed 12Mbps, and it is USB 3.1/3.0/2.0 compatible.
  • Each serial port provides transmission rate up to 115.2Kbps.
  • Built-in ±15KV ESD protection for all serial signals.
  • Plug-n-Play, I/O address and IRQ assigned by BIOS.
  • Certified by CE, FCC, VCCI, BSMI, and RoHS.
  • Support Microsoft Windows, Linux, Mac.

Introduction

SUNIX ComHub UTS series transform your Universal Serial Bus (USB) port into asynchronous RS-232 serial ports for communication with serial devices. The UTS4009PF adapter is compatible with both USB 2.0 and 1.1 specifications and provides serial ports with transfer speed up to 115.2Kbps. It provides a quick, simple and cost-effective way to bring the advantages of data accessibility and mobile solution for kinds of commercial and industrial automation applications.

The UTS4000PF supports USB selective suspend. This feature allows the UTS4000PF to go into power saving mode after it remains in an idle state for a few seconds. The auto saving mode is terminated after UTS4000PF receiving an open port command from system, then UTS4000PF turns back to working mode.

Specifications

Description

Product Description 4 ports USB to RS-232 Serial Hub

Serial Communication

Interface RS-232
Controller Prolific PL2303GC 
Bus Interface Universal Serial Bus (USB) 2.0 / 1.1
No. of Port 4-port
IRQ & IO Assigned by System
FIFO 1024-byte bi-directional data FIFO buffers
Receive 768 byte Buffer Hardware
Transmit 256 byte Buffer Hardware
Signal TxD, RxD, RTS, CTS, DTR, DSR, DCD, RI, GND
Baud rate 50 bps to 115.2Kbps
Data bit 5,6,7,8
Stop bit 1,1.5,2
Parity None, Even, Odd, Space, Mark
Flow Control RTS/CTS and/or DSR/DTR, XON/XOFF
Protection ±15KV ESD protection for each signal Human Body Model 
±15KV IEC61000-4-2 Air Gap Discharge
±8KV IEC61000-4-2 Contact Discharge
Board connector DB9 Male

Driver Support

Microsoft Windows 7 / 8.x / 10(X86/X64) / 11
Windows Server 2008/2008R2 / 2012/2012R2/2016/2019
Linux Linux 2.4.3.1 and  later
MAC MAC OS 10.9/11

Regulatory Approvals

Hardware CE, FCC, VCCI, BSMI

Environment

Operating Temperature 0 to 60 °C ( 32 to 140 °F )
Operating Humidity 5% to 95% RH
Storage Temperature -20 to 85 °C ( -4 to 185 °F )

Power

Power Source USB Bus Power +5VDC (±5%)
External Power DC-Jack for 5VDC Power Adapter (Optional)

Mechanical

Dimension 180 x 70 x 26 mm
Cable Length 1500mm (5ft) USB Type A Plug to miniB cable
Case ABS
Weight 140 ± 5 g


Support

Download Datasheet

Datasheet UTS4009PF Datasheet EN

Download Guide

Guide UTS-GC/PF Series QIG_en

Download Driver

Driver PL23XX_Prolific_DriverInstaller_v408
Version V4.0.8
Update 2022-11-28 14:47:39
Size 12.5MB
OS
Windows 11 64bit
Windows 10 32/64 bit
Windows 8.1 32/64 bit
Windows 8.0 32/64 bit
Windows 7 SP1 32/64 bit
Windows Vista SP2 32/64 bit
Windows Server 2019 64bit
Windows Server 2016 64bit
Windows Server 2012 R2 64-bit
Windows Server 2008 R2 SP1 64bit
Windows Server 2008 64-bit
Driver PL2303HXD_G_Mac Driver_v2_1_0_20210311
Version V2.1.0
Update 2021-07-26 09:59:12
Size 513.2KB
OS
OS X Mavericks 10.9
OS X Yosemite 10.10
OS X El Capitan 10.11
OS X Sierra 10.12
OS X High Sierra 10.13
OS X Mojave 10.14
OS X Catalina 10.15
OS X Big Sur 11
Driver PL2303G_Linux_Driver_v1.0.6
Version V1.0.6
Update 2023-05-09 11:55:12
Size 657.3KB
OS
Linux 2.6.15~5.4.89

UTS4009PF

4-port USB to RS-232 Serial HUB
  • Expands 4 RS-232 ports on system via USB connection.
  • Supports Universal Serial Bus Plug-n-Play and Hot-Swapping feature.
  • Supports USB selective suspend.
  • No IRQ, DMA, I/O address resource required.
  • Supports USB 1.1 full speed 12Mbps, and it is USB 3.1/3.0/2.0 compatible.
  • Each serial port provides transmission rate up to 115.2Kbps.
  • Built-in ±15KV ESD protection for all serial signals.
  • Plug-n-Play, I/O address and IRQ assigned by BIOS.
  • Certified by CE, FCC, VCCI, BSMI, and RoHS.
  • Support Microsoft Windows, Linux, Mac.

Introduction

SUNIX ComHub UTS series transform your Universal Serial Bus (USB) port into asynchronous RS-232 serial ports for communication with serial devices. The UTS4009PF adapter is compatible with both USB 2.0 and 1.1 specifications and provides serial ports with transfer speed up to 115.2Kbps. It provides a quick, simple and cost-effective way to bring the advantages of data accessibility and mobile solution for kinds of commercial and industrial automation applications.

The UTS4000PF supports USB selective suspend. This feature allows the UTS4000PF to go into power saving mode after it remains in an idle state for a few seconds. The auto saving mode is terminated after UTS4000PF receiving an open port command from system, then UTS4000PF turns back to working mode.

Specifications

Description

Product Description 4 ports USB to RS-232 Serial Hub

Serial Communication

Interface RS-232
Controller Prolific PL2303GC 
Bus Interface Universal Serial Bus (USB) 2.0 / 1.1
No. of Port 4-port
IRQ & IO Assigned by System
FIFO 1024-byte bi-directional data FIFO buffers
Receive 768 byte Buffer Hardware
Transmit 256 byte Buffer Hardware
Signal TxD, RxD, RTS, CTS, DTR, DSR, DCD, RI, GND
Baud rate 50 bps to 115.2Kbps
Data bit 5,6,7,8
Stop bit 1,1.5,2
Parity None, Even, Odd, Space, Mark
Flow Control RTS/CTS and/or DSR/DTR, XON/XOFF
Protection ±15KV ESD protection for each signal Human Body Model 
±15KV IEC61000-4-2 Air Gap Discharge
±8KV IEC61000-4-2 Contact Discharge
Board connector DB9 Male

Driver Support

Microsoft Windows 7 / 8.x / 10(X86/X64) / 11
Windows Server 2008/2008R2 / 2012/2012R2/2016/2019
Linux Linux 2.4.3.1 and  later
MAC MAC OS 10.9/11

Regulatory Approvals

Hardware CE, FCC, VCCI, BSMI

Environment

Operating Temperature 0 to 60 °C ( 32 to 140 °F )
Operating Humidity 5% to 95% RH
Storage Temperature -20 to 85 °C ( -4 to 185 °F )

Power

Power Source USB Bus Power +5VDC (±5%)
External Power DC-Jack for 5VDC Power Adapter (Optional)

Mechanical

Dimension 180 x 70 x 26 mm
Cable Length 1500mm (5ft) USB Type A Plug to miniB cable
Case ABS
Weight 140 ± 5 g


Support

Download Datasheet

Datasheet UTS4009PF Datasheet EN

Download Guide

Guide UTS-GC/PF Series QIG_en

Download Driver

Driver PL23XX_Prolific_DriverInstaller_v408
Version V4.0.8
Update 2022-11-28 14:47:39
Size 12.5MB
OS
Windows 11 64bit
Windows 10 32/64 bit
Windows 8.1 32/64 bit
Windows 8.0 32/64 bit
Windows 7 SP1 32/64 bit
Windows Vista SP2 32/64 bit
Windows Server 2019 64bit
Windows Server 2016 64bit
Windows Server 2012 R2 64-bit
Windows Server 2008 R2 SP1 64bit
Windows Server 2008 64-bit
Driver PL2303HXD_G_Mac Driver_v2_1_0_20210311
Version V2.1.0
Update 2021-07-26 09:59:12
Size 513.2KB
OS
OS X Mavericks 10.9
OS X Yosemite 10.10
OS X El Capitan 10.11
OS X Sierra 10.12
OS X High Sierra 10.13
OS X Mojave 10.14
OS X Catalina 10.15
OS X Big Sur 11
Driver PL2303G_Linux_Driver_v1.0.6
Version V1.0.6
Update 2023-05-09 11:55:12
Size 657.3KB
OS
Linux 2.6.15~5.4.89

UTS4009PF

4-port USB to RS-232 Serial HUB
  • Expands 4 RS-232 ports on system via USB connection.
  • Supports Universal Serial Bus Plug-n-Play and Hot-Swapping feature.
  • Supports USB selective suspend.
  • No IRQ, DMA, I/O address resource required.
  • Supports USB 1.1 full speed 12Mbps, and it is USB 3.1/3.0/2.0 compatible.
  • Each serial port provides transmission rate up to 115.2Kbps.
  • Built-in ±15KV ESD protection for all serial signals.
  • Plug-n-Play, I/O address and IRQ assigned by BIOS.
  • Certified by CE, FCC, VCCI, BSMI, and RoHS.
  • Support Microsoft Windows, Linux, Mac.

SUNIX ComHub UTS series transform your Universal Serial Bus (USB) port into asynchronous RS-232 serial ports for communication with serial devices. The UTS4009PF adapter is compatible with both USB 2.0 and 1.1 specifications and provides serial ports with transfer speed up to 115.2Kbps. It provides a quick, simple and cost-effective way to bring the advantages of data accessibility and mobile solution for kinds of commercial and industrial automation applications.

The UTS4000PF supports USB selective suspend. This feature allows the UTS4000PF to go into power saving mode after it remains in an idle state for a few seconds. The auto saving mode is terminated after UTS4000PF receiving an open port command from system, then UTS4000PF turns back to working mode.

Introduction

SUNIX ComHub UTS series transform your Universal Serial Bus (USB) port into asynchronous RS-232 serial ports for communication with serial devices. The UTS4009PF adapter is compatible with both USB 2.0 and 1.1 specifications and provides serial ports with transfer speed up to 115.2Kbps. It provides a quick, simple and cost-effective way to bring the advantages of data accessibility and mobile solution for kinds of commercial and industrial automation applications.

The UTS4000PF supports USB selective suspend. This feature allows the UTS4000PF to go into power saving mode after it remains in an idle state for a few seconds. The auto saving mode is terminated after UTS4000PF receiving an open port command from system, then UTS4000PF turns back to working mode.

Specifications

Description

Product Description 4 ports USB to RS-232 Serial Hub

Serial Communication

Interface RS-232
Controller Prolific PL2303GC 
Bus Interface Universal Serial Bus (USB) 2.0 / 1.1
No. of Port 4-port
IRQ & IO Assigned by System
FIFO 1024-byte bi-directional data FIFO buffers
Receive 768 byte Buffer Hardware
Transmit 256 byte Buffer Hardware
Signal TxD, RxD, RTS, CTS, DTR, DSR, DCD, RI, GND
Baud rate 50 bps to 115.2Kbps
Data bit 5,6,7,8
Stop bit 1,1.5,2
Parity None, Even, Odd, Space, Mark
Flow Control RTS/CTS and/or DSR/DTR, XON/XOFF
Protection ±15KV ESD protection for each signal Human Body Model 
±15KV IEC61000-4-2 Air Gap Discharge
±8KV IEC61000-4-2 Contact Discharge
Board connector DB9 Male

Driver Support

Microsoft Windows 7 / 8.x / 10(X86/X64) / 11
Windows Server 2008/2008R2 / 2012/2012R2/2016/2019
Linux Linux 2.4.3.1 and  later
MAC MAC OS 10.9/11

Regulatory Approvals

Hardware CE, FCC, VCCI, BSMI

Environment

Operating Temperature 0 to 60 °C ( 32 to 140 °F )
Operating Humidity 5% to 95% RH
Storage Temperature -20 to 85 °C ( -4 to 185 °F )

Power

Power Source USB Bus Power +5VDC (±5%)
External Power DC-Jack for 5VDC Power Adapter (Optional)

Mechanical

Dimension 180 x 70 x 26 mm
Cable Length 1500mm (5ft) USB Type A Plug to miniB cable
Case ABS
Weight 140 ± 5 g


Support

Download Datasheet

Datasheet UTS4009PF Datasheet EN

Download Guide

Guide UTS-GC/PF Series QIG_en

Download Driver

Driver PL23XX_Prolific_DriverInstaller_v408
Version V4.0.8
Update 2022-11-28 14:47:39
Size 12.5MB
OS
Windows 11 64bit
Windows 10 32/64 bit
Windows 8.1 32/64 bit
Windows 8.0 32/64 bit
Windows 7 SP1 32/64 bit
Windows Vista SP2 32/64 bit
Windows Server 2019 64bit
Windows Server 2016 64bit
Windows Server 2012 R2 64-bit
Windows Server 2008 R2 SP1 64bit
Windows Server 2008 64-bit
Driver PL2303HXD_G_Mac Driver_v2_1_0_20210311
Version V2.1.0
Update 2021-07-26 09:59:12
Size 513.2KB
OS
OS X Mavericks 10.9
OS X Yosemite 10.10
OS X El Capitan 10.11
OS X Sierra 10.12
OS X High Sierra 10.13
OS X Mojave 10.14
OS X Catalina 10.15
OS X Big Sur 11
Driver PL2303G_Linux_Driver_v1.0.6
Version V1.0.6
Update 2023-05-09 11:55:12
Size 657.3KB
OS
Linux 2.6.15~5.4.89
Back to top
返回頂部
返回頂部