iDevicePort for iOS Ethernet enabled 2-port RS-232 & 2-port USB 2.0 Replicator
  • Extend dual USB2.0 and dual RS-232 ports over Local Area Network.
  • Built-in SUNIX DevicePort DPL2000Q High-Performance Ethernet-UART controller.
  • ESD protection for all serial signal lines meeting IEC-61000-4-2 standard.
iDevicePort for iOS Ethernet enabled 3-port RS-232 & 2-port USB 2.0 Replicator
  • Extend 3 USB 2.0 and 2 RS-232 ports over Local Area Network.
  • Built-in SUNIX DevicePort DPL2000Q High-Performance Ethernet-UART controller.
  • ESD protection for all serial signal lines meeting IEC-61000-4-2 standard.
2-port USB 2.0 PCI Express Add-On Card
  • Compliance with PCI Express Base Specification Reversion 1.1.
  • Compliant with the Universal Serial Bus (USB) Specification Revision 2.0
  • High performance native USB 2.0 PCI Express EHCI/OHCI host controller on board.
2-port USB 2.0 PCI Express Low Profile Add-On Card
  • Compliance with PCI Express Base Specification Reversion 1.1.
  • Compliant with the Universal Serial Bus (USB) Specification Revision 2.0
  • High performance native USB 2.0 PCI Express EHCI/OHCI host controller on board.
1 port USB-to-RS-232 Adapter
  • Expands one independent RS-232 serial port through USB interface.
  • Supports Universal Serial Bus Plug-n-Play and Hot-Swapping feature.
  • No IRQ, DMA, I/O address resource required.
iDevicePort for iOS Ethernet enabled 2-port RS-232 & 2-port USB 2.0 Replicator
  • Extend dual USB2.0 and dual RS-232 ports over Local Area Network.
  • Built-in SUNIX DevicePort DPL2000Q High-Performance Ethernet-UART controller.
  • ESD protection for all serial signal lines meeting IEC-61000-4-2 standard.
iDevicePort for iOS Ethernet enabled 3-port RS-232 & 2-port USB 2.0 Replicator
  • Extend 3 USB 2.0 and 2 RS-232 ports over Local Area Network.
  • Built-in SUNIX DevicePort DPL2000Q High-Performance Ethernet-UART controller.
  • ESD protection for all serial signal lines meeting IEC-61000-4-2 standard.
2-port USB 2.0 PCI Express Add-On Card
  • Compliance with PCI Express Base Specification Reversion 1.1.
  • Compliant with the Universal Serial Bus (USB) Specification Revision 2.0
  • High performance native USB 2.0 PCI Express EHCI/OHCI host controller on board.
2-port USB 2.0 PCI Express Low Profile Add-On Card
  • Compliance with PCI Express Base Specification Reversion 1.1.
  • Compliant with the Universal Serial Bus (USB) Specification Revision 2.0
  • High performance native USB 2.0 PCI Express EHCI/OHCI host controller on board.
1 port USB-to-RS-232 Adapter
  • Expands one independent RS-232 serial port through USB interface.
  • Supports Universal Serial Bus Plug-n-Play and Hot-Swapping feature.
  • No IRQ, DMA, I/O address resource required.
iDevicePort for iOS Ethernet enabled 2-port RS-232 & 2-port USB 2.0 Replicator
  • Extend dual USB2.0 and dual RS-232 ports over Local Area Network.
  • Built-in SUNIX DevicePort DPL2000Q High-Performance Ethernet-UART controller.
  • ESD protection for all serial signal lines meeting IEC-61000-4-2 standard.
iDevicePort for iOS Ethernet enabled 3-port RS-232 & 2-port USB 2.0 Replicator
  • Extend 3 USB 2.0 and 2 RS-232 ports over Local Area Network.
  • Built-in SUNIX DevicePort DPL2000Q High-Performance Ethernet-UART controller.
  • ESD protection for all serial signal lines meeting IEC-61000-4-2 standard.
2-port USB 2.0 PCI Express Add-On Card
  • Compliance with PCI Express Base Specification Reversion 1.1.
  • Compliant with the Universal Serial Bus (USB) Specification Revision 2.0
  • High performance native USB 2.0 PCI Express EHCI/OHCI host controller on board.
2-port USB 2.0 PCI Express Low Profile Add-On Card
  • Compliance with PCI Express Base Specification Reversion 1.1.
  • Compliant with the Universal Serial Bus (USB) Specification Revision 2.0
  • High performance native USB 2.0 PCI Express EHCI/OHCI host controller on board.
1 port USB-to-RS-232 Adapter
  • Expands one independent RS-232 serial port through USB interface.
  • Supports Universal Serial Bus Plug-n-Play and Hot-Swapping feature.
  • No IRQ, DMA, I/O address resource required.
iDevicePort for iOS Ethernet enabled 2-port RS-232 & 2-port USB 2.0 Replicator
  • Extend dual USB2.0 and dual RS-232 ports over Local Area Network.
  • Built-in SUNIX DevicePort DPL2000Q High-Performance Ethernet-UART controller.
  • ESD protection for all serial signal lines meeting IEC-61000-4-2 standard.
iDevicePort for iOS Ethernet enabled 3-port RS-232 & 2-port USB 2.0 Replicator
  • Extend 3 USB 2.0 and 2 RS-232 ports over Local Area Network.
  • Built-in SUNIX DevicePort DPL2000Q High-Performance Ethernet-UART controller.
  • ESD protection for all serial signal lines meeting IEC-61000-4-2 standard.
2-port USB 2.0 PCI Express Add-On Card
  • Compliance with PCI Express Base Specification Reversion 1.1.
  • Compliant with the Universal Serial Bus (USB) Specification Revision 2.0
  • High performance native USB 2.0 PCI Express EHCI/OHCI host controller on board.
2-port USB 2.0 PCI Express Low Profile Add-On Card
  • Compliance with PCI Express Base Specification Reversion 1.1.
  • Compliant with the Universal Serial Bus (USB) Specification Revision 2.0
  • High performance native USB 2.0 PCI Express EHCI/OHCI host controller on board.
1 port USB-to-RS-232 Adapter
  • Expands one independent RS-232 serial port through USB interface.
  • Supports Universal Serial Bus Plug-n-Play and Hot-Swapping feature.
  • No IRQ, DMA, I/O address resource required.