IPC-C4443I

Mini PCIe Industrial I/O Control Card
4-ch Isolated Digital Input
4-ch Isolated Digital Output
Board Level:
  • Suitable for Mini PCIe slot on PCI Express communication.
  • Designed to meet PCI Express Base Specification Revision 2.1.
  • With high reliable SUNIX QiuNiu Digital-I/O controller.
  • Plug-n-Play, I/O address and IRQ assigned by system.
  • Ultra low power consumption (<1.5W) design for green environment and industrial application.
  • High quality electronic components, low impedance and high stability ensure product quality and reliability.
  • Support Microsoft Windows 10/11 and Linux with C, C# and Python programming language sample code.
  • Capable of engaging with EdgeX device C SDK for EdgeX service development.
  • Certified by CE, FCC, RoHS, and Microsoft approvals.
  • With low profile bracket extension board to meet various of Edge PC chassis.
 
Digital I/O Communication:
  • Expands isolated four (4) digital input channels with features for all channels.
    • Support both NPN & PNP devices
    • Support both dry and wet contact connections
    • With digital filter for noise reduction
    • Built-in 32-bit counter for all digital in channels
  • Expands isolated four (4) NPN type digital output channels with initial value (Booting & Restart) protection.
  • Each channel built-in 2.5KV isolation protection for signal and power, allowing the input signals to be completely floated so as to prevent ground loops.

Introduction

SUNIX IPC-C4443I, industrial isolated digital I/O Mini PCIe card, is designed for PC-based IoT Gateway or Edge Computer that enables data acquisition and I/O controls in industrial automation. This board built-in SUNIX Digital-I/O controller, QiuNiu, and also built with many of SUNIX advanced features and technologies. In addition, SUNIX provides API software and SDK library, allowing users to program under Windows 10/11 and Linux operating systems. The software package includes a dynamic library.dll, C, C# and Python programming language sample code, making it easier to develop application software. SUNIX IPC-C4443I board enriches digital I/O expandable capacity with cost-efficient design; it is the best digital I/O control solution for lite-industrial applications.

Specifications

Board Communication

Interface Mini PCI Express
Controller SUNIX QiuNiu Digital-I/O controller
BUS PCI Express Gen2 x 1 (single lan)
IRQ & IO Assigned by System
Protection ±15KV IEC6000-4-2 Air Discharge
±8KV IEC61000-4-2 Contact Discharge

Digital Input Communication

Type NPN & PNP
Channel 4-channel
Dry Contact Logic Level 0: Open;
Logic Level 1: Close to GND
Wet Contact Logic Level 0: 0 to 3VDC;
Logic Level 1: 10 to 50VDC
Input Resistance 10KΩ
Isolation 2500 VDC
Frequency Input Range 2KHz max
Pin Define DI1~DI4, COM, GND
Counter 32-bit counter for all channel
Interrupt Mode Event trigger (Rising Edge, Falling Edge, Both modes) & polling for all channels
Digital Filter Digital filter for noise reduction
PCB Connector Terminal Block on extension board

Digital Output Communication

Type NPN
Channel 4-channel
Voltage Range 3.5 to 40VDC
Current 500mA per Channel
Isolation 2500 VDC
Pin Define DO1~DO4, PWR, GND
Initial Protection Load preset output value automatically during booting and restart
PCB Connector Terminal Block on extension board


Software Support

OS

Windows 10 (X86/X64) / 11, Linux

SDK Library: Supporting C, C++, C# and Python languages. 
C, C# and Python sample code available

Third Party Software support

Capable of engaging with EdgeX device C SDK for EdgeX service development.

Regulatory Approvals

Hardware

CE / FCC / VCCI / BSMI

Declaration

Green Product

RoHS, CRoHS, WEEE

Environment

Operation Temperature

-20 to 70°C (-4 to 158°F)

Operation Humidity

5 to 95% (non-condensing)

Storage Temperature

-20 to 70°C (-4 to 158°F)

Dimension

PCB Dimension

Mini PCIe card 50.95x30mm / Extension board 64 x 45 mm

Bracket

Low Profile 79.2mm

Bracket Space

1

 

Accessories

Including Accessories

Extension board w/ low profile bracket
  • Low Profile Bracket(on board) 79.2mm
DIO Terminal block
  • Part Number: 1PCP-TF51201M00001
DIO Ribbon Cable
  • Part Number: 1WRL-C014C22052000
  • Length: 15cm for Extension Board
DIO Standard Bracket
  • Standard 121 mm
  • Bracket Space: 1

Support

Download Manual

Manual DIO Series User Manual
Version Ver. 1.0
Update 2023-02-02 10:21:03
Size 1.5MB

Download Datasheet

Datasheet IPC-C4443I Datasheet EN

Download Guide

Guide Industrial Digital I/O Card Quick Installation Guide

Download Driver

Driver Windows IO Expansion Card Driver V1.3.2.0 (WHQL) - 2022031401
Version V1.3.2.0
Update 2022-03-15 13:47:31
Size 4.6MB
OS
Windows 11 64bit
Windows 10 32/64 bit
API Windows SDC API V1.0.4.0
Version Ver 1.0.4.0
Update 2022-06-28 10:01:32
Size 4.7MB
OS
Windows 11 64bit
Windows 10 32/64 bit
Driver Linux IO Expansion Card Driver V2.0.0.0
Version V2.0.0,.0
Update 2023-12-25 10:43:17
Size 5.9MB
OS
Linux Kernel 5.4

IPC-C4443I

Mini PCIe Industrial I/O Control Card
4-ch Isolated Digital Input
4-ch Isolated Digital Output
Board Level:
  • Suitable for Mini PCIe slot on PCI Express communication.
  • Designed to meet PCI Express Base Specification Revision 2.1.
  • With high reliable SUNIX QiuNiu Digital-I/O controller.
  • Plug-n-Play, I/O address and IRQ assigned by system.
  • Ultra low power consumption (<1.5W) design for green environment and industrial application.
  • High quality electronic components, low impedance and high stability ensure product quality and reliability.
  • Support Microsoft Windows 10/11 and Linux with C, C# and Python programming language sample code.
  • Capable of engaging with EdgeX device C SDK for EdgeX service development.
  • Certified by CE, FCC, RoHS, and Microsoft approvals.
  • With low profile bracket extension board to meet various of Edge PC chassis.
 
Digital I/O Communication:
  • Expands isolated four (4) digital input channels with features for all channels.
    • Support both NPN & PNP devices
    • Support both dry and wet contact connections
    • With digital filter for noise reduction
    • Built-in 32-bit counter for all digital in channels
  • Expands isolated four (4) NPN type digital output channels with initial value (Booting & Restart) protection.
  • Each channel built-in 2.5KV isolation protection for signal and power, allowing the input signals to be completely floated so as to prevent ground loops.

Introduction

SUNIX IPC-C4443I, industrial isolated digital I/O Mini PCIe card, is designed for PC-based IoT Gateway or Edge Computer that enables data acquisition and I/O controls in industrial automation. This board built-in SUNIX Digital-I/O controller, QiuNiu, and also built with many of SUNIX advanced features and technologies. In addition, SUNIX provides API software and SDK library, allowing users to program under Windows 10/11 and Linux operating systems. The software package includes a dynamic library.dll, C, C# and Python programming language sample code, making it easier to develop application software. SUNIX IPC-C4443I board enriches digital I/O expandable capacity with cost-efficient design; it is the best digital I/O control solution for lite-industrial applications.

Specifications

Board Communication

Interface Mini PCI Express
Controller SUNIX QiuNiu Digital-I/O controller
BUS PCI Express Gen2 x 1 (single lan)
IRQ & IO Assigned by System
Protection ±15KV IEC6000-4-2 Air Discharge
±8KV IEC61000-4-2 Contact Discharge

Digital Input Communication

Type NPN & PNP
Channel 4-channel
Dry Contact Logic Level 0: Open;
Logic Level 1: Close to GND
Wet Contact Logic Level 0: 0 to 3VDC;
Logic Level 1: 10 to 50VDC
Input Resistance 10KΩ
Isolation 2500 VDC
Frequency Input Range 2KHz max
Pin Define DI1~DI4, COM, GND
Counter 32-bit counter for all channel
Interrupt Mode Event trigger (Rising Edge, Falling Edge, Both modes) & polling for all channels
Digital Filter Digital filter for noise reduction
PCB Connector Terminal Block on extension board

Digital Output Communication

Type NPN
Channel 4-channel
Voltage Range 3.5 to 40VDC
Current 500mA per Channel
Isolation 2500 VDC
Pin Define DO1~DO4, PWR, GND
Initial Protection Load preset output value automatically during booting and restart
PCB Connector Terminal Block on extension board


Software Support

OS

Windows 10 (X86/X64) / 11, Linux

SDK Library: Supporting C, C++, C# and Python languages. 
C, C# and Python sample code available

Third Party Software support

Capable of engaging with EdgeX device C SDK for EdgeX service development.

Regulatory Approvals

Hardware

CE / FCC / VCCI / BSMI

Declaration

Green Product

RoHS, CRoHS, WEEE

Environment

Operation Temperature

-20 to 70°C (-4 to 158°F)

Operation Humidity

5 to 95% (non-condensing)

Storage Temperature

-20 to 70°C (-4 to 158°F)

Dimension

PCB Dimension

Mini PCIe card 50.95x30mm / Extension board 64 x 45 mm

Bracket

Low Profile 79.2mm

Bracket Space

1

 

Accessories

Including Accessories

Extension board w/ low profile bracket
  • Low Profile Bracket(on board) 79.2mm
DIO Terminal block
  • Part Number: 1PCP-TF51201M00001
DIO Ribbon Cable
  • Part Number: 1WRL-C014C22052000
  • Length: 15cm for Extension Board
DIO Standard Bracket
  • Standard 121 mm
  • Bracket Space: 1

Support

Download Manual

Manual DIO Series User Manual
Version Ver. 1.0
Update 2023-02-02 10:21:03
Size 1.5MB

Download Datasheet

Datasheet IPC-C4443I Datasheet EN

Download Guide

Guide Industrial Digital I/O Card Quick Installation Guide

Download Driver

Driver Windows IO Expansion Card Driver V1.3.2.0 (WHQL) - 2022031401
Version V1.3.2.0
Update 2022-03-15 13:47:31
Size 4.6MB
OS
Windows 11 64bit
Windows 10 32/64 bit
API Windows SDC API V1.0.4.0
Version Ver 1.0.4.0
Update 2022-06-28 10:01:32
Size 4.7MB
OS
Windows 11 64bit
Windows 10 32/64 bit
Driver Linux IO Expansion Card Driver V2.0.0.0
Version V2.0.0,.0
Update 2023-12-25 10:43:17
Size 5.9MB
OS
Linux Kernel 5.4

IPC-C4443I

Mini PCIe Industrial I/O Control Card
4-ch Isolated Digital Input
4-ch Isolated Digital Output
Board Level:
  • Suitable for Mini PCIe slot on PCI Express communication.
  • Designed to meet PCI Express Base Specification Revision 2.1.
  • With high reliable SUNIX QiuNiu Digital-I/O controller.
  • Plug-n-Play, I/O address and IRQ assigned by system.
  • Ultra low power consumption (<1.5W) design for green environment and industrial application.
  • High quality electronic components, low impedance and high stability ensure product quality and reliability.
  • Support Microsoft Windows 10/11 and Linux with C, C# and Python programming language sample code.
  • Capable of engaging with EdgeX device C SDK for EdgeX service development.
  • Certified by CE, FCC, RoHS, and Microsoft approvals.
  • With low profile bracket extension board to meet various of Edge PC chassis.
 
Digital I/O Communication:
  • Expands isolated four (4) digital input channels with features for all channels.
    • Support both NPN & PNP devices
    • Support both dry and wet contact connections
    • With digital filter for noise reduction
    • Built-in 32-bit counter for all digital in channels
  • Expands isolated four (4) NPN type digital output channels with initial value (Booting & Restart) protection.
  • Each channel built-in 2.5KV isolation protection for signal and power, allowing the input signals to be completely floated so as to prevent ground loops.

Introduction

SUNIX IPC-C4443I, industrial isolated digital I/O Mini PCIe card, is designed for PC-based IoT Gateway or Edge Computer that enables data acquisition and I/O controls in industrial automation. This board built-in SUNIX Digital-I/O controller, QiuNiu, and also built with many of SUNIX advanced features and technologies. In addition, SUNIX provides API software and SDK library, allowing users to program under Windows 10/11 and Linux operating systems. The software package includes a dynamic library.dll, C, C# and Python programming language sample code, making it easier to develop application software. SUNIX IPC-C4443I board enriches digital I/O expandable capacity with cost-efficient design; it is the best digital I/O control solution for lite-industrial applications.

Specifications

Board Communication

Interface Mini PCI Express
Controller SUNIX QiuNiu Digital-I/O controller
BUS PCI Express Gen2 x 1 (single lan)
IRQ & IO Assigned by System
Protection ±15KV IEC6000-4-2 Air Discharge
±8KV IEC61000-4-2 Contact Discharge

Digital Input Communication

Type NPN & PNP
Channel 4-channel
Dry Contact Logic Level 0: Open;
Logic Level 1: Close to GND
Wet Contact Logic Level 0: 0 to 3VDC;
Logic Level 1: 10 to 50VDC
Input Resistance 10KΩ
Isolation 2500 VDC
Frequency Input Range 2KHz max
Pin Define DI1~DI4, COM, GND
Counter 32-bit counter for all channel
Interrupt Mode Event trigger (Rising Edge, Falling Edge, Both modes) & polling for all channels
Digital Filter Digital filter for noise reduction
PCB Connector Terminal Block on extension board

Digital Output Communication

Type NPN
Channel 4-channel
Voltage Range 3.5 to 40VDC
Current 500mA per Channel
Isolation 2500 VDC
Pin Define DO1~DO4, PWR, GND
Initial Protection Load preset output value automatically during booting and restart
PCB Connector Terminal Block on extension board


Software Support

OS

Windows 10 (X86/X64) / 11, Linux

SDK Library: Supporting C, C++, C# and Python languages. 
C, C# and Python sample code available

Third Party Software support

Capable of engaging with EdgeX device C SDK for EdgeX service development.

Regulatory Approvals

Hardware

CE / FCC / VCCI / BSMI

Declaration

Green Product

RoHS, CRoHS, WEEE

Environment

Operation Temperature

-20 to 70°C (-4 to 158°F)

Operation Humidity

5 to 95% (non-condensing)

Storage Temperature

-20 to 70°C (-4 to 158°F)

Dimension

PCB Dimension

Mini PCIe card 50.95x30mm / Extension board 64 x 45 mm

Bracket

Low Profile 79.2mm

Bracket Space

1

 

Accessories

Including Accessories

Extension board w/ low profile bracket
  • Low Profile Bracket(on board) 79.2mm
DIO Terminal block
  • Part Number: 1PCP-TF51201M00001
DIO Ribbon Cable
  • Part Number: 1WRL-C014C22052000
  • Length: 15cm for Extension Board
DIO Standard Bracket
  • Standard 121 mm
  • Bracket Space: 1

Support

Download Manual

Manual DIO Series User Manual
Version Ver. 1.0
Update 2023-02-02 10:21:03
Size 1.5MB

Download Datasheet

Datasheet IPC-C4443I Datasheet EN

Download Guide

Guide Industrial Digital I/O Card Quick Installation Guide

Download Driver

Driver Windows IO Expansion Card Driver V1.3.2.0 (WHQL) - 2022031401
Version V1.3.2.0
Update 2022-03-15 13:47:31
Size 4.6MB
OS
Windows 11 64bit
Windows 10 32/64 bit
API Windows SDC API V1.0.4.0
Version Ver 1.0.4.0
Update 2022-06-28 10:01:32
Size 4.7MB
OS
Windows 11 64bit
Windows 10 32/64 bit
Driver Linux IO Expansion Card Driver V2.0.0.0
Version V2.0.0,.0
Update 2023-12-25 10:43:17
Size 5.9MB
OS
Linux Kernel 5.4

IPC-C4443I

Mini PCIe Industrial I/O Control Card
4-ch Isolated Digital Input
4-ch Isolated Digital Output
Board Level:
  • Suitable for Mini PCIe slot on PCI Express communication.
  • Designed to meet PCI Express Base Specification Revision 2.1.
  • With high reliable SUNIX QiuNiu Digital-I/O controller.
  • Plug-n-Play, I/O address and IRQ assigned by system.
  • Ultra low power consumption (<1.5W) design for green environment and industrial application.
  • High quality electronic components, low impedance and high stability ensure product quality and reliability.
  • Support Microsoft Windows 10/11 and Linux with C, C# and Python programming language sample code.
  • Capable of engaging with EdgeX device C SDK for EdgeX service development.
  • Certified by CE, FCC, RoHS, and Microsoft approvals.
  • With low profile bracket extension board to meet various of Edge PC chassis.
 
Digital I/O Communication:
  • Expands isolated four (4) digital input channels with features for all channels.
    • Support both NPN & PNP devices
    • Support both dry and wet contact connections
    • With digital filter for noise reduction
    • Built-in 32-bit counter for all digital in channels
  • Expands isolated four (4) NPN type digital output channels with initial value (Booting & Restart) protection.
  • Each channel built-in 2.5KV isolation protection for signal and power, allowing the input signals to be completely floated so as to prevent ground loops.
SUNIX IPC-C4443I, industrial isolated digital I/O Mini PCIe card, is designed for PC-based IoT Gateway or Edge Computer that enables data acquisition and I/O controls in industrial automation. This board built-in SUNIX Digital-I/O controller, QiuNiu, and also built with many of SUNIX advanced features and technologies. In addition, SUNIX provides API software and SDK library, allowing users to program under Windows 10/11 and Linux operating systems. The software package includes a dynamic library.dll, C, C# and Python programming language sample code, making it easier to develop application software. SUNIX IPC-C4443I board enriches digital I/O expandable capacity with cost-efficient design; it is the best digital I/O control solution for lite-industrial applications.

Introduction

SUNIX IPC-C4443I, industrial isolated digital I/O Mini PCIe card, is designed for PC-based IoT Gateway or Edge Computer that enables data acquisition and I/O controls in industrial automation. This board built-in SUNIX Digital-I/O controller, QiuNiu, and also built with many of SUNIX advanced features and technologies. In addition, SUNIX provides API software and SDK library, allowing users to program under Windows 10/11 and Linux operating systems. The software package includes a dynamic library.dll, C, C# and Python programming language sample code, making it easier to develop application software. SUNIX IPC-C4443I board enriches digital I/O expandable capacity with cost-efficient design; it is the best digital I/O control solution for lite-industrial applications.

Specifications

Board Communication

Interface Mini PCI Express
Controller SUNIX QiuNiu Digital-I/O controller
BUS PCI Express Gen2 x 1 (single lan)
IRQ & IO Assigned by System
Protection ±15KV IEC6000-4-2 Air Discharge
±8KV IEC61000-4-2 Contact Discharge

Digital Input Communication

Type NPN & PNP
Channel 4-channel
Dry Contact Logic Level 0: Open;
Logic Level 1: Close to GND
Wet Contact Logic Level 0: 0 to 3VDC;
Logic Level 1: 10 to 50VDC
Input Resistance 10KΩ
Isolation 2500 VDC
Frequency Input Range 2KHz max
Pin Define DI1~DI4, COM, GND
Counter 32-bit counter for all channel
Interrupt Mode Event trigger (Rising Edge, Falling Edge, Both modes) & polling for all channels
Digital Filter Digital filter for noise reduction
PCB Connector Terminal Block on extension board

Digital Output Communication

Type NPN
Channel 4-channel
Voltage Range 3.5 to 40VDC
Current 500mA per Channel
Isolation 2500 VDC
Pin Define DO1~DO4, PWR, GND
Initial Protection Load preset output value automatically during booting and restart
PCB Connector Terminal Block on extension board


Software Support

OS

Windows 10 (X86/X64) / 11, Linux

SDK Library: Supporting C, C++, C# and Python languages. 
C, C# and Python sample code available

Third Party Software support

Capable of engaging with EdgeX device C SDK for EdgeX service development.

Regulatory Approvals

Hardware

CE / FCC / VCCI / BSMI

Declaration

Green Product

RoHS, CRoHS, WEEE

Environment

Operation Temperature

-20 to 70°C (-4 to 158°F)

Operation Humidity

5 to 95% (non-condensing)

Storage Temperature

-20 to 70°C (-4 to 158°F)

Dimension

PCB Dimension

Mini PCIe card 50.95x30mm / Extension board 64 x 45 mm

Bracket

Low Profile 79.2mm

Bracket Space

1

 

Accessories

Including Accessories

Extension board w/ low profile bracket
  • Low Profile Bracket(on board) 79.2mm
DIO Terminal block
  • Part Number: 1PCP-TF51201M00001
DIO Ribbon Cable
  • Part Number: 1WRL-C014C22052000
  • Length: 15cm for Extension Board
DIO Standard Bracket
  • Standard 121 mm
  • Bracket Space: 1

Support

Download Manual

Manual DIO Series User Manual
Version Ver. 1.0
Update 2023-02-02 10:21:03
Size 1.5MB

Download Datasheet

Datasheet IPC-C4443I Datasheet EN

Download Guide

Guide Industrial Digital I/O Card Quick Installation Guide

Download Driver

Driver Windows IO Expansion Card Driver V1.3.2.0 (WHQL) - 2022031401
Version V1.3.2.0
Update 2022-03-15 13:47:31
Size 4.6MB
OS
Windows 11 64bit
Windows 10 32/64 bit
API Windows SDC API V1.0.4.0
Version Ver 1.0.4.0
Update 2022-06-28 10:01:32
Size 4.7MB
OS
Windows 11 64bit
Windows 10 32/64 bit
Driver Linux IO Expansion Card Driver V2.0.0.0
Version V2.0.0,.0
Update 2023-12-25 10:43:17
Size 5.9MB
OS
Linux Kernel 5.4
Back to top
返回頂部
返回頂部