EZR5231

4-ch Analog Input Ethernet IO Controller
  • 4-ch AI, Ethernet-based smart I/O.
  • Built-in with SUNIX High-Performance Ethernet-IO controller.
  • Built-in dual 10/100 Ethernet ports for Ethernet cascading capability.
  • IP setting not required, enabling convenient and quick deployment configuration.
  • Supports daisy chain network topology for flexible and quick I/O expansion.
  • Automatic device enumeration mechanism facilitates terminal device networking.
  • Hardware may be wall or rail (DIN) mounted.

Introduction

SUNIX EZR5231 utilizes SUNIX EAZInet networking technology to quickly expand four analog input signals via Ethernet, allowing users to conveniently implement automation, swiftly incorporate the Internet of Things into their businesses, and raise their competitiveness.
SUNIX EZR5231 does not require IP setting and supports full network topology, which substantially lightens the burden of network planning and management, shortens the hardware deployment process, and enables subsequent expansions to be executed more flexibly.
SUNIX EZR5231 is capable of automatic device enumeration, which allows the console terminal to quickly search for terminal devices, thus enabling plug-and-play functionality. This greatly improves the convenience of system development for users.

Specifications

Analog Input

Channels 4 channels
Voltage Range ±100 mV ±500 mV,
±1 V , ±5 V, ±10 V
0~100 mV, 0~500 mV,
0~1 V , 0~5 V, 0~10 V
Current Range ±20mA, 0~20mA
Sampling Rates 20 Samples/Second Total
Input Impedance 100MΩ: ±100mV, ±500mV, ±1V,0~100mV, 0~500mV, 0~1V
2.4MΩ: ±5V, ±10V,0~5V, 0~10V
120Ω:±20mA, 0~20mA
Resolution 16-bit
Accuracy ±0.1% FSR
Span Drift ±25 ppm/℃
Zero Drift ±6 μ V/℃
Input Voltage Protection Built-in TVS/ESD Protection

Power Requirements

Input Voltage 12 to 24 VDC
Power Consumption 1.6W@ 24 VDC
Connector 2 PIN Terminal Block

LAN

Ethernet 2-port 10/100 Mbps RJ45 ports
Protection 1.5 KV magnetic isolation
Protocols SUNIX EAZInet

Physical Characteristics

Dimensions 72.1 x 108 x 33.7 mm (2.83 x 4.25 x 1.32 in)
Weight 118 g
Mounting DIN rail or wall

Environmental Limits

Operation Temperature -25 to 70°C (-13 to 158°F)
Operation Humidity 5 to 95% RH(non-condensing)
Storage Temperature -30 to 75°C (-22 to 167°F)

Standards and Certifications

EMC EN 55032, EN 55035
EMI CISPR 32, FCC Part 15B Class B
EMS IEC 61000-4-2
ESD Contact: 4 kV; Air: 8 kV

Support

Download Manual

Manual DevicePort I/O EZR523X Quick Installation Guide

Download Datasheet

Datasheet EZR5231 Datasheet

Download Driver

Driver DevicePortAdvanced V4.0.0.0
Version Ver 4.0.0.0
Update 2020-09-17 10:48:15
Size 5.5MB
OS
Windows 10 32/64 bit
Windows 8.1 32/64 bit
Windows 8.0 32/64 bit
Windows 7 SP1 32/64 bit
Windows Server 2012 R2 64-bit
Windows Server 2012 64Bit
Windows Server 2008 R2 SP1 64bit
API DevicePort EZIO API v1.0.1.2 (for Driver v4.0.0.0)
Version Ver 1.0.1.2
Update 2020-09-17 10:53:24
Size 1.5MB
OS
Windows 10 32/64 bit
Windows 8.1 32/64 bit
Windows 8.0 32/64 bit
Windows 7 SP1 32/64 bit
Windows Server 2012 R2 64-bit
Windows Server 2012 64Bit
Windows Server 2008 R2 SP1 64bit
Driver DevicePortAdvanced V3.0.8.0
Version Ver 3.0.8.0
Update 2020-01-21 14:34:24
Size 7.3MB
OS
Windows 10 32/64 bit
Windows 8.1 32/64 bit
Windows 8.0 32/64 bit
Windows 7 SP1 32/64 bit
Windows Server 2012 R2 64-bit
Windows Server 2012 64Bit
Windows Server 2008 R2 SP1 64bit
API DevicePort IO API v2.6.0.1 (for Driver v3.0.8.0)
Version Ver 2.6.0.1
Update 2019-12-04 12:09:39
Size 2.6MB
OS
Windows 10 32/64 bit
Windows 8.1 32/64 bit
Windows 8.0 32/64 bit
Windows 7 SP1 32/64 bit
Windows Vista SP2 32/64 bit

EZR5231

4-ch Analog Input Ethernet IO Controller
  • 4-ch AI, Ethernet-based smart I/O.
  • Built-in with SUNIX High-Performance Ethernet-IO controller.
  • Built-in dual 10/100 Ethernet ports for Ethernet cascading capability.
  • IP setting not required, enabling convenient and quick deployment configuration.
  • Supports daisy chain network topology for flexible and quick I/O expansion.
  • Automatic device enumeration mechanism facilitates terminal device networking.
  • Hardware may be wall or rail (DIN) mounted.

Introduction

SUNIX EZR5231 utilizes SUNIX EAZInet networking technology to quickly expand four analog input signals via Ethernet, allowing users to conveniently implement automation, swiftly incorporate the Internet of Things into their businesses, and raise their competitiveness.
SUNIX EZR5231 does not require IP setting and supports full network topology, which substantially lightens the burden of network planning and management, shortens the hardware deployment process, and enables subsequent expansions to be executed more flexibly.
SUNIX EZR5231 is capable of automatic device enumeration, which allows the console terminal to quickly search for terminal devices, thus enabling plug-and-play functionality. This greatly improves the convenience of system development for users.

Specifications

Analog Input

Channels 4 channels
Voltage Range ±100 mV ±500 mV,
±1 V , ±5 V, ±10 V
0~100 mV, 0~500 mV,
0~1 V , 0~5 V, 0~10 V
Current Range ±20mA, 0~20mA
Sampling Rates 20 Samples/Second Total
Input Impedance 100MΩ: ±100mV, ±500mV, ±1V,0~100mV, 0~500mV, 0~1V
2.4MΩ: ±5V, ±10V,0~5V, 0~10V
120Ω:±20mA, 0~20mA
Resolution 16-bit
Accuracy ±0.1% FSR
Span Drift ±25 ppm/℃
Zero Drift ±6 μ V/℃
Input Voltage Protection Built-in TVS/ESD Protection

Power Requirements

Input Voltage 12 to 24 VDC
Power Consumption 1.6W@ 24 VDC
Connector 2 PIN Terminal Block

LAN

Ethernet 2-port 10/100 Mbps RJ45 ports
Protection 1.5 KV magnetic isolation
Protocols SUNIX EAZInet

Physical Characteristics

Dimensions 72.1 x 108 x 33.7 mm (2.83 x 4.25 x 1.32 in)
Weight 118 g
Mounting DIN rail or wall

Environmental Limits

Operation Temperature -25 to 70°C (-13 to 158°F)
Operation Humidity 5 to 95% RH(non-condensing)
Storage Temperature -30 to 75°C (-22 to 167°F)

Standards and Certifications

EMC EN 55032, EN 55035
EMI CISPR 32, FCC Part 15B Class B
EMS IEC 61000-4-2
ESD Contact: 4 kV; Air: 8 kV

Support

Download Manual

Manual DevicePort I/O EZR523X Quick Installation Guide

Download Datasheet

Datasheet EZR5231 Datasheet

Download Driver

Driver DevicePortAdvanced V4.0.0.0
Version Ver 4.0.0.0
Update 2020-09-17 10:48:15
Size 5.5MB
OS
Windows 10 32/64 bit
Windows 8.1 32/64 bit
Windows 8.0 32/64 bit
Windows 7 SP1 32/64 bit
Windows Server 2012 R2 64-bit
Windows Server 2012 64Bit
Windows Server 2008 R2 SP1 64bit
API DevicePort EZIO API v1.0.1.2 (for Driver v4.0.0.0)
Version Ver 1.0.1.2
Update 2020-09-17 10:53:24
Size 1.5MB
OS
Windows 10 32/64 bit
Windows 8.1 32/64 bit
Windows 8.0 32/64 bit
Windows 7 SP1 32/64 bit
Windows Server 2012 R2 64-bit
Windows Server 2012 64Bit
Windows Server 2008 R2 SP1 64bit
Driver DevicePortAdvanced V3.0.8.0
Version Ver 3.0.8.0
Update 2020-01-21 14:34:24
Size 7.3MB
OS
Windows 10 32/64 bit
Windows 8.1 32/64 bit
Windows 8.0 32/64 bit
Windows 7 SP1 32/64 bit
Windows Server 2012 R2 64-bit
Windows Server 2012 64Bit
Windows Server 2008 R2 SP1 64bit
API DevicePort IO API v2.6.0.1 (for Driver v3.0.8.0)
Version Ver 2.6.0.1
Update 2019-12-04 12:09:39
Size 2.6MB
OS
Windows 10 32/64 bit
Windows 8.1 32/64 bit
Windows 8.0 32/64 bit
Windows 7 SP1 32/64 bit
Windows Vista SP2 32/64 bit

EZR5231

4-ch Analog Input Ethernet IO Controller
  • 4-ch AI, Ethernet-based smart I/O.
  • Built-in with SUNIX High-Performance Ethernet-IO controller.
  • Built-in dual 10/100 Ethernet ports for Ethernet cascading capability.
  • IP setting not required, enabling convenient and quick deployment configuration.
  • Supports daisy chain network topology for flexible and quick I/O expansion.
  • Automatic device enumeration mechanism facilitates terminal device networking.
  • Hardware may be wall or rail (DIN) mounted.

Introduction

SUNIX EZR5231 utilizes SUNIX EAZInet networking technology to quickly expand four analog input signals via Ethernet, allowing users to conveniently implement automation, swiftly incorporate the Internet of Things into their businesses, and raise their competitiveness.
SUNIX EZR5231 does not require IP setting and supports full network topology, which substantially lightens the burden of network planning and management, shortens the hardware deployment process, and enables subsequent expansions to be executed more flexibly.
SUNIX EZR5231 is capable of automatic device enumeration, which allows the console terminal to quickly search for terminal devices, thus enabling plug-and-play functionality. This greatly improves the convenience of system development for users.

Specifications

Analog Input

Channels 4 channels
Voltage Range ±100 mV ±500 mV,
±1 V , ±5 V, ±10 V
0~100 mV, 0~500 mV,
0~1 V , 0~5 V, 0~10 V
Current Range ±20mA, 0~20mA
Sampling Rates 20 Samples/Second Total
Input Impedance 100MΩ: ±100mV, ±500mV, ±1V,0~100mV, 0~500mV, 0~1V
2.4MΩ: ±5V, ±10V,0~5V, 0~10V
120Ω:±20mA, 0~20mA
Resolution 16-bit
Accuracy ±0.1% FSR
Span Drift ±25 ppm/℃
Zero Drift ±6 μ V/℃
Input Voltage Protection Built-in TVS/ESD Protection

Power Requirements

Input Voltage 12 to 24 VDC
Power Consumption 1.6W@ 24 VDC
Connector 2 PIN Terminal Block

LAN

Ethernet 2-port 10/100 Mbps RJ45 ports
Protection 1.5 KV magnetic isolation
Protocols SUNIX EAZInet

Physical Characteristics

Dimensions 72.1 x 108 x 33.7 mm (2.83 x 4.25 x 1.32 in)
Weight 118 g
Mounting DIN rail or wall

Environmental Limits

Operation Temperature -25 to 70°C (-13 to 158°F)
Operation Humidity 5 to 95% RH(non-condensing)
Storage Temperature -30 to 75°C (-22 to 167°F)

Standards and Certifications

EMC EN 55032, EN 55035
EMI CISPR 32, FCC Part 15B Class B
EMS IEC 61000-4-2
ESD Contact: 4 kV; Air: 8 kV

Support

Download Manual

Manual DevicePort I/O EZR523X Quick Installation Guide

Download Datasheet

Datasheet EZR5231 Datasheet

Download Driver

Driver DevicePortAdvanced V4.0.0.0
Version Ver 4.0.0.0
Update 2020-09-17 10:48:15
Size 5.5MB
OS
Windows 10 32/64 bit
Windows 8.1 32/64 bit
Windows 8.0 32/64 bit
Windows 7 SP1 32/64 bit
Windows Server 2012 R2 64-bit
Windows Server 2012 64Bit
Windows Server 2008 R2 SP1 64bit
API DevicePort EZIO API v1.0.1.2 (for Driver v4.0.0.0)
Version Ver 1.0.1.2
Update 2020-09-17 10:53:24
Size 1.5MB
OS
Windows 10 32/64 bit
Windows 8.1 32/64 bit
Windows 8.0 32/64 bit
Windows 7 SP1 32/64 bit
Windows Server 2012 R2 64-bit
Windows Server 2012 64Bit
Windows Server 2008 R2 SP1 64bit
Driver DevicePortAdvanced V3.0.8.0
Version Ver 3.0.8.0
Update 2020-01-21 14:34:24
Size 7.3MB
OS
Windows 10 32/64 bit
Windows 8.1 32/64 bit
Windows 8.0 32/64 bit
Windows 7 SP1 32/64 bit
Windows Server 2012 R2 64-bit
Windows Server 2012 64Bit
Windows Server 2008 R2 SP1 64bit
API DevicePort IO API v2.6.0.1 (for Driver v3.0.8.0)
Version Ver 2.6.0.1
Update 2019-12-04 12:09:39
Size 2.6MB
OS
Windows 10 32/64 bit
Windows 8.1 32/64 bit
Windows 8.0 32/64 bit
Windows 7 SP1 32/64 bit
Windows Vista SP2 32/64 bit

EZR5231

4-ch Analog Input Ethernet IO Controller
  • 4-ch AI, Ethernet-based smart I/O.
  • Built-in with SUNIX High-Performance Ethernet-IO controller.
  • Built-in dual 10/100 Ethernet ports for Ethernet cascading capability.
  • IP setting not required, enabling convenient and quick deployment configuration.
  • Supports daisy chain network topology for flexible and quick I/O expansion.
  • Automatic device enumeration mechanism facilitates terminal device networking.
  • Hardware may be wall or rail (DIN) mounted.
SUNIX EZR5231 utilizes SUNIX EAZInet networking technology to quickly expand four analog input signals via Ethernet, allowing users to conveniently implement automation, swiftly incorporate the Internet of Things into their businesses, and raise their competitiveness.
SUNIX EZR5231 does not require IP setting and supports full network topology, which substantially lightens the burden of network planning and management, shortens the hardware deployment process, and enables subsequent expansions to be executed more flexibly.
SUNIX EZR5231 is capable of automatic device enumeration, which allows the console terminal to quickly search for terminal devices, thus enabling plug-and-play functionality. This greatly improves the convenience of system development for users.

Introduction

SUNIX EZR5231 utilizes SUNIX EAZInet networking technology to quickly expand four analog input signals via Ethernet, allowing users to conveniently implement automation, swiftly incorporate the Internet of Things into their businesses, and raise their competitiveness.
SUNIX EZR5231 does not require IP setting and supports full network topology, which substantially lightens the burden of network planning and management, shortens the hardware deployment process, and enables subsequent expansions to be executed more flexibly.
SUNIX EZR5231 is capable of automatic device enumeration, which allows the console terminal to quickly search for terminal devices, thus enabling plug-and-play functionality. This greatly improves the convenience of system development for users.

Specifications

Analog Input

Channels 4 channels
Voltage Range ±100 mV ±500 mV,
±1 V , ±5 V, ±10 V
0~100 mV, 0~500 mV,
0~1 V , 0~5 V, 0~10 V
Current Range ±20mA, 0~20mA
Sampling Rates 20 Samples/Second Total
Input Impedance 100MΩ: ±100mV, ±500mV, ±1V,0~100mV, 0~500mV, 0~1V
2.4MΩ: ±5V, ±10V,0~5V, 0~10V
120Ω:±20mA, 0~20mA
Resolution 16-bit
Accuracy ±0.1% FSR
Span Drift ±25 ppm/℃
Zero Drift ±6 μ V/℃
Input Voltage Protection Built-in TVS/ESD Protection

Power Requirements

Input Voltage 12 to 24 VDC
Power Consumption 1.6W@ 24 VDC
Connector 2 PIN Terminal Block

LAN

Ethernet 2-port 10/100 Mbps RJ45 ports
Protection 1.5 KV magnetic isolation
Protocols SUNIX EAZInet

Physical Characteristics

Dimensions 72.1 x 108 x 33.7 mm (2.83 x 4.25 x 1.32 in)
Weight 118 g
Mounting DIN rail or wall

Environmental Limits

Operation Temperature -25 to 70°C (-13 to 158°F)
Operation Humidity 5 to 95% RH(non-condensing)
Storage Temperature -30 to 75°C (-22 to 167°F)

Standards and Certifications

EMC EN 55032, EN 55035
EMI CISPR 32, FCC Part 15B Class B
EMS IEC 61000-4-2
ESD Contact: 4 kV; Air: 8 kV

Support

Download Manual

Manual DevicePort I/O EZR523X Quick Installation Guide

Download Datasheet

Datasheet EZR5231 Datasheet

Download Driver

Driver DevicePortAdvanced V4.0.0.0
Version Ver 4.0.0.0
Update 2020-09-17 10:48:15
Size 5.5MB
OS
Windows 10 32/64 bit
Windows 8.1 32/64 bit
Windows 8.0 32/64 bit
Windows 7 SP1 32/64 bit
Windows Server 2012 R2 64-bit
Windows Server 2012 64Bit
Windows Server 2008 R2 SP1 64bit
API DevicePort EZIO API v1.0.1.2 (for Driver v4.0.0.0)
Version Ver 1.0.1.2
Update 2020-09-17 10:53:24
Size 1.5MB
OS
Windows 10 32/64 bit
Windows 8.1 32/64 bit
Windows 8.0 32/64 bit
Windows 7 SP1 32/64 bit
Windows Server 2012 R2 64-bit
Windows Server 2012 64Bit
Windows Server 2008 R2 SP1 64bit
Driver DevicePortAdvanced V3.0.8.0
Version Ver 3.0.8.0
Update 2020-01-21 14:34:24
Size 7.3MB
OS
Windows 10 32/64 bit
Windows 8.1 32/64 bit
Windows 8.0 32/64 bit
Windows 7 SP1 32/64 bit
Windows Server 2012 R2 64-bit
Windows Server 2012 64Bit
Windows Server 2008 R2 SP1 64bit
API DevicePort IO API v2.6.0.1 (for Driver v3.0.8.0)
Version Ver 2.6.0.1
Update 2019-12-04 12:09:39
Size 2.6MB
OS
Windows 10 32/64 bit
Windows 8.1 32/64 bit
Windows 8.0 32/64 bit
Windows 7 SP1 32/64 bit
Windows Vista SP2 32/64 bit