DPAD02HTP

Industrial Serial DevicePort Ethernet to 2-port RS-422/485 Serial
  • Expands 2 independent RS-422/485 serial port over Ethernet networking
  • Built-in SUNIX DevicePort DPL2000Q High-Performance Ethernet-UART controller
  • SUNIX DevicePort proprietary Ethernet I/O Redirection Technology
  •  - Serial communication with real time data transmit and receive
     - Physical COM port accessible via Windows Device Manager
     - Up to 255 COM ports can be setup on a windows system simultaneously

  • Accessing Legacy COM port by using existing software and application
  • Flexible port configuration with DevicePort on/off-line Smart COM deployment
  •  - Keeps physical COM port in system when DevicePort under off-line mode
     - Serial signal staging until DevicePort recovery back to on-line mode

  • Built-in single 10/100 Ethernet ports for Ethernet cascading capability
  • Support Wall Mounting & DIN-rail Mounting Installation.

Introduction

DPAD02HTP allows users to expand 2 RS-422/485 port over Ethernet connection, and it works on any windows based desktop, thin client, laptop, All-in-one, and tablet PC computers. With SUNIX DPL2000Q High-Performance Ethernet-UART controller and exclusive I/O Redirection Technology, DevicePort creates physical COM ports that support real time data communication, Smart COM on/off-line deployment, and Ethernet-COM port hot-plug capability; user can expand RS-422/485 COM port easily without complex software configuration. SUNIX DevicePort improves solution deployment efficiency to achieve greater reliability in commercial and industrial automation applications.

Specifications

Serial Communication

Interface RS-422/485
Controller SUNIX DPL2000Q
BUS Ethernet
No. of Port 2-port
FIFO 1Kbyte Hardware / per port
Baud rate 50 bps ~921.6 Kbps
Stop bit 1, 1.5, 2
Parity even, odd, none, mark, space
Flow Control Xon/Xoff (software control) RTS/CTS (hardware control)
Connector Terminal block
Signal RS422: TxD+, TxD-, RxD+, RxD-, GND
RS485: Data+, Data-, GND
Protection ±8KV ESD IEC 61000-4-2 air discharge
±4KV ESD IEC 61000-4-2 contact discharge

Software

Driver support Microsoft Client: Windows Vista / 7 / 8.x / 10 (x86/x64)
Microsoft Servers: Windows Server 2008 / 2012R2 (x64)

Ethernet Communication

Number of Ports Dual Ethernet ports
Speed 10/100 Mbps, auto MDI/MDIX
Connector RJ45
Electromagnetic shielding protection Built-in 1.5K

Power Requirements

Input Voltage 12~24VDC
Power Consumption 1.2W@24VDC
Connector Terminal connector

Certifications

Hardware CE, FCC, VCCI, BSMI

Environment

Operation Temperature -25 to 70°C (-13 to 158°F)
Operation Humidity 5 to 95% RH  (non-condensing)
Storage Temperature -30 to 75°C (-22 to 167°F)

Physical Characteristics

Housing ABS, PC
Weight 118 g
Dimensions 72.1 x 108.78 x 33.7(mm) / 2.84 x 4.28 x 1.3(inch)

Support

Download Datasheet

Datasheet DPAD02HTP Datasheet

Download Guide

Guide DevicePort Industrial Mode Quick Installation Guide

Download Driver

Driver DevicePortAdvanced V4.0.0.0
Version Ver 4.0.0.0
Update 2020-09-17 10:48:15
Size 5.5MB
OS
Windows 10 32/64 bit
Windows 8.1 32/64 bit
Windows 8.0 32/64 bit
Windows 7 SP1 32/64 bit
Windows Server 2012 R2 64-bit
Windows Server 2012 64Bit
Windows Server 2008 R2 SP1 64bit
API DevicePort EZIO API v1.0.1.2 (for Driver v4.0.0.0)
Version Ver 1.0.1.2
Update 2020-09-17 10:53:24
Size 1.5MB
OS
Windows 10 32/64 bit
Windows 8.1 32/64 bit
Windows 8.0 32/64 bit
Windows 7 SP1 32/64 bit
Windows Server 2012 R2 64-bit
Windows Server 2012 64Bit
Windows Server 2008 R2 SP1 64bit
Driver DevicePortAdvanced V3.0.8.0
Version Ver 3.0.8.0
Update 2020-01-21 14:34:24
Size 7.3MB
OS
Windows 10 32/64 bit
Windows 8.1 32/64 bit
Windows 8.0 32/64 bit
Windows 7 SP1 32/64 bit
Windows Server 2012 R2 64-bit
Windows Server 2012 64Bit
Windows Server 2008 R2 SP1 64bit
Driver Linux TTY Driver Ver 1.0.15.0
Version Ver 1.0.15.0
Update 2019-09-16 15:21:59
Size 2MB
OS
CentOS7.0
Ubuntu 11.10
Ubuntu 12.04
Ubuntu 13.10
Ubuntu 14.04
Ubuntu 14.10
Ubuntu 15.04
Ubuntu 15.10
Ubuntu 16.04

DPAD02HTP

Industrial Serial DevicePort Ethernet to 2-port RS-422/485 Serial
  • Expands 2 independent RS-422/485 serial port over Ethernet networking
  • Built-in SUNIX DevicePort DPL2000Q High-Performance Ethernet-UART controller
  • SUNIX DevicePort proprietary Ethernet I/O Redirection Technology
  •  - Serial communication with real time data transmit and receive
     - Physical COM port accessible via Windows Device Manager
     - Up to 255 COM ports can be setup on a windows system simultaneously

  • Accessing Legacy COM port by using existing software and application
  • Flexible port configuration with DevicePort on/off-line Smart COM deployment
  •  - Keeps physical COM port in system when DevicePort under off-line mode
     - Serial signal staging until DevicePort recovery back to on-line mode

  • Built-in single 10/100 Ethernet ports for Ethernet cascading capability
  • Support Wall Mounting & DIN-rail Mounting Installation.

Introduction

DPAD02HTP allows users to expand 2 RS-422/485 port over Ethernet connection, and it works on any windows based desktop, thin client, laptop, All-in-one, and tablet PC computers. With SUNIX DPL2000Q High-Performance Ethernet-UART controller and exclusive I/O Redirection Technology, DevicePort creates physical COM ports that support real time data communication, Smart COM on/off-line deployment, and Ethernet-COM port hot-plug capability; user can expand RS-422/485 COM port easily without complex software configuration. SUNIX DevicePort improves solution deployment efficiency to achieve greater reliability in commercial and industrial automation applications.

Specifications

Serial Communication

Interface RS-422/485
Controller SUNIX DPL2000Q
BUS Ethernet
No. of Port 2-port
FIFO 1Kbyte Hardware / per port
Baud rate 50 bps ~921.6 Kbps
Stop bit 1, 1.5, 2
Parity even, odd, none, mark, space
Flow Control Xon/Xoff (software control) RTS/CTS (hardware control)
Connector Terminal block
Signal RS422: TxD+, TxD-, RxD+, RxD-, GND
RS485: Data+, Data-, GND
Protection ±8KV ESD IEC 61000-4-2 air discharge
±4KV ESD IEC 61000-4-2 contact discharge

Software

Driver support Microsoft Client: Windows Vista / 7 / 8.x / 10 (x86/x64)
Microsoft Servers: Windows Server 2008 / 2012R2 (x64)

Ethernet Communication

Number of Ports Dual Ethernet ports
Speed 10/100 Mbps, auto MDI/MDIX
Connector RJ45
Electromagnetic shielding protection Built-in 1.5K

Power Requirements

Input Voltage 12~24VDC
Power Consumption 1.2W@24VDC
Connector Terminal connector

Certifications

Hardware CE, FCC, VCCI, BSMI

Environment

Operation Temperature -25 to 70°C (-13 to 158°F)
Operation Humidity 5 to 95% RH  (non-condensing)
Storage Temperature -30 to 75°C (-22 to 167°F)

Physical Characteristics

Housing ABS, PC
Weight 118 g
Dimensions 72.1 x 108.78 x 33.7(mm) / 2.84 x 4.28 x 1.3(inch)

Support

Download Datasheet

Datasheet DPAD02HTP Datasheet

Download Guide

Guide DevicePort Industrial Mode Quick Installation Guide

Download Driver

Driver DevicePortAdvanced V4.0.0.0
Version Ver 4.0.0.0
Update 2020-09-17 10:48:15
Size 5.5MB
OS
Windows 10 32/64 bit
Windows 8.1 32/64 bit
Windows 8.0 32/64 bit
Windows 7 SP1 32/64 bit
Windows Server 2012 R2 64-bit
Windows Server 2012 64Bit
Windows Server 2008 R2 SP1 64bit
API DevicePort EZIO API v1.0.1.2 (for Driver v4.0.0.0)
Version Ver 1.0.1.2
Update 2020-09-17 10:53:24
Size 1.5MB
OS
Windows 10 32/64 bit
Windows 8.1 32/64 bit
Windows 8.0 32/64 bit
Windows 7 SP1 32/64 bit
Windows Server 2012 R2 64-bit
Windows Server 2012 64Bit
Windows Server 2008 R2 SP1 64bit
Driver DevicePortAdvanced V3.0.8.0
Version Ver 3.0.8.0
Update 2020-01-21 14:34:24
Size 7.3MB
OS
Windows 10 32/64 bit
Windows 8.1 32/64 bit
Windows 8.0 32/64 bit
Windows 7 SP1 32/64 bit
Windows Server 2012 R2 64-bit
Windows Server 2012 64Bit
Windows Server 2008 R2 SP1 64bit
Driver Linux TTY Driver Ver 1.0.15.0
Version Ver 1.0.15.0
Update 2019-09-16 15:21:59
Size 2MB
OS
CentOS7.0
Ubuntu 11.10
Ubuntu 12.04
Ubuntu 13.10
Ubuntu 14.04
Ubuntu 14.10
Ubuntu 15.04
Ubuntu 15.10
Ubuntu 16.04

DPAD02HTP

Industrial Serial DevicePort Ethernet to 2-port RS-422/485 Serial
  • Expands 2 independent RS-422/485 serial port over Ethernet networking
  • Built-in SUNIX DevicePort DPL2000Q High-Performance Ethernet-UART controller
  • SUNIX DevicePort proprietary Ethernet I/O Redirection Technology
  •  - Serial communication with real time data transmit and receive
     - Physical COM port accessible via Windows Device Manager
     - Up to 255 COM ports can be setup on a windows system simultaneously

  • Accessing Legacy COM port by using existing software and application
  • Flexible port configuration with DevicePort on/off-line Smart COM deployment
  •  - Keeps physical COM port in system when DevicePort under off-line mode
     - Serial signal staging until DevicePort recovery back to on-line mode

  • Built-in single 10/100 Ethernet ports for Ethernet cascading capability
  • Support Wall Mounting & DIN-rail Mounting Installation.

Introduction

DPAD02HTP allows users to expand 2 RS-422/485 port over Ethernet connection, and it works on any windows based desktop, thin client, laptop, All-in-one, and tablet PC computers. With SUNIX DPL2000Q High-Performance Ethernet-UART controller and exclusive I/O Redirection Technology, DevicePort creates physical COM ports that support real time data communication, Smart COM on/off-line deployment, and Ethernet-COM port hot-plug capability; user can expand RS-422/485 COM port easily without complex software configuration. SUNIX DevicePort improves solution deployment efficiency to achieve greater reliability in commercial and industrial automation applications.

Specifications

Serial Communication

Interface RS-422/485
Controller SUNIX DPL2000Q
BUS Ethernet
No. of Port 2-port
FIFO 1Kbyte Hardware / per port
Baud rate 50 bps ~921.6 Kbps
Stop bit 1, 1.5, 2
Parity even, odd, none, mark, space
Flow Control Xon/Xoff (software control) RTS/CTS (hardware control)
Connector Terminal block
Signal RS422: TxD+, TxD-, RxD+, RxD-, GND
RS485: Data+, Data-, GND
Protection ±8KV ESD IEC 61000-4-2 air discharge
±4KV ESD IEC 61000-4-2 contact discharge

Software

Driver support Microsoft Client: Windows Vista / 7 / 8.x / 10 (x86/x64)
Microsoft Servers: Windows Server 2008 / 2012R2 (x64)

Ethernet Communication

Number of Ports Dual Ethernet ports
Speed 10/100 Mbps, auto MDI/MDIX
Connector RJ45
Electromagnetic shielding protection Built-in 1.5K

Power Requirements

Input Voltage 12~24VDC
Power Consumption 1.2W@24VDC
Connector Terminal connector

Certifications

Hardware CE, FCC, VCCI, BSMI

Environment

Operation Temperature -25 to 70°C (-13 to 158°F)
Operation Humidity 5 to 95% RH  (non-condensing)
Storage Temperature -30 to 75°C (-22 to 167°F)

Physical Characteristics

Housing ABS, PC
Weight 118 g
Dimensions 72.1 x 108.78 x 33.7(mm) / 2.84 x 4.28 x 1.3(inch)

Support

Download Datasheet

Datasheet DPAD02HTP Datasheet

Download Guide

Guide DevicePort Industrial Mode Quick Installation Guide

Download Driver

Driver DevicePortAdvanced V4.0.0.0
Version Ver 4.0.0.0
Update 2020-09-17 10:48:15
Size 5.5MB
OS
Windows 10 32/64 bit
Windows 8.1 32/64 bit
Windows 8.0 32/64 bit
Windows 7 SP1 32/64 bit
Windows Server 2012 R2 64-bit
Windows Server 2012 64Bit
Windows Server 2008 R2 SP1 64bit
API DevicePort EZIO API v1.0.1.2 (for Driver v4.0.0.0)
Version Ver 1.0.1.2
Update 2020-09-17 10:53:24
Size 1.5MB
OS
Windows 10 32/64 bit
Windows 8.1 32/64 bit
Windows 8.0 32/64 bit
Windows 7 SP1 32/64 bit
Windows Server 2012 R2 64-bit
Windows Server 2012 64Bit
Windows Server 2008 R2 SP1 64bit
Driver DevicePortAdvanced V3.0.8.0
Version Ver 3.0.8.0
Update 2020-01-21 14:34:24
Size 7.3MB
OS
Windows 10 32/64 bit
Windows 8.1 32/64 bit
Windows 8.0 32/64 bit
Windows 7 SP1 32/64 bit
Windows Server 2012 R2 64-bit
Windows Server 2012 64Bit
Windows Server 2008 R2 SP1 64bit
Driver Linux TTY Driver Ver 1.0.15.0
Version Ver 1.0.15.0
Update 2019-09-16 15:21:59
Size 2MB
OS
CentOS7.0
Ubuntu 11.10
Ubuntu 12.04
Ubuntu 13.10
Ubuntu 14.04
Ubuntu 14.10
Ubuntu 15.04
Ubuntu 15.10
Ubuntu 16.04

DPAD02HTP

Industrial Serial DevicePort Ethernet to 2-port RS-422/485 Serial
  • Expands 2 independent RS-422/485 serial port over Ethernet networking
  • Built-in SUNIX DevicePort DPL2000Q High-Performance Ethernet-UART controller
  • SUNIX DevicePort proprietary Ethernet I/O Redirection Technology
  •  - Serial communication with real time data transmit and receive
     - Physical COM port accessible via Windows Device Manager
     - Up to 255 COM ports can be setup on a windows system simultaneously

  • Accessing Legacy COM port by using existing software and application
  • Flexible port configuration with DevicePort on/off-line Smart COM deployment
  •  - Keeps physical COM port in system when DevicePort under off-line mode
     - Serial signal staging until DevicePort recovery back to on-line mode

  • Built-in single 10/100 Ethernet ports for Ethernet cascading capability
  • Support Wall Mounting & DIN-rail Mounting Installation.
DPAD02HTP allows users to expand 2 RS-422/485 port over Ethernet connection, and it works on any windows based desktop, thin client, laptop, All-in-one, and tablet PC computers. With SUNIX DPL2000Q High-Performance Ethernet-UART controller and exclusive I/O Redirection Technology, DevicePort creates physical COM ports that support real time data communication, Smart COM on/off-line deployment, and Ethernet-COM port hot-plug capability; user can expand RS-422/485 COM port easily without complex software configuration. SUNIX DevicePort improves solution deployment efficiency to achieve greater reliability in commercial and industrial automation applications.

Introduction

DPAD02HTP allows users to expand 2 RS-422/485 port over Ethernet connection, and it works on any windows based desktop, thin client, laptop, All-in-one, and tablet PC computers. With SUNIX DPL2000Q High-Performance Ethernet-UART controller and exclusive I/O Redirection Technology, DevicePort creates physical COM ports that support real time data communication, Smart COM on/off-line deployment, and Ethernet-COM port hot-plug capability; user can expand RS-422/485 COM port easily without complex software configuration. SUNIX DevicePort improves solution deployment efficiency to achieve greater reliability in commercial and industrial automation applications.

Specifications

Serial Communication

Interface RS-422/485
Controller SUNIX DPL2000Q
BUS Ethernet
No. of Port 2-port
FIFO 1Kbyte Hardware / per port
Baud rate 50 bps ~921.6 Kbps
Stop bit 1, 1.5, 2
Parity even, odd, none, mark, space
Flow Control Xon/Xoff (software control) RTS/CTS (hardware control)
Connector Terminal block
Signal RS422: TxD+, TxD-, RxD+, RxD-, GND
RS485: Data+, Data-, GND
Protection ±8KV ESD IEC 61000-4-2 air discharge
±4KV ESD IEC 61000-4-2 contact discharge

Software

Driver support Microsoft Client: Windows Vista / 7 / 8.x / 10 (x86/x64)
Microsoft Servers: Windows Server 2008 / 2012R2 (x64)

Ethernet Communication

Number of Ports Dual Ethernet ports
Speed 10/100 Mbps, auto MDI/MDIX
Connector RJ45
Electromagnetic shielding protection Built-in 1.5K

Power Requirements

Input Voltage 12~24VDC
Power Consumption 1.2W@24VDC
Connector Terminal connector

Certifications

Hardware CE, FCC, VCCI, BSMI

Environment

Operation Temperature -25 to 70°C (-13 to 158°F)
Operation Humidity 5 to 95% RH  (non-condensing)
Storage Temperature -30 to 75°C (-22 to 167°F)

Physical Characteristics

Housing ABS, PC
Weight 118 g
Dimensions 72.1 x 108.78 x 33.7(mm) / 2.84 x 4.28 x 1.3(inch)

Support

Download Datasheet

Datasheet DPAD02HTP Datasheet

Download Guide

Guide DevicePort Industrial Mode Quick Installation Guide

Download Driver

Driver DevicePortAdvanced V4.0.0.0
Version Ver 4.0.0.0
Update 2020-09-17 10:48:15
Size 5.5MB
OS
Windows 10 32/64 bit
Windows 8.1 32/64 bit
Windows 8.0 32/64 bit
Windows 7 SP1 32/64 bit
Windows Server 2012 R2 64-bit
Windows Server 2012 64Bit
Windows Server 2008 R2 SP1 64bit
API DevicePort EZIO API v1.0.1.2 (for Driver v4.0.0.0)
Version Ver 1.0.1.2
Update 2020-09-17 10:53:24
Size 1.5MB
OS
Windows 10 32/64 bit
Windows 8.1 32/64 bit
Windows 8.0 32/64 bit
Windows 7 SP1 32/64 bit
Windows Server 2012 R2 64-bit
Windows Server 2012 64Bit
Windows Server 2008 R2 SP1 64bit
Driver DevicePortAdvanced V3.0.8.0
Version Ver 3.0.8.0
Update 2020-01-21 14:34:24
Size 7.3MB
OS
Windows 10 32/64 bit
Windows 8.1 32/64 bit
Windows 8.0 32/64 bit
Windows 7 SP1 32/64 bit
Windows Server 2012 R2 64-bit
Windows Server 2012 64Bit
Windows Server 2008 R2 SP1 64bit
Driver Linux TTY Driver Ver 1.0.15.0
Version Ver 1.0.15.0
Update 2019-09-16 15:21:59
Size 2MB
OS
CentOS7.0
Ubuntu 11.10
Ubuntu 12.04
Ubuntu 13.10
Ubuntu 14.04
Ubuntu 14.10
Ubuntu 15.04
Ubuntu 15.10
Ubuntu 16.04