Simplify Remote Management of HDMI Switches with DevicePort’s Easy to Use Features
This customer needs to manage 32 HDMI switches from a central station to achieve dramatic savings on overhead costs. This complex system is easy to accomplish thanks to the SUNIX Deviceport’s fast installation and simple maintenance.
The Challenges
A traditional, computer-based setup requires large amounts of hardware and a significant investment. And because RS-232 serial interface cables have length limitations, this whole system of computers will need to be housed in close proximity to the 32 HDMI switches— this makes for a very costly and complicated cable setup.
If this customer did invest in a computer-based management system using 32 COM ports they would inevitably encounter crippling CPU performance issues, rendering their costly system unreliable at best. Not to mention that, after each system failure, troubleshooting and repairs would be very expensive and time consuming.
The DevicePort Solution
Remotely Extended COM Ports via DevicePort’s Network Solutions–
Greatly Reduce Hardware, Deployment, and Management Costs
Quick Installation, Plug-N-Play, Hot-Swap Support –
Significantly Improve Management Efficiency
Should the controlling PC need replacement, simply install the DevicePort software onto an additional computer and instantly swap out the faulty PC. As long as all the RJ-45 and COM ports are still connected, the HDMI switches will be back online immediately, without requiring a complex re-installation process.
A Complicated and Inefficient Setup:
•This setup requires multiple PCs and an extremely complicated wiring setup
The Easy, Simple, and Effective DevicePort Solution:
•This setup requires just one host computer to control the entire remote management system
Additional DevicePort Advantages
- Fast and easy installation
- Even those without networking management experience can easily perform installation or maintenance
- Easily expanding ports use local area networks to significantly reduce system footprints
- Real-Time data transmitting (Real COM) without complicated IP setup
- COM Port Auto-Mapping
- Supports Plug-N-Play
- Compatible with existing software
- Provides power via Serial ports with SUNIX’s Powered COM feature (devices receive power via serial ports, bypassing the need for external power adapters)
- Simple and easy Maintenance
- Greatly reduced downtime during maintenance; swap and replace components in seconds
- With Hot-Swap support there’s no need to shut down the host computer during maintenance
- Fixed COM port addresses means you’re never adjusting COM port settings
- The Daisy-Chain feature makes expanding or reducing the system fast, easy, and secure
- Data encryption technology securely transmits data across networks
- With Offline Mode, any loss of connection between the DevicePort and its computer will not effect on-demand applications
- The built-in data buffer prevents any unforeseen data loss during a connection failure
- MAC addresses link the DevicePort to its host computer, ensuring the highest data security
- Low CPU requirements for the host computer keep the system stable and performing at utmost efficiency
Simplify Remote Management of HDMI Switches with DevicePort’s Easy to Use Features
This customer needs to manage 32 HDMI switches from a central station to achieve dramatic savings on overhead costs. This complex system is easy to accomplish thanks to the SUNIX Deviceport’s fast installation and simple maintenance.
The Challenges
A traditional, computer-based setup requires large amounts of hardware and a significant investment. And because RS-232 serial interface cables have length limitations, this whole system of computers will need to be housed in close proximity to the 32 HDMI switches— this makes for a very costly and complicated cable setup.
If this customer did invest in a computer-based management system using 32 COM ports they would inevitably encounter crippling CPU performance issues, rendering their costly system unreliable at best. Not to mention that, after each system failure, troubleshooting and repairs would be very expensive and time consuming.
The DevicePort Solution
Remotely Extended COM Ports via DevicePort’s Network Solutions–
Greatly Reduce Hardware, Deployment, and Management Costs
Quick Installation, Plug-N-Play, Hot-Swap Support –
Significantly Improve Management Efficiency
Should the controlling PC need replacement, simply install the DevicePort software onto an additional computer and instantly swap out the faulty PC. As long as all the RJ-45 and COM ports are still connected, the HDMI switches will be back online immediately, without requiring a complex re-installation process.
A Complicated and Inefficient Setup:
•This setup requires multiple PCs and an extremely complicated wiring setup
The Easy, Simple, and Effective DevicePort Solution:
•This setup requires just one host computer to control the entire remote management system
Additional DevicePort Advantages
- Fast and easy installation
- Even those without networking management experience can easily perform installation or maintenance
- Easily expanding ports use local area networks to significantly reduce system footprints
- Real-Time data transmitting (Real COM) without complicated IP setup
- COM Port Auto-Mapping
- Supports Plug-N-Play
- Compatible with existing software
- Provides power via Serial ports with SUNIX’s Powered COM feature (devices receive power via serial ports, bypassing the need for external power adapters)
- Simple and easy Maintenance
- Greatly reduced downtime during maintenance; swap and replace components in seconds
- With Hot-Swap support there’s no need to shut down the host computer during maintenance
- Fixed COM port addresses means you’re never adjusting COM port settings
- The Daisy-Chain feature makes expanding or reducing the system fast, easy, and secure
- Data encryption technology securely transmits data across networks
- With Offline Mode, any loss of connection between the DevicePort and its computer will not effect on-demand applications
- The built-in data buffer prevents any unforeseen data loss during a connection failure
- MAC addresses link the DevicePort to its host computer, ensuring the highest data security
- Low CPU requirements for the host computer keep the system stable and performing at utmost efficiency
Simplify Remote Management of HDMI Switches with DevicePort’s Easy to Use Features
This customer needs to manage 32 HDMI switches from a central station to achieve dramatic savings on overhead costs. This complex system is easy to accomplish thanks to the SUNIX Deviceport’s fast installation and simple maintenance.
The Challenges
A traditional, computer-based setup requires large amounts of hardware and a significant investment. And because RS-232 serial interface cables have length limitations, this whole system of computers will need to be housed in close proximity to the 32 HDMI switches— this makes for a very costly and complicated cable setup.
If this customer did invest in a computer-based management system using 32 COM ports they would inevitably encounter crippling CPU performance issues, rendering their costly system unreliable at best. Not to mention that, after each system failure, troubleshooting and repairs would be very expensive and time consuming.
The DevicePort Solution
Remotely Extended COM Ports via DevicePort’s Network Solutions–
Greatly Reduce Hardware, Deployment, and Management Costs
Quick Installation, Plug-N-Play, Hot-Swap Support –
Significantly Improve Management Efficiency
Should the controlling PC need replacement, simply install the DevicePort software onto an additional computer and instantly swap out the faulty PC. As long as all the RJ-45 and COM ports are still connected, the HDMI switches will be back online immediately, without requiring a complex re-installation process.
A Complicated and Inefficient Setup:
•This setup requires multiple PCs and an extremely complicated wiring setup
The Easy, Simple, and Effective DevicePort Solution:
•This setup requires just one host computer to control the entire remote management system
Additional DevicePort Advantages
- Fast and easy installation
- Even those without networking management experience can easily perform installation or maintenance
- Easily expanding ports use local area networks to significantly reduce system footprints
- Real-Time data transmitting (Real COM) without complicated IP setup
- COM Port Auto-Mapping
- Supports Plug-N-Play
- Compatible with existing software
- Provides power via Serial ports with SUNIX’s Powered COM feature (devices receive power via serial ports, bypassing the need for external power adapters)
- Simple and easy Maintenance
- Greatly reduced downtime during maintenance; swap and replace components in seconds
- With Hot-Swap support there’s no need to shut down the host computer during maintenance
- Fixed COM port addresses means you’re never adjusting COM port settings
- The Daisy-Chain feature makes expanding or reducing the system fast, easy, and secure
- Data encryption technology securely transmits data across networks
- With Offline Mode, any loss of connection between the DevicePort and its computer will not effect on-demand applications
- The built-in data buffer prevents any unforeseen data loss during a connection failure
- MAC addresses link the DevicePort to its host computer, ensuring the highest data security
- Low CPU requirements for the host computer keep the system stable and performing at utmost efficiency
Simplify Remote Management of HDMI Switches with DevicePort’s Easy to Use Features
This customer needs to manage 32 HDMI switches from a central station to achieve dramatic savings on overhead costs. This complex system is easy to accomplish thanks to the SUNIX Deviceport’s fast installation and simple maintenance.
The Challenges
A traditional, computer-based setup requires large amounts of hardware and a significant investment. And because RS-232 serial interface cables have length limitations, this whole system of computers will need to be housed in close proximity to the 32 HDMI switches— this makes for a very costly and complicated cable setup.
If this customer did invest in a computer-based management system using 32 COM ports they would inevitably encounter crippling CPU performance issues, rendering their costly system unreliable at best. Not to mention that, after each system failure, troubleshooting and repairs would be very expensive and time consuming.
The DevicePort Solution
Remotely Extended COM Ports via DevicePort’s Network Solutions–
Greatly Reduce Hardware, Deployment, and Management Costs
Quick Installation, Plug-N-Play, Hot-Swap Support –
Significantly Improve Management Efficiency
Should the controlling PC need replacement, simply install the DevicePort software onto an additional computer and instantly swap out the faulty PC. As long as all the RJ-45 and COM ports are still connected, the HDMI switches will be back online immediately, without requiring a complex re-installation process.
A Complicated and Inefficient Setup:
•This setup requires multiple PCs and an extremely complicated wiring setup
The Easy, Simple, and Effective DevicePort Solution:
•This setup requires just one host computer to control the entire remote management system
Additional DevicePort Advantages
- Fast and easy installation
- Even those without networking management experience can easily perform installation or maintenance
- Easily expanding ports use local area networks to significantly reduce system footprints
- Real-Time data transmitting (Real COM) without complicated IP setup
- COM Port Auto-Mapping
- Supports Plug-N-Play
- Compatible with existing software
- Provides power via Serial ports with SUNIX’s Powered COM feature (devices receive power via serial ports, bypassing the need for external power adapters)
- Simple and easy Maintenance
- Greatly reduced downtime during maintenance; swap and replace components in seconds
- With Hot-Swap support there’s no need to shut down the host computer during maintenance
- Fixed COM port addresses means you’re never adjusting COM port settings
- The Daisy-Chain feature makes expanding or reducing the system fast, easy, and secure
- Data encryption technology securely transmits data across networks
- With Offline Mode, any loss of connection between the DevicePort and its computer will not effect on-demand applications
- The built-in data buffer prevents any unforeseen data loss during a connection failure
- MAC addresses link the DevicePort to its host computer, ensuring the highest data security
- Low CPU requirements for the host computer keep the system stable and performing at utmost efficiency
