USB2302C (phased out)

USB 3.0 SuperSpeed Dual-port PCI Express Host Card with Type-C Receptacle
  • PCI Express Base Specification Revision 2.0 single-lane ( x1).
  • Compliant with Universal Serial Bus 3.0 specification.
  • Compliant with xHCI (eXtensible Host Controller Interface) specifications Revision 1.0.
  • Supports simultaneous operation of multiple USB 3.0, USB 2.0 and USB 1.1 devices.
  • Supports USB data transfer rate of 5G/480/12/1.5 Mbps.
  • Expands single external USB 3.0 Super-Speed Type-C port (DFP) on the system.
  • USB port supplies maximum +5VDC / 3000mA power output to USB device.
  • Built-in over current protection on each USB port.
  • Support device remote wakeup function from USB keyboard or mouse.
  • Hot-swapping feature allows connect/disconnect device without powering down the system.
  • Driver supports for Microsoft Windows 7, 8.x and 10 operation systems.
  • Certified by Electromagnetic Compatibility (CE, FCC, VCCI, BSMI) and RoHS approval.

Introduction

SUNIX USB2302C is a dual-port Super-Speed USB 3.0 PCI Express card, and it’s compliant with the PCI Express Generation 2 specification for host PC system. Based on USB Type-C pure DFP (Downstream Facing Port) mode, it works up to 5 Gbps for data transfer when connecting to USB 3.x compliant peripherals, while maintaining compatibility with existing USB peripheral devices. USB 3.0 performance is 10 times faster than USB 2.0 connectivity.
 
With USB Type-C Receptacle, SUNIX USB2302C sports reversible plug orientation and cable direction, which means that users will no longer need to be concerned with plug orientation/cable direction, making it easier to plug in. The new connector is smaller and thinner design, but drive higher power output capacity to USB device. SUNIX USB2302C supports 5VDC@3000mA power output to USB device with over current protection on each USB port. This card is an ideal choice for external storage devices, digital cameras, webcam, video devices, and all other USB electronic devices.

Specifications

Hardware

BUS PCI Express Spec 2.0, Single-Lane (x1)
Controller PCI Express USB 3.0 Host controller, Renesas uPD720201
USB Standard eXtensible Host Controller Interface (xHCI) Rev1.0
IRQ & IO Assigned by System

USB Communication

Interface Universal Serial Bus 3.0 / 2.0 / 1.1
Speed SuperSpeed(5Gbps), High Speed(480Mbps), Full Speed(12Mbps), Low Speed (1.5Mbps)
No. of Port 2-port
PCB Connector USB 3.0 USB Type-C port (Downstream Facing Port)
Protection ±15KV IEC61000-4-2 Air Gap Discharge
±8KV IEC61000-4-2 Contact Discharge

Power

Source SATA Power Connector Type
Output Capacity USB Type-C Port: +5VDC / Maximum 3.0A / each port
Note: Total power output capacity will be limited by system power supply.
Over Current Protection USB Type-C Port: +5VDC / Maximum 3.7A / each port
Power Consumption 1.1 W @ 3.3V (board only without power output to USB device)

Driver Support

Windows Windows 7 (X86/X64)
Windows 8.x / 10 (X86/X64) (Windows in-box driver)
Linux Linux 2.6.31 or later (Linux OS already implemented USB 3.0 driver)

Environment

Operation Temperature 0 to 60°C (32 to 140°F)
Operation Humidity 5 to 95% RH
Storage Temperature -20 to 70°C (-4 to 158°F)

Regulatory Approvals

EMC CE, FCC, VCCI, BSMI
Green RoHS, CRoHS, WEEE

Physical Characteristics

PCB Dimension 79.3 x 68.5 mm
Bracket Standard 120 mm (Low Profile 80mm)
Bracket Space 1

Support

Download Manual

Manual USB2302C Quick Installation Guide

Download Datasheet

Datasheet USB2302C Datasheet

Download Driver

Driver USB3.0 Windows Inbox Driver
OS
Windows 10 32/64 bit
Windows 8.1 32/64 bit
Windows 8.0 32/64 bit
Windows Server 2019 64bit
Windows Server 2016 64bit
Windows Server 2012 R2 64-bit
Windows Server 2012 64bit
Driver RENESAS-USB3-Host-Driver-30230-setup
Version V3.0.23.0
Update 2013-06-10 18:03:54
Size 9.1MB
OS
Windows 7 SP1 32/64 bit
Windows XP SP3 32/64 bit
Windows Vista SP2 32/64 bit
Windows Server 2008 R2 SP1 64bit
Driver USB3.0 Linux Inbox Driver
OS
Linux 2.6.31 above

USB2302C (phased out)

USB 3.0 SuperSpeed Dual-port PCI Express Host Card with Type-C Receptacle
  • PCI Express Base Specification Revision 2.0 single-lane ( x1).
  • Compliant with Universal Serial Bus 3.0 specification.
  • Compliant with xHCI (eXtensible Host Controller Interface) specifications Revision 1.0.
  • Supports simultaneous operation of multiple USB 3.0, USB 2.0 and USB 1.1 devices.
  • Supports USB data transfer rate of 5G/480/12/1.5 Mbps.
  • Expands single external USB 3.0 Super-Speed Type-C port (DFP) on the system.
  • USB port supplies maximum +5VDC / 3000mA power output to USB device.
  • Built-in over current protection on each USB port.
  • Support device remote wakeup function from USB keyboard or mouse.
  • Hot-swapping feature allows connect/disconnect device without powering down the system.
  • Driver supports for Microsoft Windows 7, 8.x and 10 operation systems.
  • Certified by Electromagnetic Compatibility (CE, FCC, VCCI, BSMI) and RoHS approval.

Introduction

SUNIX USB2302C is a dual-port Super-Speed USB 3.0 PCI Express card, and it’s compliant with the PCI Express Generation 2 specification for host PC system. Based on USB Type-C pure DFP (Downstream Facing Port) mode, it works up to 5 Gbps for data transfer when connecting to USB 3.x compliant peripherals, while maintaining compatibility with existing USB peripheral devices. USB 3.0 performance is 10 times faster than USB 2.0 connectivity.
 
With USB Type-C Receptacle, SUNIX USB2302C sports reversible plug orientation and cable direction, which means that users will no longer need to be concerned with plug orientation/cable direction, making it easier to plug in. The new connector is smaller and thinner design, but drive higher power output capacity to USB device. SUNIX USB2302C supports 5VDC@3000mA power output to USB device with over current protection on each USB port. This card is an ideal choice for external storage devices, digital cameras, webcam, video devices, and all other USB electronic devices.

Specifications

Hardware

BUS PCI Express Spec 2.0, Single-Lane (x1)
Controller PCI Express USB 3.0 Host controller, Renesas uPD720201
USB Standard eXtensible Host Controller Interface (xHCI) Rev1.0
IRQ & IO Assigned by System

USB Communication

Interface Universal Serial Bus 3.0 / 2.0 / 1.1
Speed SuperSpeed(5Gbps), High Speed(480Mbps), Full Speed(12Mbps), Low Speed (1.5Mbps)
No. of Port 2-port
PCB Connector USB 3.0 USB Type-C port (Downstream Facing Port)
Protection ±15KV IEC61000-4-2 Air Gap Discharge
±8KV IEC61000-4-2 Contact Discharge

Power

Source SATA Power Connector Type
Output Capacity USB Type-C Port: +5VDC / Maximum 3.0A / each port
Note: Total power output capacity will be limited by system power supply.
Over Current Protection USB Type-C Port: +5VDC / Maximum 3.7A / each port
Power Consumption 1.1 W @ 3.3V (board only without power output to USB device)

Driver Support

Windows Windows 7 (X86/X64)
Windows 8.x / 10 (X86/X64) (Windows in-box driver)
Linux Linux 2.6.31 or later (Linux OS already implemented USB 3.0 driver)

Environment

Operation Temperature 0 to 60°C (32 to 140°F)
Operation Humidity 5 to 95% RH
Storage Temperature -20 to 70°C (-4 to 158°F)

Regulatory Approvals

EMC CE, FCC, VCCI, BSMI
Green RoHS, CRoHS, WEEE

Physical Characteristics

PCB Dimension 79.3 x 68.5 mm
Bracket Standard 120 mm (Low Profile 80mm)
Bracket Space 1

Support

Download Manual

Manual USB2302C Quick Installation Guide

Download Datasheet

Datasheet USB2302C Datasheet

Download Driver

Driver USB3.0 Windows Inbox Driver
OS
Windows 10 32/64 bit
Windows 8.1 32/64 bit
Windows 8.0 32/64 bit
Windows Server 2019 64bit
Windows Server 2016 64bit
Windows Server 2012 R2 64-bit
Windows Server 2012 64bit
Driver RENESAS-USB3-Host-Driver-30230-setup
Version V3.0.23.0
Update 2013-06-10 18:03:54
Size 9.1MB
OS
Windows 7 SP1 32/64 bit
Windows XP SP3 32/64 bit
Windows Vista SP2 32/64 bit
Windows Server 2008 R2 SP1 64bit
Driver USB3.0 Linux Inbox Driver
OS
Linux 2.6.31 above

USB2302C (phased out)

USB 3.0 SuperSpeed Dual-port PCI Express Host Card with Type-C Receptacle
  • PCI Express Base Specification Revision 2.0 single-lane ( x1).
  • Compliant with Universal Serial Bus 3.0 specification.
  • Compliant with xHCI (eXtensible Host Controller Interface) specifications Revision 1.0.
  • Supports simultaneous operation of multiple USB 3.0, USB 2.0 and USB 1.1 devices.
  • Supports USB data transfer rate of 5G/480/12/1.5 Mbps.
  • Expands single external USB 3.0 Super-Speed Type-C port (DFP) on the system.
  • USB port supplies maximum +5VDC / 3000mA power output to USB device.
  • Built-in over current protection on each USB port.
  • Support device remote wakeup function from USB keyboard or mouse.
  • Hot-swapping feature allows connect/disconnect device without powering down the system.
  • Driver supports for Microsoft Windows 7, 8.x and 10 operation systems.
  • Certified by Electromagnetic Compatibility (CE, FCC, VCCI, BSMI) and RoHS approval.

Introduction

SUNIX USB2302C is a dual-port Super-Speed USB 3.0 PCI Express card, and it’s compliant with the PCI Express Generation 2 specification for host PC system. Based on USB Type-C pure DFP (Downstream Facing Port) mode, it works up to 5 Gbps for data transfer when connecting to USB 3.x compliant peripherals, while maintaining compatibility with existing USB peripheral devices. USB 3.0 performance is 10 times faster than USB 2.0 connectivity.
 
With USB Type-C Receptacle, SUNIX USB2302C sports reversible plug orientation and cable direction, which means that users will no longer need to be concerned with plug orientation/cable direction, making it easier to plug in. The new connector is smaller and thinner design, but drive higher power output capacity to USB device. SUNIX USB2302C supports 5VDC@3000mA power output to USB device with over current protection on each USB port. This card is an ideal choice for external storage devices, digital cameras, webcam, video devices, and all other USB electronic devices.

Specifications

Hardware

BUS PCI Express Spec 2.0, Single-Lane (x1)
Controller PCI Express USB 3.0 Host controller, Renesas uPD720201
USB Standard eXtensible Host Controller Interface (xHCI) Rev1.0
IRQ & IO Assigned by System

USB Communication

Interface Universal Serial Bus 3.0 / 2.0 / 1.1
Speed SuperSpeed(5Gbps), High Speed(480Mbps), Full Speed(12Mbps), Low Speed (1.5Mbps)
No. of Port 2-port
PCB Connector USB 3.0 USB Type-C port (Downstream Facing Port)
Protection ±15KV IEC61000-4-2 Air Gap Discharge
±8KV IEC61000-4-2 Contact Discharge

Power

Source SATA Power Connector Type
Output Capacity USB Type-C Port: +5VDC / Maximum 3.0A / each port
Note: Total power output capacity will be limited by system power supply.
Over Current Protection USB Type-C Port: +5VDC / Maximum 3.7A / each port
Power Consumption 1.1 W @ 3.3V (board only without power output to USB device)

Driver Support

Windows Windows 7 (X86/X64)
Windows 8.x / 10 (X86/X64) (Windows in-box driver)
Linux Linux 2.6.31 or later (Linux OS already implemented USB 3.0 driver)

Environment

Operation Temperature 0 to 60°C (32 to 140°F)
Operation Humidity 5 to 95% RH
Storage Temperature -20 to 70°C (-4 to 158°F)

Regulatory Approvals

EMC CE, FCC, VCCI, BSMI
Green RoHS, CRoHS, WEEE

Physical Characteristics

PCB Dimension 79.3 x 68.5 mm
Bracket Standard 120 mm (Low Profile 80mm)
Bracket Space 1

Support

Download Manual

Manual USB2302C Quick Installation Guide

Download Datasheet

Datasheet USB2302C Datasheet

Download Driver

Driver USB3.0 Windows Inbox Driver
OS
Windows 10 32/64 bit
Windows 8.1 32/64 bit
Windows 8.0 32/64 bit
Windows Server 2019 64bit
Windows Server 2016 64bit
Windows Server 2012 R2 64-bit
Windows Server 2012 64bit
Driver RENESAS-USB3-Host-Driver-30230-setup
Version V3.0.23.0
Update 2013-06-10 18:03:54
Size 9.1MB
OS
Windows 7 SP1 32/64 bit
Windows XP SP3 32/64 bit
Windows Vista SP2 32/64 bit
Windows Server 2008 R2 SP1 64bit
Driver USB3.0 Linux Inbox Driver
OS
Linux 2.6.31 above

USB2302C (phased out)

USB 3.0 SuperSpeed Dual-port PCI Express Host Card with Type-C Receptacle
  • PCI Express Base Specification Revision 2.0 single-lane ( x1).
  • Compliant with Universal Serial Bus 3.0 specification.
  • Compliant with xHCI (eXtensible Host Controller Interface) specifications Revision 1.0.
  • Supports simultaneous operation of multiple USB 3.0, USB 2.0 and USB 1.1 devices.
  • Supports USB data transfer rate of 5G/480/12/1.5 Mbps.
  • Expands single external USB 3.0 Super-Speed Type-C port (DFP) on the system.
  • USB port supplies maximum +5VDC / 3000mA power output to USB device.
  • Built-in over current protection on each USB port.
  • Support device remote wakeup function from USB keyboard or mouse.
  • Hot-swapping feature allows connect/disconnect device without powering down the system.
  • Driver supports for Microsoft Windows 7, 8.x and 10 operation systems.
  • Certified by Electromagnetic Compatibility (CE, FCC, VCCI, BSMI) and RoHS approval.
SUNIX USB2302C is a dual-port Super-Speed USB 3.0 PCI Express card, and it’s compliant with the PCI Express Generation 2 specification for host PC system. Based on USB Type-C pure DFP (Downstream Facing Port) mode, it works up to 5 Gbps for data transfer when connecting to USB 3.x compliant peripherals, while maintaining compatibility with existing USB peripheral devices. USB 3.0 performance is 10 times faster than USB 2.0 connectivity.
 
With USB Type-C Receptacle, SUNIX USB2302C sports reversible plug orientation and cable direction, which means that users will no longer need to be concerned with plug orientation/cable direction, making it easier to plug in. The new connector is smaller and thinner design, but drive higher power output capacity to USB device. SUNIX USB2302C supports 5VDC@3000mA power output to USB device with over current protection on each USB port. This card is an ideal choice for external storage devices, digital cameras, webcam, video devices, and all other USB electronic devices.

Introduction

SUNIX USB2302C is a dual-port Super-Speed USB 3.0 PCI Express card, and it’s compliant with the PCI Express Generation 2 specification for host PC system. Based on USB Type-C pure DFP (Downstream Facing Port) mode, it works up to 5 Gbps for data transfer when connecting to USB 3.x compliant peripherals, while maintaining compatibility with existing USB peripheral devices. USB 3.0 performance is 10 times faster than USB 2.0 connectivity.
 
With USB Type-C Receptacle, SUNIX USB2302C sports reversible plug orientation and cable direction, which means that users will no longer need to be concerned with plug orientation/cable direction, making it easier to plug in. The new connector is smaller and thinner design, but drive higher power output capacity to USB device. SUNIX USB2302C supports 5VDC@3000mA power output to USB device with over current protection on each USB port. This card is an ideal choice for external storage devices, digital cameras, webcam, video devices, and all other USB electronic devices.

Specifications

Hardware

BUS PCI Express Spec 2.0, Single-Lane (x1)
Controller PCI Express USB 3.0 Host controller, Renesas uPD720201
USB Standard eXtensible Host Controller Interface (xHCI) Rev1.0
IRQ & IO Assigned by System

USB Communication

Interface Universal Serial Bus 3.0 / 2.0 / 1.1
Speed SuperSpeed(5Gbps), High Speed(480Mbps), Full Speed(12Mbps), Low Speed (1.5Mbps)
No. of Port 2-port
PCB Connector USB 3.0 USB Type-C port (Downstream Facing Port)
Protection ±15KV IEC61000-4-2 Air Gap Discharge
±8KV IEC61000-4-2 Contact Discharge

Power

Source SATA Power Connector Type
Output Capacity USB Type-C Port: +5VDC / Maximum 3.0A / each port
Note: Total power output capacity will be limited by system power supply.
Over Current Protection USB Type-C Port: +5VDC / Maximum 3.7A / each port
Power Consumption 1.1 W @ 3.3V (board only without power output to USB device)

Driver Support

Windows Windows 7 (X86/X64)
Windows 8.x / 10 (X86/X64) (Windows in-box driver)
Linux Linux 2.6.31 or later (Linux OS already implemented USB 3.0 driver)

Environment

Operation Temperature 0 to 60°C (32 to 140°F)
Operation Humidity 5 to 95% RH
Storage Temperature -20 to 70°C (-4 to 158°F)

Regulatory Approvals

EMC CE, FCC, VCCI, BSMI
Green RoHS, CRoHS, WEEE

Physical Characteristics

PCB Dimension 79.3 x 68.5 mm
Bracket Standard 120 mm (Low Profile 80mm)
Bracket Space 1

Support

Download Manual

Manual USB2302C Quick Installation Guide

Download Datasheet

Datasheet USB2302C Datasheet

Download Driver

Driver USB3.0 Windows Inbox Driver
OS
Windows 10 32/64 bit
Windows 8.1 32/64 bit
Windows 8.0 32/64 bit
Windows Server 2019 64bit
Windows Server 2016 64bit
Windows Server 2012 R2 64-bit
Windows Server 2012 64bit
Driver RENESAS-USB3-Host-Driver-30230-setup
Version V3.0.23.0
Update 2013-06-10 18:03:54
Size 9.1MB
OS
Windows 7 SP1 32/64 bit
Windows XP SP3 32/64 bit
Windows Vista SP2 32/64 bit
Windows Server 2008 R2 SP1 64bit
Driver USB3.0 Linux Inbox Driver
OS
Linux 2.6.31 above