MIO6469H

1-port RS-232 & 1-port Parallel High Speed PCI Express Multi-I/O Board
  • Expands 1-port RS-232 COM and 1-port IEEE1284 LPT on system.
  • RS-232 Serial port data communication speeds up to 921.6Kbps.
  • With high reliable SUNIX SUN2410 native PCI Express 16C950 UART and IEEE1284 controller.
  • Designed to meet PCI Express Base Specification Revision 2.0.
  • Supports x1, x2, x4, x8, x16 (lane) PCI Express Bus connector keys.
  • On-chip hardware auto flow control to guarantee no data loss.
  • Built-in ± 15KV ESD protection for all serial signals meets IEC1000-4-2 standard.
  • Support IEEE 1284-1994 parallel port standard.
    * ECP(Enhance Capacity Port) / EPP(Enhance Parallel Port).
    * SPP (Standard Parallel Port) / BPP (Bi-direction Parallel Port).
  • Plug-n-Play, I/O address and IRQ assigned by system.
  • Certified by CE, FCC, RoHS, and Microsoft WHQL approval.
  • Support Microsoft Windows, Linux, and DOS.

Introduction

The majority of today’s motherboards are not equipped with any RS-232 or Parallel port. With SUNIX MIO6469H Multi I/O board, users can expand one RS-232 COM and one IEEE1284 LPT ports to their system, allowing them to use serial and parallel devices further. This board is compatible with PCI Express x1, x2, x4, x8 and x16 lane, allowing the board to be installed in virtually any PC system. SUNIX MIO6469H built-in SUNIX high performance and realizable native PCI Express controller, and as well built with many of SUNIX advanced features and technologies, making it the advanced and high efficient solution for commercial and industrial automation application.

Specifications

General

Interface RS-232 and IEEE1284
Controller SUNIX SUN2410 (16C950 UART Compatible)
BUS PCI Express Spec 2.0, Single-Lane (x1)
IRQ & IO Assigned by System

Serial Communication

Interface RS-232
No. of Port 1-port
FIFO 128byte Hardware
Signal DCD, TxD, RxD, RTS, CTS, DTR, DSR, GND, RI
Baud rate 50bps ~ 921.6Kbps
Stop bit 1, 1.5, 2
Parity even, odd, none, mark, space
Flow Control None, Xon/Xoff, RTS/CTS
Protection ±15KV ESD protection for each signal Human Body Model (HBM)
±15KV IEC1000-4-2 Air Gap Discharge
±8KV IEC1000-4-2 Contact Discharge
PCB Connector DB9 Male

Parallel Communication

Interface IEEE1284
No. of Port 1-port
Mode SPP / ECP / EPP / BPP
FIFO 16byte Hardware
Speed Maximum 1.8MBps
PCB Connector DB25 Female

Driver Support

Windows Client XP / Vista / 7 / 8.x / 10 (X86/X64)
Windows Server 2003 / 2008 / 2012 / 2016 (X64)
Windows Embedded Windows XP Embedded / POSReady 2009 / POSReady / Embedded System 2009
Linux Linux 2.x / 3.x / 4.x
DOS DOS

Regulatory Approvals

Hardware CE EN55022 Class B, EN55024, EN61000-3-2, EN61000-3-3, VCCI Class B
FCC Part 15 Class B, BSMI: CNS13438, RoHS
Software Microsoft WHQL Windows
• Windows Client: XP / Vista / 7 / 8.x / 10 (X86/X64)
• Windows Server: 2003 / 2008 / 2012 / 2016 (X64)

Environment

Operation Temperature 0 to 60°C (32 to 140°F)
Operation Humidity 5 to 95% RH
Storage Temperature -20 to 85°C (-4 to 185°F)

Dimension

PCB Dimension 65 x 99 mm
Bracket Standard 121 mm
Bracket Space 1

 

Note:
* LPT port does not support LPT Key Locker Parallel device.
* LPT port does not support legacy 278/378/3BC ISA address under Microsoft Windows nor Linux operation systems.
* ECP / EPP / SPP / BPP modes work under Windows, and Linux driver only supports SPP mode.

Accessories

Optional Accessories

PCIe Add-in card Holder
  • Part No.: 5013-PCIFX1C00-QCN
FILM:PCIe Add-in card Holder Introduction
PCIe Add-in card Holder

Support

Download Manual

Manual 771-9PCIEMIO2-S01
Manual Parallel LPT Port Configuration

Download Datasheet

Datasheet MIO6469H-Datasheet-V11

Download Driver

Driver SUN1999Driver_V9.0.1.0_(WHQL)
Version Ver 9.0.1.0
Update 2018-04-11 17:39:11
Size 9.3MB
OS
Windows 10 RS3 32/64 bit
Windows 10 RS2 32/64 bit
Windows 10 RS1 32/64 bit
Windows Server 2016 64bit
Windows 10 2016 LTSB 32/64 bit
Windows 10 S 32/64 bit
Driver SUN1999Driver V8.2.0.0 (WHQL)
Version Ver 8.2.0.0
Update 2016-03-18 09:38:47
Size 4.8MB
OS
Windows 8.1 32/64 bit
Windows 8.0 32/64 bit
Windows 7 SP1 32/64 bit
Windows Vista SP2 32/64 bit
Windows Server 2012 R2 64-bit
Windows Server 2012 64bit
Windows Server 2008 R2 SP1 64bit
Windows Embedded POSReady 2009
Driver SUN1999Driver_V8.1.5.0
Version Ver 8.1.5.0
Update 2018-04-20 13:33:07
Size 4.5MB
OS
Windows XP SP3 32/64 bit
Driver SUN1999Driver V7.2.0.0 (WHQL)
Version V7.2.0.0 (WHQL)
Update 2013-12-02 18:00:44
Size 4.3MB
OS
Windows 2000
Driver Wince5.0
Version Ver.1.1.0.0
Update 2011-06-10 11:50:29
Size 280KB
OS
Windows CE 5.0
Driver WinCE 4.2_ Driver_V1.1.0.0.zip
Version Ver.1.1.0.0
Update 2011-06-10 11:50:00
Size 236KB
OS
Windows CE 4.2
Driver snx_V2.0.4.3
Version Ver 2.0.4.3
Update 2017-11-22 18:01:14
Size 70.9KB
OS
Linux 2.4x/2.6x/3.x/4.x
Driver SUNDOS1.00.00.003.zip
Version V1.00.00.006
Update 2014-08-19 10:36:25
Size 21KB
OS
DOS

MIO6469H

1-port RS-232 & 1-port Parallel High Speed PCI Express Multi-I/O Board
  • Expands 1-port RS-232 COM and 1-port IEEE1284 LPT on system.
  • RS-232 Serial port data communication speeds up to 921.6Kbps.
  • With high reliable SUNIX SUN2410 native PCI Express 16C950 UART and IEEE1284 controller.
  • Designed to meet PCI Express Base Specification Revision 2.0.
  • Supports x1, x2, x4, x8, x16 (lane) PCI Express Bus connector keys.
  • On-chip hardware auto flow control to guarantee no data loss.
  • Built-in ± 15KV ESD protection for all serial signals meets IEC1000-4-2 standard.
  • Support IEEE 1284-1994 parallel port standard.
    * ECP(Enhance Capacity Port) / EPP(Enhance Parallel Port).
    * SPP (Standard Parallel Port) / BPP (Bi-direction Parallel Port).
  • Plug-n-Play, I/O address and IRQ assigned by system.
  • Certified by CE, FCC, RoHS, and Microsoft WHQL approval.
  • Support Microsoft Windows, Linux, and DOS.

Introduction

The majority of today’s motherboards are not equipped with any RS-232 or Parallel port. With SUNIX MIO6469H Multi I/O board, users can expand one RS-232 COM and one IEEE1284 LPT ports to their system, allowing them to use serial and parallel devices further. This board is compatible with PCI Express x1, x2, x4, x8 and x16 lane, allowing the board to be installed in virtually any PC system. SUNIX MIO6469H built-in SUNIX high performance and realizable native PCI Express controller, and as well built with many of SUNIX advanced features and technologies, making it the advanced and high efficient solution for commercial and industrial automation application.

Specifications

General

Interface RS-232 and IEEE1284
Controller SUNIX SUN2410 (16C950 UART Compatible)
BUS PCI Express Spec 2.0, Single-Lane (x1)
IRQ & IO Assigned by System

Serial Communication

Interface RS-232
No. of Port 1-port
FIFO 128byte Hardware
Signal DCD, TxD, RxD, RTS, CTS, DTR, DSR, GND, RI
Baud rate 50bps ~ 921.6Kbps
Stop bit 1, 1.5, 2
Parity even, odd, none, mark, space
Flow Control None, Xon/Xoff, RTS/CTS
Protection ±15KV ESD protection for each signal Human Body Model (HBM)
±15KV IEC1000-4-2 Air Gap Discharge
±8KV IEC1000-4-2 Contact Discharge
PCB Connector DB9 Male

Parallel Communication

Interface IEEE1284
No. of Port 1-port
Mode SPP / ECP / EPP / BPP
FIFO 16byte Hardware
Speed Maximum 1.8MBps
PCB Connector DB25 Female

Driver Support

Windows Client XP / Vista / 7 / 8.x / 10 (X86/X64)
Windows Server 2003 / 2008 / 2012 / 2016 (X64)
Windows Embedded Windows XP Embedded / POSReady 2009 / POSReady / Embedded System 2009
Linux Linux 2.x / 3.x / 4.x
DOS DOS

Regulatory Approvals

Hardware CE EN55022 Class B, EN55024, EN61000-3-2, EN61000-3-3, VCCI Class B
FCC Part 15 Class B, BSMI: CNS13438, RoHS
Software Microsoft WHQL Windows
• Windows Client: XP / Vista / 7 / 8.x / 10 (X86/X64)
• Windows Server: 2003 / 2008 / 2012 / 2016 (X64)

Environment

Operation Temperature 0 to 60°C (32 to 140°F)
Operation Humidity 5 to 95% RH
Storage Temperature -20 to 85°C (-4 to 185°F)

Dimension

PCB Dimension 65 x 99 mm
Bracket Standard 121 mm
Bracket Space 1

 

Note:
* LPT port does not support LPT Key Locker Parallel device.
* LPT port does not support legacy 278/378/3BC ISA address under Microsoft Windows nor Linux operation systems.
* ECP / EPP / SPP / BPP modes work under Windows, and Linux driver only supports SPP mode.

Accessories

Optional Accessories

PCIe Add-in card Holder
  • Part No.: 5013-PCIFX1C00-QCN
FILM:PCIe Add-in card Holder Introduction
PCIe Add-in card Holder

Support

Download Manual

Manual 771-9PCIEMIO2-S01
Manual Parallel LPT Port Configuration

Download Datasheet

Datasheet MIO6469H-Datasheet-V11

Download Driver

Driver SUN1999Driver_V9.0.1.0_(WHQL)
Version Ver 9.0.1.0
Update 2018-04-11 17:39:11
Size 9.3MB
OS
Windows 10 RS3 32/64 bit
Windows 10 RS2 32/64 bit
Windows 10 RS1 32/64 bit
Windows Server 2016 64bit
Windows 10 2016 LTSB 32/64 bit
Windows 10 S 32/64 bit
Driver SUN1999Driver V8.2.0.0 (WHQL)
Version Ver 8.2.0.0
Update 2016-03-18 09:38:47
Size 4.8MB
OS
Windows 8.1 32/64 bit
Windows 8.0 32/64 bit
Windows 7 SP1 32/64 bit
Windows Vista SP2 32/64 bit
Windows Server 2012 R2 64-bit
Windows Server 2012 64bit
Windows Server 2008 R2 SP1 64bit
Windows Embedded POSReady 2009
Driver SUN1999Driver_V8.1.5.0
Version Ver 8.1.5.0
Update 2018-04-20 13:33:07
Size 4.5MB
OS
Windows XP SP3 32/64 bit
Driver SUN1999Driver V7.2.0.0 (WHQL)
Version V7.2.0.0 (WHQL)
Update 2013-12-02 18:00:44
Size 4.3MB
OS
Windows 2000
Driver Wince5.0
Version Ver.1.1.0.0
Update 2011-06-10 11:50:29
Size 280KB
OS
Windows CE 5.0
Driver WinCE 4.2_ Driver_V1.1.0.0.zip
Version Ver.1.1.0.0
Update 2011-06-10 11:50:00
Size 236KB
OS
Windows CE 4.2
Driver snx_V2.0.4.3
Version Ver 2.0.4.3
Update 2017-11-22 18:01:14
Size 70.9KB
OS
Linux 2.4x/2.6x/3.x/4.x
Driver SUNDOS1.00.00.003.zip
Version V1.00.00.006
Update 2014-08-19 10:36:25
Size 21KB
OS
DOS

MIO6469H

1-port RS-232 & 1-port Parallel High Speed PCI Express Multi-I/O Board
  • Expands 1-port RS-232 COM and 1-port IEEE1284 LPT on system.
  • RS-232 Serial port data communication speeds up to 921.6Kbps.
  • With high reliable SUNIX SUN2410 native PCI Express 16C950 UART and IEEE1284 controller.
  • Designed to meet PCI Express Base Specification Revision 2.0.
  • Supports x1, x2, x4, x8, x16 (lane) PCI Express Bus connector keys.
  • On-chip hardware auto flow control to guarantee no data loss.
  • Built-in ± 15KV ESD protection for all serial signals meets IEC1000-4-2 standard.
  • Support IEEE 1284-1994 parallel port standard.
    * ECP(Enhance Capacity Port) / EPP(Enhance Parallel Port).
    * SPP (Standard Parallel Port) / BPP (Bi-direction Parallel Port).
  • Plug-n-Play, I/O address and IRQ assigned by system.
  • Certified by CE, FCC, RoHS, and Microsoft WHQL approval.
  • Support Microsoft Windows, Linux, and DOS.

Introduction

The majority of today’s motherboards are not equipped with any RS-232 or Parallel port. With SUNIX MIO6469H Multi I/O board, users can expand one RS-232 COM and one IEEE1284 LPT ports to their system, allowing them to use serial and parallel devices further. This board is compatible with PCI Express x1, x2, x4, x8 and x16 lane, allowing the board to be installed in virtually any PC system. SUNIX MIO6469H built-in SUNIX high performance and realizable native PCI Express controller, and as well built with many of SUNIX advanced features and technologies, making it the advanced and high efficient solution for commercial and industrial automation application.

Specifications

General

Interface RS-232 and IEEE1284
Controller SUNIX SUN2410 (16C950 UART Compatible)
BUS PCI Express Spec 2.0, Single-Lane (x1)
IRQ & IO Assigned by System

Serial Communication

Interface RS-232
No. of Port 1-port
FIFO 128byte Hardware
Signal DCD, TxD, RxD, RTS, CTS, DTR, DSR, GND, RI
Baud rate 50bps ~ 921.6Kbps
Stop bit 1, 1.5, 2
Parity even, odd, none, mark, space
Flow Control None, Xon/Xoff, RTS/CTS
Protection ±15KV ESD protection for each signal Human Body Model (HBM)
±15KV IEC1000-4-2 Air Gap Discharge
±8KV IEC1000-4-2 Contact Discharge
PCB Connector DB9 Male

Parallel Communication

Interface IEEE1284
No. of Port 1-port
Mode SPP / ECP / EPP / BPP
FIFO 16byte Hardware
Speed Maximum 1.8MBps
PCB Connector DB25 Female

Driver Support

Windows Client XP / Vista / 7 / 8.x / 10 (X86/X64)
Windows Server 2003 / 2008 / 2012 / 2016 (X64)
Windows Embedded Windows XP Embedded / POSReady 2009 / POSReady / Embedded System 2009
Linux Linux 2.x / 3.x / 4.x
DOS DOS

Regulatory Approvals

Hardware CE EN55022 Class B, EN55024, EN61000-3-2, EN61000-3-3, VCCI Class B
FCC Part 15 Class B, BSMI: CNS13438, RoHS
Software Microsoft WHQL Windows
• Windows Client: XP / Vista / 7 / 8.x / 10 (X86/X64)
• Windows Server: 2003 / 2008 / 2012 / 2016 (X64)

Environment

Operation Temperature 0 to 60°C (32 to 140°F)
Operation Humidity 5 to 95% RH
Storage Temperature -20 to 85°C (-4 to 185°F)

Dimension

PCB Dimension 65 x 99 mm
Bracket Standard 121 mm
Bracket Space 1

 

Note:
* LPT port does not support LPT Key Locker Parallel device.
* LPT port does not support legacy 278/378/3BC ISA address under Microsoft Windows nor Linux operation systems.
* ECP / EPP / SPP / BPP modes work under Windows, and Linux driver only supports SPP mode.

Accessories

Optional Accessories

PCIe Add-in card Holder
  • Part No.: 5013-PCIFX1C00-QCN
FILM:PCIe Add-in card Holder Introduction
PCIe Add-in card Holder

Support

Download Manual

Manual 771-9PCIEMIO2-S01
Manual Parallel LPT Port Configuration

Download Datasheet

Datasheet MIO6469H-Datasheet-V11

Download Driver

Driver SUN1999Driver_V9.0.1.0_(WHQL)
Version Ver 9.0.1.0
Update 2018-04-11 17:39:11
Size 9.3MB
OS
Windows 10 RS3 32/64 bit
Windows 10 RS2 32/64 bit
Windows 10 RS1 32/64 bit
Windows Server 2016 64bit
Windows 10 2016 LTSB 32/64 bit
Windows 10 S 32/64 bit
Driver SUN1999Driver V8.2.0.0 (WHQL)
Version Ver 8.2.0.0
Update 2016-03-18 09:38:47
Size 4.8MB
OS
Windows 8.1 32/64 bit
Windows 8.0 32/64 bit
Windows 7 SP1 32/64 bit
Windows Vista SP2 32/64 bit
Windows Server 2012 R2 64-bit
Windows Server 2012 64bit
Windows Server 2008 R2 SP1 64bit
Windows Embedded POSReady 2009
Driver SUN1999Driver_V8.1.5.0
Version Ver 8.1.5.0
Update 2018-04-20 13:33:07
Size 4.5MB
OS
Windows XP SP3 32/64 bit
Driver SUN1999Driver V7.2.0.0 (WHQL)
Version V7.2.0.0 (WHQL)
Update 2013-12-02 18:00:44
Size 4.3MB
OS
Windows 2000
Driver Wince5.0
Version Ver.1.1.0.0
Update 2011-06-10 11:50:29
Size 280KB
OS
Windows CE 5.0
Driver WinCE 4.2_ Driver_V1.1.0.0.zip
Version Ver.1.1.0.0
Update 2011-06-10 11:50:00
Size 236KB
OS
Windows CE 4.2
Driver snx_V2.0.4.3
Version Ver 2.0.4.3
Update 2017-11-22 18:01:14
Size 70.9KB
OS
Linux 2.4x/2.6x/3.x/4.x
Driver SUNDOS1.00.00.003.zip
Version V1.00.00.006
Update 2014-08-19 10:36:25
Size 21KB
OS
DOS

MIO6469H

1-port RS-232 & 1-port Parallel High Speed PCI Express Multi-I/O Board
  • Expands 1-port RS-232 COM and 1-port IEEE1284 LPT on system.
  • RS-232 Serial port data communication speeds up to 921.6Kbps.
  • With high reliable SUNIX SUN2410 native PCI Express 16C950 UART and IEEE1284 controller.
  • Designed to meet PCI Express Base Specification Revision 2.0.
  • Supports x1, x2, x4, x8, x16 (lane) PCI Express Bus connector keys.
  • On-chip hardware auto flow control to guarantee no data loss.
  • Built-in ± 15KV ESD protection for all serial signals meets IEC1000-4-2 standard.
  • Support IEEE 1284-1994 parallel port standard.
    * ECP(Enhance Capacity Port) / EPP(Enhance Parallel Port).
    * SPP (Standard Parallel Port) / BPP (Bi-direction Parallel Port).
  • Plug-n-Play, I/O address and IRQ assigned by system.
  • Certified by CE, FCC, RoHS, and Microsoft WHQL approval.
  • Support Microsoft Windows, Linux, and DOS.

The majority of today’s motherboards are not equipped with any RS-232 or Parallel port. With SUNIX MIO6469H Multi I/O board, users can expand one RS-232 COM and one IEEE1284 LPT ports to their system, allowing them to use serial and parallel devices further. This board is compatible with PCI Express x1, x2, x4, x8 and x16 lane, allowing the board to be installed in virtually any PC system. SUNIX MIO6469H built-in SUNIX high performance and realizable native PCI Express controller, and as well built with many of SUNIX advanced features and technologies, making it the advanced and high efficient solution for commercial and industrial automation application.

Introduction

The majority of today’s motherboards are not equipped with any RS-232 or Parallel port. With SUNIX MIO6469H Multi I/O board, users can expand one RS-232 COM and one IEEE1284 LPT ports to their system, allowing them to use serial and parallel devices further. This board is compatible with PCI Express x1, x2, x4, x8 and x16 lane, allowing the board to be installed in virtually any PC system. SUNIX MIO6469H built-in SUNIX high performance and realizable native PCI Express controller, and as well built with many of SUNIX advanced features and technologies, making it the advanced and high efficient solution for commercial and industrial automation application.

Specifications

General

Interface RS-232 and IEEE1284
Controller SUNIX SUN2410 (16C950 UART Compatible)
BUS PCI Express Spec 2.0, Single-Lane (x1)
IRQ & IO Assigned by System

Serial Communication

Interface RS-232
No. of Port 1-port
FIFO 128byte Hardware
Signal DCD, TxD, RxD, RTS, CTS, DTR, DSR, GND, RI
Baud rate 50bps ~ 921.6Kbps
Stop bit 1, 1.5, 2
Parity even, odd, none, mark, space
Flow Control None, Xon/Xoff, RTS/CTS
Protection ±15KV ESD protection for each signal Human Body Model (HBM)
±15KV IEC1000-4-2 Air Gap Discharge
±8KV IEC1000-4-2 Contact Discharge
PCB Connector DB9 Male

Parallel Communication

Interface IEEE1284
No. of Port 1-port
Mode SPP / ECP / EPP / BPP
FIFO 16byte Hardware
Speed Maximum 1.8MBps
PCB Connector DB25 Female

Driver Support

Windows Client XP / Vista / 7 / 8.x / 10 (X86/X64)
Windows Server 2003 / 2008 / 2012 / 2016 (X64)
Windows Embedded Windows XP Embedded / POSReady 2009 / POSReady / Embedded System 2009
Linux Linux 2.x / 3.x / 4.x
DOS DOS

Regulatory Approvals

Hardware CE EN55022 Class B, EN55024, EN61000-3-2, EN61000-3-3, VCCI Class B
FCC Part 15 Class B, BSMI: CNS13438, RoHS
Software Microsoft WHQL Windows
• Windows Client: XP / Vista / 7 / 8.x / 10 (X86/X64)
• Windows Server: 2003 / 2008 / 2012 / 2016 (X64)

Environment

Operation Temperature 0 to 60°C (32 to 140°F)
Operation Humidity 5 to 95% RH
Storage Temperature -20 to 85°C (-4 to 185°F)

Dimension

PCB Dimension 65 x 99 mm
Bracket Standard 121 mm
Bracket Space 1

 

Note:
* LPT port does not support LPT Key Locker Parallel device.
* LPT port does not support legacy 278/378/3BC ISA address under Microsoft Windows nor Linux operation systems.
* ECP / EPP / SPP / BPP modes work under Windows, and Linux driver only supports SPP mode.

Accessories

Optional Accessories

PCIe Add-in card Holder
  • Part No.: 5013-PCIFX1C00-QCN
FILM:PCIe Add-in card Holder Introduction
PCIe Add-in card Holder

Support

Download Manual

Manual 771-9PCIEMIO2-S01
Manual Parallel LPT Port Configuration

Download Datasheet

Datasheet MIO6469H-Datasheet-V11

Download Driver

Driver SUN1999Driver_V9.0.1.0_(WHQL)
Version Ver 9.0.1.0
Update 2018-04-11 17:39:11
Size 9.3MB
OS
Windows 10 RS3 32/64 bit
Windows 10 RS2 32/64 bit
Windows 10 RS1 32/64 bit
Windows Server 2016 64bit
Windows 10 2016 LTSB 32/64 bit
Windows 10 S 32/64 bit
Driver SUN1999Driver V8.2.0.0 (WHQL)
Version Ver 8.2.0.0
Update 2016-03-18 09:38:47
Size 4.8MB
OS
Windows 8.1 32/64 bit
Windows 8.0 32/64 bit
Windows 7 SP1 32/64 bit
Windows Vista SP2 32/64 bit
Windows Server 2012 R2 64-bit
Windows Server 2012 64bit
Windows Server 2008 R2 SP1 64bit
Windows Embedded POSReady 2009
Driver SUN1999Driver_V8.1.5.0
Version Ver 8.1.5.0
Update 2018-04-20 13:33:07
Size 4.5MB
OS
Windows XP SP3 32/64 bit
Driver SUN1999Driver V7.2.0.0 (WHQL)
Version V7.2.0.0 (WHQL)
Update 2013-12-02 18:00:44
Size 4.3MB
OS
Windows 2000
Driver Wince5.0
Version Ver.1.1.0.0
Update 2011-06-10 11:50:29
Size 280KB
OS
Windows CE 5.0
Driver WinCE 4.2_ Driver_V1.1.0.0.zip
Version Ver.1.1.0.0
Update 2011-06-10 11:50:00
Size 236KB
OS
Windows CE 4.2
Driver snx_V2.0.4.3
Version Ver 2.0.4.3
Update 2017-11-22 18:01:14
Size 70.9KB
OS
Linux 2.4x/2.6x/3.x/4.x
Driver SUNDOS1.00.00.003.zip
Version V1.00.00.006
Update 2014-08-19 10:36:25
Size 21KB
OS
DOS